[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ddf6d8cf-8d35-4dcf-b156-d6e221d0ddf8@microchip.com>
Date: Mon, 30 Sep 2024 04:07:08 +0000
From: <Charan.Pedumuru@...rochip.com>
To: <mkl@...gutronix.de>
CC: <mailhol.vincent@...adoo.fr>, <davem@...emloft.net>,
<edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>,
<robh@...nel.org>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<Nicolas.Ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
<claudiu.beznea@...on.dev>, <linux-can@...r.kernel.org>,
<netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] dt-bindings: net: can: atmel: Convert to json schema
On 23/09/24 16:27, Marc Kleine-Budde wrote:
> On 20.09.2024 04:51:57,Charan.Pedumuru@...rochip.com wrote:
>>>> +allOf:
>>>> + - $ref: can-controller.yaml#
>>>> + - if:
>>>> + properties:
>>>> + compatible:
>>>> + contains:
>>>> + enum:
>>>> + - microchip,sam9x60-can
>>>> + then:
>>>> + required:
>>>> + - compatible
>>>> + - reg
>>>> + - interrupts
>>>> + - clocks
>>>> + - clock-names
>>> AFAICS clock-names is required for all compatibles.
>> In our case only sam9x60 is using clock-names property.
> No, the driver uses "clk_get(&pdev->dev, "can_clk")", so this property
> is mandatory.
Yes, what you said was correct, it was our mistake. I will remove the if
statements and make
clocks and clock-names as default required properties. I will fix this
in next revision.
>
> regards,
> Marc
>
> -- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux |
> https://www.pengutronix.de | Vertretung Nürnberg | Phone:
> +49-5121-206917-129 | Amtsgericht Hildesheim, HRA 2686 | Fax:
> +49-5121-206917-9 |
--
Best Regards,
Charan.
Powered by blists - more mailing lists