linux-kernel - [PATCH v5 4/6] i3c: master: svc: use spin_lock_irqsave at svc_i3c_master_ibi

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241001-svc-i3c-hj-v5-4-480ab8aed849@nxp.com>
Date: Tue, 01 Oct 2024 12:02:53 -0400
From: Frank Li <Frank.Li@....com>
To: Miquel Raynal <miquel.raynal@...tlin.com>, 
 Conor Culhane <conor.culhane@...vaco.com>, 
 Alexandre Belloni <alexandre.belloni@...tlin.com>
Cc: linux-i3c@...ts.infradead.org, linux-kernel@...r.kernel.org, 
 imx@...ts.linux.dev, Frank Li <Frank.Li@....com>
Subject: [PATCH v5 4/6] i3c: master: svc: use spin_lock_irqsave at
 svc_i3c_master_ibi_work()

According to I3C spec ver 1.1, 09-Jun-2021, section 5.1.2.5:

The I3C Controller shall hold SCL low while the Bus is in ACK/NACK Phase of
I3C/I2C transfer. But maximum stall time is 100us. The IRQs have to be
disabled to prevent schedule during the whole I3C transaction, otherwise,
the I3C bus timeout may happen if any irq or schedule happen during
transaction.

Replace mutex with spin_lock_irqsave() to avoid stalling SCL more than
100us.

Signed-off-by: Frank Li <Frank.Li@....com>
---
Change from v3-v4
- improve commit message
- needn't mutex here, other place already use spin_lock_saveirq to protent
i3c transfer.
---
 drivers/i3c/master/svc-i3c-master.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 5df0ec02d73ce..1ee6ce186195c 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -436,7 +436,16 @@ static void svc_i3c_master_ibi_work(struct work_struct *work)
 	u32 status, val;
 	int ret;
 
-	mutex_lock(&master->lock);
+	/*
+	 * According to I3C spec ver 1.1, 09-Jun-2021, section 5.1.2.5:
+	 *
+	 * The I3C Controller shall hold SCL low while the Bus is in ACK/NACK Phase of I3C/I2C
+	 * transfer. But maximum stall time is 100us. The IRQs have to be disabled to prevent
+	 * schedule during the whole I3C transaction, otherwise, the I3C bus timeout may happen if
+	 * any irq or schedule happen during transaction.
+	 */
+	guard(spinlock_irqsave)(&master->xferqueue.lock);
+
 	/*
 	 * IBIWON may be set before SVC_I3C_MCTRL_REQUEST_AUTO_IBI, causing
 	 * readl_relaxed_poll_timeout() to return immediately. Consequently,
@@ -456,7 +465,7 @@ static void svc_i3c_master_ibi_work(struct work_struct *work)
 	       master->regs + SVC_I3C_MCTRL);
 
 	/* Wait for IBIWON, should take approximately 100us */
-	ret = readl_relaxed_poll_timeout(master->regs + SVC_I3C_MSTATUS, val,
+	ret = readl_relaxed_poll_timeout_atomic(master->regs + SVC_I3C_MSTATUS, val,
 					 SVC_I3C_MSTATUS_IBIWON(val), 0, 1000);
 	if (ret) {
 		dev_err(master->dev, "Timeout when polling for IBIWON\n");
@@ -529,7 +538,6 @@ static void svc_i3c_master_ibi_work(struct work_struct *work)
 
 reenable_ibis:
 	svc_i3c_master_enable_interrupts(master, SVC_I3C_MINT_SLVSTART);
-	mutex_unlock(&master->lock);
 }
 
 static irqreturn_t svc_i3c_master_irq_handler(int irq, void *dev_id)

-- 
2.34.1