[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241001073704.1389952-3-o.rempel@pengutronix.de>
Date: Tue, 1 Oct 2024 09:37:04 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Florian Fainelli <f.fainelli@...il.com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
Russell King <rmk+kernel@...linux.org.uk>,
kernel@...gutronix.de,
linux-kernel@...r.kernel.org,
netdev@...r.kernel.org,
Russell King <linux@...linux.org.uk>,
devicetree@...r.kernel.org
Subject: [PATCH net-next v4 2/2] net: phy: Add support for PHY timing-role configuration via device tree
Introduce support for configuring the master/slave role of PHYs based on
the `timing-role` property in the device tree. While this functionality
is necessary for Single Pair Ethernet (SPE) PHYs (1000/100/10Base-T1)
where hardware strap pins may be unavailable or incorrectly set, it
works for any PHY type.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
changes v4:
- add "Reviewed-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>"
changes v3:
- rename master-slave to timing-role
---
drivers/net/phy/phy-core.c | 33 +++++++++++++++++++++++++++++++++
drivers/net/phy/phy_device.c | 3 +++
include/linux/phy.h | 1 +
3 files changed, 37 insertions(+)
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 1f98b6a96c153..97ff10e226180 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -412,6 +412,39 @@ void of_set_phy_eee_broken(struct phy_device *phydev)
phydev->eee_broken_modes = broken;
}
+/**
+ * of_set_phy_timing_role - Set the master/slave mode of the PHY
+ *
+ * @phydev: The phy_device struct
+ *
+ * Set master/slave configuration of the PHY based on the device tree.
+ */
+void of_set_phy_timing_role(struct phy_device *phydev)
+{
+ struct device_node *node = phydev->mdio.dev.of_node;
+ const char *master;
+
+ if (!IS_ENABLED(CONFIG_OF_MDIO))
+ return;
+
+ if (!node)
+ return;
+
+ if (of_property_read_string(node, "timing-role", &master))
+ return;
+
+ if (strcmp(master, "force-master") == 0)
+ phydev->master_slave_set = MASTER_SLAVE_CFG_MASTER_FORCE;
+ else if (strcmp(master, "force-slave") == 0)
+ phydev->master_slave_set = MASTER_SLAVE_CFG_SLAVE_FORCE;
+ else if (strcmp(master, "prefer-master") == 0)
+ phydev->master_slave_set = MASTER_SLAVE_CFG_MASTER_PREFERRED;
+ else if (strcmp(master, "prefer-slave") == 0)
+ phydev->master_slave_set = MASTER_SLAVE_CFG_SLAVE_PREFERRED;
+ else
+ phydev_warn(phydev, "Unknown master-slave mode %s\n", master);
+}
+
/**
* phy_resolve_aneg_pause - Determine pause autoneg results
*
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 560e338b307a4..4ccf504a8b2c2 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3608,6 +3608,9 @@ static int phy_probe(struct device *dev)
*/
of_set_phy_eee_broken(phydev);
+ /* Get master/slave strap overrides */
+ of_set_phy_timing_role(phydev);
+
/* The Pause Frame bits indicate that the PHY can support passing
* pause frames. During autonegotiation, the PHYs will determine if
* they should allow pause frames to pass. The MAC driver should then
diff --git a/include/linux/phy.h b/include/linux/phy.h
index a98bc91a0cde9..ff762a3d8270a 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1260,6 +1260,7 @@ size_t phy_speeds(unsigned int *speeds, size_t size,
unsigned long *mask);
void of_set_phy_supported(struct phy_device *phydev);
void of_set_phy_eee_broken(struct phy_device *phydev);
+void of_set_phy_timing_role(struct phy_device *phydev);
int phy_speed_down_core(struct phy_device *phydev);
/**
--
2.39.5
Powered by blists - more mailing lists