Message-ID: <urf6tm7iosewgb42cd6q3ssx2hjaysuzhk2weu4xmoq5xsm7ir@hvwb7qgxko2h>
Date: Tue, 1 Oct 2024 10:35:17 +0200
From: Angelo Dureghello <adureghello@...libre.com>
To: Nuno Sá <noname.nuno@...il.com>
Cc: David Lechner <dlechner@...libre.com>, 
	Jonathan Cameron <jic23@...nel.org>, Lars-Peter Clausen <lars@...afoo.de>, 
	Michael Hennerich <Michael.Hennerich@...log.com>, Nuno Sa <nuno.sa@...log.com>, Rob Herring <robh@...nel.org>, 
	Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, 
	Olivier Moysan <olivier.moysan@...s.st.com>, linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org, 
	devicetree@...r.kernel.org
Subject: Re: [PATCH v3 05/10] iio: backend: extend features

On 01.10.2024 10:14, Nuno Sá wrote:
> On Mon, 2024-09-30 at 14:25 -0500, David Lechner wrote:
> > On 9/29/24 6:05 AM, Jonathan Cameron wrote:
> > > On Thu, 19 Sep 2024 11:20:01 +0200
> > > Angelo Dureghello <adureghello@...libre.com> wrote:
> > > 
> > > > From: Angelo Dureghello <adureghello@...libre.com>
> > > > 
> > > > Extend backend features with new calls needed later on this
> > > > patchset from axi version of ad3552r.
> > > > 
> > > > The follwoing calls are added:
> > > > 
> > > > iio_backend_ext_sync_enable
> > > > 	enable synchronize channels on external trigger
> > > > iio_backend_ext_sync_disable
> > > > 	disable synchronize channels on external trigger
> > > > iio_backend_ddr_enable
> > > > 	enable ddr bus transfer
> > > > iio_backend_ddr_disable
> > > > 	disable ddr bus transfer
> > > > iio_backend_set_bus_mode
> > > > 	select the type of bus, so that specific read / write
> > > > 	operations are performed accordingly
> > > > iio_backend_buffer_enable
> > > > 	enable buffer
> > > > iio_backend_buffer_disable
> > > > 	disable buffer
> > > > iio_backend_data_transfer_addr
> > > > 	define the target register address where the DAC sample
> > > > 	will be written.
> > > > 
> > > > Signed-off-by: Angelo Dureghello <adureghello@...libre.com>
> > > Hi Angelo,
> > > A few trivial comments inline.
> > > 
> > > > ---
> > > >  drivers/iio/industrialio-backend.c | 111
> > > > +++++++++++++++++++++++++++++++++++++
> > > >  include/linux/iio/backend.h        |  23 ++++++++
> > > >  2 files changed, 134 insertions(+)
> > > > 
> > > > diff --git a/drivers/iio/industrialio-backend.c
> > > > b/drivers/iio/industrialio-backend.c
> > > > index 20b3b5212da7..f4802c422dbf 100644
> > > > --- a/drivers/iio/industrialio-backend.c
> > > > +++ b/drivers/iio/industrialio-backend.c
> > > > @@ -718,6 +718,117 @@ static int __devm_iio_backend_get(struct device
> > > > *dev, struct iio_backend *back)
> > > ...
> > > 
> > > > +/**
> > > > + * iio_backend_ddr_disable - Disable interface DDR (Double Data Rate)
> > > > mode
> > > > + * @back: Backend device
> > > > + *
> > > > + * Disabling DDR data is generated byt the IP at rising or falling front
> > > 
> > > Spell check your comments.
> > > 
> > > > + * of the interface clock signal (SDR, Single Data Rate).
> > > > + *
> > > > + * RETURNS:
> > > > + * 0 on success, negative error number on failure.
> > > > + */
> > > > +int iio_backend_ddr_disable(struct iio_backend *back)
> > > > +{
> > > > +	return iio_backend_op_call(back, ddr_disable);
> > > > +}
> > > > +EXPORT_SYMBOL_NS_GPL(iio_backend_ddr_disable, IIO_BACKEND);
> > > 				 struct fwnode_handle *fwnode)
> > > >  {
> > > > diff --git a/include/linux/iio/backend.h b/include/linux/iio/backend.h
> > > > index 37d56914d485..41619b803cd6 100644
> > > > --- a/include/linux/iio/backend.h
> > > > +++ b/include/linux/iio/backend.h
> > > > @@ -14,12 +14,14 @@ struct iio_dev;
> > > >  enum iio_backend_data_type {
> > > >  	IIO_BACKEND_TWOS_COMPLEMENT,
> > > >  	IIO_BACKEND_OFFSET_BINARY,
> > > > +	IIO_BACKEND_DATA_UNSIGNED,
> > > >  	IIO_BACKEND_DATA_TYPE_MAX
> > > >  };
> > > >  
> > > >  enum iio_backend_data_source {
> > > >  	IIO_BACKEND_INTERNAL_CONTINUOUS_WAVE,
> > > >  	IIO_BACKEND_EXTERNAL,
> > > > +	IIO_BACKEND_INTERNAL_RAMP_16BIT,
> > > >  	IIO_BACKEND_DATA_SOURCE_MAX
> > > >  };
> > > >  
> > > > @@ -89,6 +91,13 @@ enum iio_backend_sample_trigger {
> > > >   * @read_raw: Read a channel attribute from a backend device
> > > >   * @debugfs_print_chan_status: Print channel status into a buffer.
> > > >   * @debugfs_reg_access: Read or write register value of backend.
> > > > + * @ext_sync_enable: Enable external synchronization.
> > > > + * @ext_sync_disable: Disable external synchronization.
> > > > + * @ddr_enable: Enable interface DDR (Double Data Rate) mode.
> > > > + * @ddr_disable: Disable interface DDR (Double Data Rate) mode.
> > > > + * @buffer_enable: Enable data buffer.
> > > > + * @buffer_disable: Disable data buffer.
> > > 
> > > This needs more specific text. What buffer?  I think this came
> > > up earlier but it needs to say something about the fact it's enabling
> > > or disabling the actual capture of data into the DMA buffers that
> > > userspace will read.
> > > 
> > > > + * @data_transfer_addr: Set data address.
> > > >   **/
> > > >  struct iio_backend_ops {
> > > >  	int (*enable)(struct iio_backend *back);
> > > > @@ -129,6 +138,13 @@ struct iio_backend_ops {
> > > >  					 size_t len);
> > > >  	int (*debugfs_reg_access)(struct iio_backend *back, unsigned int
> > > > reg,
> > > >  				  unsigned int writeval, unsigned int
> > > > *readval);
> > > > +	int (*ext_sync_enable)(struct iio_backend *back);
> > > I know we've done it this way for existing items, but I wonder if we should
> > > squish down the ops slightly and have new enable/disable pairs as
> > > single functions.
> > > 	int (*ext_sync_set_state)(struct iio_backend *back, bool enable);
> > > etc.  If nothing else reduces how many things need documentation ;)
> > > 
> > > Nuno, what do you think? Worth squashing these pairs into single
> > > callbacks?
> > 
> > I'm not a fan of combining enable and disable functions into one function.
> > 
> > The implementation will pretty much always be:
> > 
> > if (enabled) {
> >         /* so stuff */
> > } else {
> >         /* do other stuff */
> > }
> > 
> > Which just adds indent and makes code harder to read.
> > 
> 
> Hi Jonathan and David,
> 
> Yeah, I have this on my todo list and to be fair with Angelo, he already had
> something like you're suggesting. I kind of asked him to postpone that so we
> don't have mixed styles in the file for now. Then I would convert them all. My
> plan would be to squash the .ops into one and then have inline
> enable()/disable() helpers (at least for the current users in order to keep
> things easier to convert).
> 
> As for David's comment, I see your point but one can always improve things a bit
> 
> if (enable) {
> 	/* do stuff */
> 	return;
> }
> 
> /* do disable stuff */
> return 0
> 
> I'm aware the above is always not that straight... but I do think there's always
> ways to rearrange things a bit to make it better. Because even with the
> enable()/disable() approach, if you start to have a lot of common code, likely
> you'll add an helper function. In some cases, one can even add the helper right
> away with an 'enable' argument effectively doing what is being suggested in
> here. It always depends on the person implementing the ops :)
> 
> Anyways, I really don't have a strong feeling about this. I had in my mind to do
> something like this. It feels that Jonathan would already be ok with it. If it's
> not that awful for David, I'll eventually send the patches (unless Angelo wants
> to take care if it in this series).
>

I agree a single function for enable/disable may be good, reducing the calls and
also the code size should benefit of some few bytes.

Honestly, i would not do this in this patchset since i am a bit in difficulties
to have this job accepted as is, and also cannot retest all of them properly
right now.
 
> - Nuno Sá
> > 

-- 
Regards,
  Angelo
       

Powered by blists - more mailing lists