linux-kernel - Re: [PATCH net-next] net: phy: microchip

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e585b195-3213-46d2-807c-5906d5332502@microchip.com>
Date: Tue, 1 Oct 2024 11:58:11 +0000
From: <Parthiban.Veerasooran@...rochip.com>
To: <Divya.Koppera@...rochip.com>
CC: <Arun.Ramadoss@...rochip.com>, <UNGLinuxDriver@...rochip.com>,
	<andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
	<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
	<pabeni@...hat.com>, <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net-next] net: phy: microchip_t1: Interrupt support for
 lan887x

Hi,

On 30/09/24 9:04 pm, Divya Koppera wrote:
> Add support for link up and link down interrupts in lan887x.
> 
> Signed-off-by: Divya Koppera <divya.koppera@...rochip.com>
> ---
>   drivers/net/phy/microchip_t1.c | 63 ++++++++++++++++++++++++++++++++++
>   1 file changed, 63 insertions(+)
> 
> diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
> index a5ef8fe50704..383050a5b0ed 100644
> --- a/drivers/net/phy/microchip_t1.c
> +++ b/drivers/net/phy/microchip_t1.c
> @@ -226,6 +226,18 @@
>   #define MICROCHIP_CABLE_MAX_TIME_DIFF	\
>   	(MICROCHIP_CABLE_MIN_TIME_DIFF + MICROCHIP_CABLE_TIME_MARGIN)
>   
> +#define LAN887X_INT_STS				0xf000
> +#define LAN887X_INT_MSK				0xf001
> +#define LAN887X_INT_MSK_T1_PHY_INT_MSK		BIT(2)
> +#define LAN887X_INT_MSK_LINK_UP_MSK		BIT(1)
> +#define LAN887X_INT_MSK_LINK_DOWN_MSK		BIT(0)
> +
> +#define LAN887X_MX_CHIP_TOP_LINK_MSK	(LAN887X_INT_MSK_LINK_UP_MSK |\
> +					 LAN887X_INT_MSK_LINK_DOWN_MSK)
> +
> +#define LAN887X_MX_CHIP_TOP_ALL_MSK	(LAN887X_INT_MSK_T1_PHY_INT_MSK |\
> +					 LAN887X_MX_CHIP_TOP_LINK_MSK)
> +
>   #define DRIVER_AUTHOR	"Nisar Sayed <nisar.sayed@...rochip.com>"
>   #define DRIVER_DESC	"Microchip LAN87XX/LAN937x/LAN887x T1 PHY driver"
>   
> @@ -1474,6 +1486,7 @@ static void lan887x_get_strings(struct phy_device *phydev, u8 *data)
>   		ethtool_puts(&data, lan887x_hw_stats[i].string);
>   }
>   
> +static int lan887x_config_intr(struct phy_device *phydev);
>   static int lan887x_cd_reset(struct phy_device *phydev,
>   			    enum cable_diag_state cd_done)
>   {
> @@ -1504,6 +1517,10 @@ static int lan887x_cd_reset(struct phy_device *phydev,
>   		if (rc < 0)
>   			return rc;
>   
> +		rc = lan887x_config_intr(phydev);
> +		if (rc < 0)
> +			return rc;
> +
>   		rc = lan887x_phy_reconfig(phydev);
>   		if (rc < 0)
>   			return rc;
> @@ -1830,6 +1847,50 @@ static int lan887x_cable_test_get_status(struct phy_device *phydev,
>   	return lan887x_cable_test_report(phydev);
>   }
>   
> +static int lan887x_config_intr(struct phy_device *phydev)
> +{
> +	int ret;
> +
> +	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
> +		/* Clear the interrupt status before enabling interrupts */
> +		ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_INT_STS);
> +		if (ret < 0)
> +			return ret;
> +
> +		/* Unmask for enabling interrupt */
> +		ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, LAN887X_INT_MSK,
> +				    (u16)~LAN887X_MX_CHIP_TOP_ALL_MSK);
> +	} else {
> +		ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, LAN887X_INT_MSK,
> +				    GENMASK(15, 0));
> +		if (ret < 0)
> +			return ret;
> +
> +		ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_INT_STS);
> +	}
> +
> +	return ret < 0 ? ret : 0;
> +}
> +
> +static irqreturn_t lan887x_handle_interrupt(struct phy_device *phydev)
> +{
> +	int ret = IRQ_NONE;
I think you can remove 'ret' by simply returning IRQ_HANDLED and 
IRQ_NONE directly to save one line.

Best regards,
Parthiban V
> +	int irq_status;
> +
> +	irq_status = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_INT_STS);
> +	if (irq_status < 0) {
> +		phy_error(phydev);
> +		return IRQ_NONE;
> +	}
> +
> +	if (irq_status & LAN887X_MX_CHIP_TOP_LINK_MSK) {
> +		phy_trigger_machine(phydev);
> +		ret = IRQ_HANDLED;
> +	}
> +
> +	return ret;
> +}
> +
>   static struct phy_driver microchip_t1_phy_driver[] = {
>   	{
>   		PHY_ID_MATCH_MODEL(PHY_ID_LAN87XX),
> @@ -1881,6 +1942,8 @@ static struct phy_driver microchip_t1_phy_driver[] = {
>   		.read_status	= genphy_c45_read_status,
>   		.cable_test_start = lan887x_cable_test_start,
>   		.cable_test_get_status = lan887x_cable_test_get_status,
> +		.config_intr    = lan887x_config_intr,
> +		.handle_interrupt = lan887x_handle_interrupt,
>   	}
>   };
>