linux-kernel - [PATCH v1 11/11] riscv: dts: microchip: convert clock and reset to use syscon

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241002-porous-mangy-4634b6556202@spud>
Date: Wed,  2 Oct 2024 11:48:09 +0100
From: Conor Dooley <conor@...nel.org>
To: linux-kernel@...r.kernel.org
Cc: conor@...nel.org,
	Conor Dooley <conor.dooley@...rochip.com>,
	Daire McNamara <daire.mcnamara@...rochip.com>,
	pierre-henry.moussay@...rochip.com,
	valentina.fernandezalanis@...rochip.com,
	Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...nel.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Jassi Brar <jassisinghbrar@...il.com>,
	Lee Jones <lee@...nel.org>,
	Paul Walmsley <paul.walmsley@...ive.com>,
	Palmer Dabbelt <palmer@...belt.com>,
	Albert Ou <aou@...s.berkeley.edu>,
	Neil Armstrong <neil.armstrong@...aro.org>,
	Jerome Brunet <jbrunet@...libre.com>,
	Kevin Hilman <khilman@...libre.com>,
	Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
	Philipp Zabel <p.zabel@...gutronix.de>,
	linux-riscv@...ts.infradead.org,
	linux-clk@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-amlogic@...ts.infradead.org,
	linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v1 11/11] riscv: dts: microchip: convert clock and reset to use syscon

From: Conor Dooley <conor.dooley@...rochip.com>

The "subblock" clocks and reset registers on PolarFire SoC are located
in the mss-top-sysreg region, alongside pinctrl and interrupt control
functionality. Re-write the devicetree to describe the sys explicitly,
as its own node, rather than as a region of the clock node.
Correspondingly, the phandles to the reset controller must be updated to
the new provider. The drivers will continue to support the old way of
doing things.

Signed-off-by: Conor Dooley <conor.dooley@...rochip.com>
---
 arch/riscv/boot/dts/microchip/mpfs.dtsi | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index f8a45e4f00a0d..08aa4fe03fd30 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -251,11 +251,9 @@ pdma: dma-controller@...0000 {
 			#dma-cells = <1>;
 		};
 
-		clkcfg: clkcfg@...02000 {
-			compatible = "microchip,mpfs-clkcfg";
-			reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
-			clocks = <&refclk>;
-			#clock-cells = <1>;
+		mss_top_sysreg: syscon@...02000 {
+			compatible = "microchip,mpfs-mss-top-sysreg", "syscon", "simple-mfd";
+			reg = <0x0 0x20002000 0x0 0x1000>;
 			#reset-cells = <1>;
 		};
 
@@ -452,7 +450,7 @@ mac0: ethernet@...10000 {
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
 			clock-names = "pclk", "hclk";
-			resets = <&clkcfg CLK_MAC0>;
+			resets = <&mss_top_sysreg CLK_MAC0>;
 			status = "disabled";
 		};
 
@@ -466,7 +464,7 @@ mac1: ethernet@...12000 {
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
 			clock-names = "pclk", "hclk";
-			resets = <&clkcfg CLK_MAC1>;
+			resets = <&mss_top_sysreg CLK_MAC1>;
 			status = "disabled";
 		};
 
@@ -550,5 +548,12 @@ syscontroller_qspi: spi@...20100 {
 			clocks = <&scbclk>;
 			status = "disabled";
 		};
+
+		clkcfg: clkcfg@...01000 {
+			compatible = "microchip,mpfs-clkcfg";
+			reg = <0x0 0x3e001000 0x0 0x1000>;
+			clocks = <&refclk>;
+			#clock-cells = <1>;
+		};
 	};
 };
-- 
2.45.2