[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241002-mvebu-utmi-phy-v4-1-83783dc89b9d@solid-run.com>
Date: Wed, 02 Oct 2024 17:04:40 +0300
From: Josua Mayer <josua@...id-run.com>
To: Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>
Cc: linux-phy@...ts.infradead.org, linux-kernel@...r.kernel.org,
Josua Mayer <josua@...id-run.com>
Subject: [PATCH v4] phy: mvebu-cp110-utmi: support swapping d+/d- lanes by
dts property
CP11x UTMI PHY supports swapping D+/D- signals via digital control
register 1.
Add support for the "swap-dx-lanes" device-tree property, which lists
the port-ids that should swap D+ and D-.
The property is evaluated in probe and applied before power-on
during mvebu_cp110_utmi_port_setup.
Signed-off-by: Josua Mayer <josua@...id-run.com>
---
Changes in v4:
- rebased on v6.12-rc1
- Link to v3: https://lore.kernel.org/r/20240908-mvebu-utmi-phy-v3-1-88c50950e7d2@solid-run.com
Changes in v3:
- add description for new struct member
(Reported-by: kernel test robot <lkp@...el.com>)
- Link to v2: https://lore.kernel.org/r/20240903-mvebu-utmi-phy-v2-1-7f49c131fad0@solid-run.com
Changes in v2:
- fixed compile error introduced with v6.11-rc1:
parameters of of_property_for_each_u32 were changed from 5 to 3.
(Reported-by: Vinod Koul <vkoul@...nel.org>)
- rebased on v6.11-rc1
- Link to v1: https://lore.kernel.org/r/20240704-mvebu-utmi-phy-v1-1-9d3c8eea46e5@solid-run.com
---
drivers/phy/marvell/phy-mvebu-cp110-utmi.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-utmi.c b/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
index 4922a5f3327d..59903f86b13f 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
@@ -62,6 +62,8 @@
#define SQ_AMP_CAL_MASK GENMASK(2, 0)
#define SQ_AMP_CAL_VAL 1
#define SQ_AMP_CAL_EN BIT(3)
+#define UTMI_DIG_CTRL1_REG 0x20
+#define SWAP_DPDM BIT(15)
#define UTMI_CTRL_STATUS0_REG 0x24
#define SUSPENDM BIT(22)
#define TEST_SEL BIT(25)
@@ -99,11 +101,13 @@ struct mvebu_cp110_utmi {
* @priv: PHY driver data
* @id: PHY port ID
* @dr_mode: PHY connection: USB_DR_MODE_HOST or USB_DR_MODE_PERIPHERAL
+ * @swap_dx: whether to swap d+/d- signals
*/
struct mvebu_cp110_utmi_port {
struct mvebu_cp110_utmi *priv;
u32 id;
enum usb_dr_mode dr_mode;
+ bool swap_dx;
};
static void mvebu_cp110_utmi_port_setup(struct mvebu_cp110_utmi_port *port)
@@ -159,6 +163,13 @@ static void mvebu_cp110_utmi_port_setup(struct mvebu_cp110_utmi_port *port)
reg &= ~(VDAT_MASK | VSRC_MASK);
reg |= (VDAT_VAL << VDAT_OFFSET) | (VSRC_VAL << VSRC_OFFSET);
writel(reg, PORT_REGS(port) + UTMI_CHGDTC_CTRL_REG);
+
+ /* Swap D+/D- */
+ reg = readl(PORT_REGS(port) + UTMI_DIG_CTRL1_REG);
+ reg &= ~(SWAP_DPDM);
+ if (port->swap_dx)
+ reg |= SWAP_DPDM;
+ writel(reg, PORT_REGS(port) + UTMI_DIG_CTRL1_REG);
}
static int mvebu_cp110_utmi_phy_power_off(struct phy *phy)
@@ -286,6 +297,7 @@ static int mvebu_cp110_utmi_phy_probe(struct platform_device *pdev)
struct phy_provider *provider;
struct device_node *child;
u32 usb_devices = 0;
+ u32 swap_dx = 0;
utmi = devm_kzalloc(dev, sizeof(*utmi), GFP_KERNEL);
if (!utmi)
@@ -345,6 +357,10 @@ static int mvebu_cp110_utmi_phy_probe(struct platform_device *pdev)
}
}
+ of_property_for_each_u32(dev->of_node, "swap-dx-lanes", swap_dx)
+ if (swap_dx == port_id)
+ port->swap_dx = 1;
+
/* Retrieve PHY capabilities */
utmi->ops = &mvebu_cp110_utmi_phy_ops;
---
base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
change-id: 20240704-mvebu-utmi-phy-84aa3bf3957d
Best regards,
--
Josua Mayer <josua@...id-run.com>
Powered by blists - more mailing lists