[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241004-x1e80100-dts-fixes-pcie6a-v2-1-3af9ff7a5a71@linaro.org>
Date: Fri, 04 Oct 2024 12:06:33 +0300
From: Abel Vesa <abel.vesa@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Johan Hovold <johan@...nel.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Abel Vesa <abel.vesa@...aro.org>
Subject: [PATCH v2] arm64: dts: qcom: x1e80100: Switch PCIe 6a to 4 lanes
mode
The PCIe 6a controller and PHY can be configured in 4-lanes mode or
2-lanes mode. For 4-lanes mode, it fetches the lanes provided by PCIe 6b.
For 2-lanes mode, PCIe 6a uses 2 lanes and then PCIe 6b uses the other 2
lanes. Configure it in 4-lane mode and then each board can configure it
depending on the design. Both the QCP and CRD boards, currently upstream,
use PCIe 6a for NVMe in 4-lane mode. Mark the controller as 4-lane as
well. This is the last change needed in order to support NVMe with Gen4
4-lanes on all existing X Elite boards.
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
Changes in v2:
- Re-worded the commit message according to Johan's suggestions
- Dropped the clocks changes.
- Dropped the fixes tag as this relies on the Gen4 4-lanes stability
patchset which has been only merged in 6.12, so backporting this patch
would break NVMe support for all platforms.
- Link to v1: https://lore.kernel.org/r/20240531-x1e80100-dts-fixes-pcie6a-v1-2-1573ebcae1e8@linaro.org
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index a36076e3c56b5b8815eb41ec55e2e1e5bd878201..4ec712cb7a26d8fe434631cf15949524fd22c7d9 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -2931,7 +2931,7 @@ pcie6a: pci@...8000 {
dma-coherent;
linux,pci-domain = <6>;
- num-lanes = <2>;
+ num-lanes = <4>;
interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
@@ -2997,8 +2997,9 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
};
pcie6a_phy: phy@...c000 {
- compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy";
- reg = <0 0x01bfc000 0 0x2000>;
+ compatible = "qcom,x1e80100-qmp-gen4x4-pcie-phy";
+ reg = <0 0x01bfc000 0 0x2000>,
+ <0 0x01bfe000 0 0x2000>;
clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>,
<&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
@@ -3021,6 +3022,8 @@ pcie6a_phy: phy@...c000 {
power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>;
+ qcom,4ln-config-sel = <&tcsr 0x1a000 0>;
+
#clock-cells = <0>;
clock-output-names = "pcie6a_pipe_clk";
---
base-commit: c02d24a5af66a9806922391493205a344749f2c4
change-id: 20241003-x1e80100-dts-fixes-pcie6a-b9f1171e8d5b
Best regards,
--
Abel Vesa <abel.vesa@...aro.org>
Powered by blists - more mailing lists