| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241004-x1e80100-ps8830-v2-1-5cd8008c8c40@linaro.org>
Date: Fri, 04 Oct 2024 16:57:37 +0300
From: Abel Vesa <abel.vesa@...aro.org>
To: Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Rajendra Nayak <quic_rjendra@...cinc.com>,
Sibi Sankar <quic_sibis@...cinc.com>, Johan Hovold <johan@...nel.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Trilok Soni <quic_tsoni@...cinc.com>, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
Abel Vesa <abel.vesa@...aro.org>
Subject: [PATCH v2 1/2] dt-bindings: usb: Add Parade PS8830 Type-C retimer
bindings
Document bindings for the Parade PS8830 Type-C retimer. This retimer is
currently found on all boards featuring Qualcomm Snapdragon X Elite SoCs
and it is needed to provide altmode muxing between DP and USB, but also
connector orientation handling between.
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
.../devicetree/bindings/usb/parade,ps8830.yaml | 129 +++++++++++++++++++++
1 file changed, 129 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/parade,ps8830.yaml b/Documentation/devicetree/bindings/usb/parade,ps8830.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..f6721d6eee26c6d4590a12c19791b3d47a8145f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/parade,ps8830.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/parade,ps8830.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parade PS8830 USB and DisplayPort Retimer
+
+maintainers:
+ - Abel Vesa <abel.vesa@...aro.org>
+
+properties:
+ compatible:
+ enum:
+ - parade,ps8830
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: XO Clock
+
+ clock-names:
+ items:
+ - const: xo
+
+ reset-gpios:
+ maxItems: 1
+
+ vdd-supply:
+ description: power supply (1.07V)
+
+ vdd33-supply:
+ description: power supply (3.3V)
+
+ vdd33-cap-supply:
+ description: power supply (3.3V)
+
+ vddar-supply:
+ description: power supply (1.07V)
+
+ vddat-supply:
+ description: power supply (1.07V)
+
+ vddio-supply:
+ description: power supply (1.2V or 1.8V)
+
+ orientation-switch: true
+ retimer-switch: true
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Super Speed (SS) Output endpoint to the Type-C connector
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: Super Speed (SS) Input endpoint from the Super-Speed PHY
+ unevaluatedProperties: false
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of
+ handling altmode muxing and orientation switching.
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: usb-switch.yaml#
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x8>;
+
+ vdd-supply = <&vreg_rtmr_1p15>;
+ vdd33-supply = <&vreg_rtmr_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr_3p3>;
+ vddar-supply = <&vreg_rtmr_1p15>;
+ vddat-supply = <&vreg_rtmr_1p15>;
+ vddio-supply = <&vreg_rtmr_1p8>;
+
+ reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_HIGH>;
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_con_ss: endpoint {
+ remote-endpoint = <&typec_con_ss>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ phy_con_ss: endpoint {
+ remote-endpoint = <&usb_phy_ss>;
+ data-lanes = <3 2 1 0>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ usb_con_sbu: endpoint {
+ remote-endpoint = <&typec_dp_aux>;
+ };
+ };
+ };
+ };
+ };
+...
--
2.34.1
Powered by blists - more mailing lists