[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241004150148.14033-1-abhashkumarjha123@gmail.com>
Date: Fri, 4 Oct 2024 20:31:45 +0530
From: Abhash Jha <abhashkumarjha123@...il.com>
To: linux-iio@...r.kernel.org
Cc: jic23@...nel.org,
lars@...afoo.de,
linux-kernel@...r.kernel.org,
Abhash Jha <abhashkumarjha123@...il.com>
Subject: [PATCH 0/3] Interrupt and Continuous mode support for VL6180
Hello,
The first patch adds support for configuring the Sampling frequency
(inter-measurement period) of the sensor. The values must be provided
in miliseconds. The default value for the inter-measurement period for
ALS is 10ms and for Range is 50ms.
The second patch adds support for interrupt based single shot reading.
We registered an irq_handler that fires everytime the data is ready.
And then we read the appropriate value in the `vl6180_measure` routine.
The third patch adds support for continuous mode in the sensor by using
buffers. We enable the sensor's continuous mode in the buffer_postenable
function depending on the `active_scan_mask`.
The continuous mode can be disabled by disabling the buffer.
Added a trigger to the device for the continuous mode. Also validating that
the device uses the internal trigger provided by us.
Thanks,
Abhash Jha
Abhash Jha (3):
iio: light: vl6180: Add configurable inter-measurement period support
iio: light: vl6180: Added Interrupt support for single shot access
iio: light: vl6180: Add support for Continuous Mode
drivers/iio/light/vl6180.c | 267 ++++++++++++++++++++++++++++++++++---
1 file changed, 250 insertions(+), 17 deletions(-)
--
2.43.0
Powered by blists - more mailing lists