lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20241005180151.2f70cbef@jic23-huawei>
Date: Sat, 5 Oct 2024 18:01:51 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Abhash Jha <abhashkumarjha123@...il.com>
Cc: linux-iio@...r.kernel.org, lars@...afoo.de, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 0/3] Interrupt and Continuous mode support for VL6180

On Sat,  5 Oct 2024 21:22:22 +0530
Abhash Jha <abhashkumarjha123@...il.com> wrote:

> Hello,
> 
> The first patch adds support for configuring the Sampling frequency
> (inter-measurement period) of the sensor. The values must be provided
> in miliseconds. The default value for the inter-measurement period for
> ALS is 10ms and for Range is 50ms.
> 
> The second patch adds support for interrupt based single shot reading.
> We registered an irq_handler that fires everytime the data is ready.
> And then we read the appropriate value in the `vl6180_measure` routine.
> 
> The third patch adds support for continuous mode in the sensor by using
> buffers. We enable the sensor's continuous mode in the buffer_postenable
> function depending on the `active_scan_mask`.
> The continuous mode can be disabled by disabling the buffer.
> Added a trigger to the device for the continuous mode. Also validating that
> the device uses the internal trigger provided by us.
> 
> Changes in v2:
> - Fixed `label followed by a declaration is a C23 extension [-Wc23-extensions]`
>   by moving the guard(mutex)(&data->lock) above the switch statement.
> 
> - The above error was pointed out during testing by kernel-test-robot
> 
> Thanks,
> Abhash Jha
Hi Abhash,

I left comments on v1.  Even for a compile issue like this one, maybe just
a quick reply to the earlier posting saying what you will change is more
appropriate than sending a new version just one day after the first.

Not a bit thing, so just check those reviews on v1.

Thanks,

Jonathan

> 
> 
> Abhash Jha (3):
>   iio: light: vl6180: Add configurable inter-measurement period support
>   iio: light: vl6180: Added Interrupt support for single shot access
>   iio: light: vl6180: Add support for Continuous Mode
> 
>  drivers/iio/light/vl6180.c | 266 ++++++++++++++++++++++++++++++++++---
>  1 file changed, 249 insertions(+), 17 deletions(-)
> 


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ