lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d4i6yrwx4loeojylsiijnsdemgb4u6hn5ccd74yn3mhqytwlc4@6gdejdv6jiwv>
Date: Sun, 6 Oct 2024 22:48:06 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: srinivas.kandagatla@...aro.org
Cc: andersson@...nel.org, konradybcio@...nel.org, robh@...nel.org, 
	krzk+dt@...nel.org, conor+dt@...nel.org, linux-arm-msm@...r.kernel.org, 
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, johan+linaro@...nel.org, 
	abel.vesa@...aro.org
Subject: Re: [PATCH v3] arm64: dts: qcom: x1e80100-t14s: add another trackpad
 support

On Fri, Oct 04, 2024 at 02:08:49PM GMT, srinivas.kandagatla@...aro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> 
> Trackpad HID device on T14s could be found on two possible slave addresses
> (hid@15 and hid@2c) on i2c0 instance.
> With the current state of DT boot, there is no way to patch the device
> tree at runtime during boot. This, however results in non-functional
> trackpad on Product Models 21N2ZC5PUS which have trackpad on hid@2c
> slave address.
> 
> This patch adds hid@2c device along with hid@15 to get it working on
> both the variants. This should work as i2c-hid driver will stop
> probing the device if there is nothing on the slave address, we can
> actually keep both devices enabled in DT, and i2c-hid driver will
> only probe the existing one.
> 
> The only problem is that we cannot setup pinctrl in both device nodes,
> as two devices with the same pinctrl will cause pin conflict that makes
> the second device fail to probe.  Let's move the pinctrl state up to
> parent node along with the parent pinctrl to solve this problem.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> ---
> 
> Changes since v2:
> - updated commit log
> - added missing parent pinctrl
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>

-- 
With best wishes
Dmitry

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ