| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <c702bb7781483f75010afa527cbb12a2e444b204.camel@apitzsch.eu>
Date: Sun, 06 Oct 2024 23:28:26 +0200
From: André <git@...tzsch.eu>
To: Ricardo Ribalda Delgado <ribalda@...nel.org>
Cc: Sakari Ailus <sakari.ailus@...ux.intel.com>, Mauro Carvalho Chehab
<mchehab@...nel.org>, ~postmarketos/upstreaming@...ts.sr.ht,
phone-devel@...r.kernel.org, linux-media@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 09/13] media: i2c: imx214: Extract format and crop
settings
Hi Ricardo,
Am Donnerstag, dem 12.09.2024 um 15:40 +0200 schrieb Ricardo Ribalda
Delgado:
> On Mon, Sep 2, 2024 at 11:54 PM André Apitzsch via B4 Relay
> <devnull+git.apitzsch.eu@...nel.org> wrote:
> >
> > From: André Apitzsch <git@...tzsch.eu>
> >
> > Remove format and crop settings from register sequences and set
> > them
> > programmatically.
> >
> > Signed-off-by: André Apitzsch <git@...tzsch.eu>
> > ---
> > drivers/media/i2c/imx214.c | 137
> > ++++++++++++++++++++++++++++++++++-----------
> > 1 file changed, 105 insertions(+), 32 deletions(-)
> >
> > diff --git a/drivers/media/i2c/imx214.c
> > b/drivers/media/i2c/imx214.c
> > index 9f5a57aebb86..733f55257585 100644
> > --- a/drivers/media/i2c/imx214.c
> > +++ b/drivers/media/i2c/imx214.c
> > @@ -132,6 +132,9 @@
> > #define IMX214_BINNING_NONE 0
> > #define IMX214_BINNING_ENABLE 1
> > #define IMX214_REG_BINNING_TYPE CCI_REG8(0x0901)
> > +#define IMX214_BINNING_1X1 0
> > +#define IMX214_BINNING_2X2 0x22
> > +#define IMX214_BINNING_4X4 0x44
> > #define IMX214_REG_BINNING_WEIGHTING CCI_REG8(0x0902)
> > #define IMX214_BINNING_AVERAGE 0x00
> > #define IMX214_BINNING_SUMMED 0x01
> > @@ -214,36 +217,22 @@ static const struct cci_reg_sequence
> > mode_4096x2304[] = {
> > { IMX214_REG_HDR_MODE, IMX214_HDR_MODE_OFF },
> > { IMX214_REG_HDR_RES_REDUCTION, IMX214_HDR_RES_REDU_THROUGH
> > },
> > { IMX214_REG_EXPOSURE_RATIO, 1 },
> > - { IMX214_REG_X_ADD_STA, 56 },
> > - { IMX214_REG_Y_ADD_STA, 408 },
> > - { IMX214_REG_X_ADD_END, 4151 },
> > - { IMX214_REG_Y_ADD_END, 2711 },
> > { IMX214_REG_X_EVEN_INC, 1 },
> > { IMX214_REG_X_ODD_INC, 1 },
> > { IMX214_REG_Y_EVEN_INC, 1 },
> > { IMX214_REG_Y_ODD_INC, 1 },
> > - { IMX214_REG_BINNING_MODE, IMX214_BINNING_NONE },
> > - { IMX214_REG_BINNING_TYPE, 0 },
> > { IMX214_REG_BINNING_WEIGHTING, IMX214_BINNING_AVERAGE },
> > { CCI_REG8(0x3000), 0x35 },
> > { CCI_REG8(0x3054), 0x01 },
> > { CCI_REG8(0x305C), 0x11 },
> >
> > - { IMX214_REG_CSI_DATA_FORMAT, IMX214_CSI_DATA_FORMAT_RAW10
> > },
> > - { IMX214_REG_X_OUTPUT_SIZE, 4096 },
> > - { IMX214_REG_Y_OUTPUT_SIZE, 2304 },
> > { IMX214_REG_SCALE_MODE, IMX214_SCALE_NONE },
> > { IMX214_REG_SCALE_M, 2 },
> > - { IMX214_REG_DIG_CROP_X_OFFSET, 0 },
> > - { IMX214_REG_DIG_CROP_Y_OFFSET, 0 },
> > - { IMX214_REG_DIG_CROP_WIDTH, 4096 },
> > - { IMX214_REG_DIG_CROP_HEIGHT, 2304 },
> >
> > { IMX214_REG_VTPXCK_DIV, 5 },
> > { IMX214_REG_VTSYCK_DIV, 2 },
> > { IMX214_REG_PREPLLCK_VT_DIV, 3 },
> > { IMX214_REG_PLL_VT_MPY, 150 },
> > - { IMX214_REG_OPPXCK_DIV, 10 },
> > { IMX214_REG_OPSYCK_DIV, 1 },
> > { IMX214_REG_PLL_MULT_DRIV, IMX214_PLL_SINGLE },
> >
> > @@ -284,36 +273,22 @@ static const struct cci_reg_sequence
> > mode_1920x1080[] = {
> > { IMX214_REG_HDR_MODE, IMX214_HDR_MODE_OFF },
> > { IMX214_REG_HDR_RES_REDUCTION, IMX214_HDR_RES_REDU_THROUGH
> > },
> > { IMX214_REG_EXPOSURE_RATIO, 1 },
> > - { IMX214_REG_X_ADD_STA, 1144 },
> > - { IMX214_REG_Y_ADD_STA, 1020 },
> > - { IMX214_REG_X_ADD_END, 3063 },
> > - { IMX214_REG_Y_ADD_END, 2099 },
> > { IMX214_REG_X_EVEN_INC, 1 },
> > { IMX214_REG_X_ODD_INC, 1 },
> > { IMX214_REG_Y_EVEN_INC, 1 },
> > { IMX214_REG_Y_ODD_INC, 1 },
> > - { IMX214_REG_BINNING_MODE, IMX214_BINNING_NONE },
> > - { IMX214_REG_BINNING_TYPE, 0 },
> > { IMX214_REG_BINNING_WEIGHTING, IMX214_BINNING_AVERAGE },
> > { CCI_REG8(0x3000), 0x35 },
> > { CCI_REG8(0x3054), 0x01 },
> > { CCI_REG8(0x305C), 0x11 },
> >
> > - { IMX214_REG_CSI_DATA_FORMAT, IMX214_CSI_DATA_FORMAT_RAW10
> > },
> > - { IMX214_REG_X_OUTPUT_SIZE, 1920 },
> > - { IMX214_REG_Y_OUTPUT_SIZE, 1080 },
> > { IMX214_REG_SCALE_MODE, IMX214_SCALE_NONE },
> > { IMX214_REG_SCALE_M, 2 },
> > - { IMX214_REG_DIG_CROP_X_OFFSET, 0 },
> > - { IMX214_REG_DIG_CROP_Y_OFFSET, 0 },
> > - { IMX214_REG_DIG_CROP_WIDTH, 1920 },
> > - { IMX214_REG_DIG_CROP_HEIGHT, 1080 },
> >
> > { IMX214_REG_VTPXCK_DIV, 5 },
> > { IMX214_REG_VTSYCK_DIV, 2 },
> > { IMX214_REG_PREPLLCK_VT_DIV, 3 },
> > { IMX214_REG_PLL_VT_MPY, 150 },
> > - { IMX214_REG_OPPXCK_DIV, 10 },
> > { IMX214_REG_OPSYCK_DIV, 1 },
> > { IMX214_REG_PLL_MULT_DRIV, IMX214_PLL_SINGLE },
> >
> > @@ -626,6 +601,7 @@ static int imx214_set_format(struct v4l2_subdev
> > *sd,
> > struct v4l2_mbus_framefmt *__format;
> > struct v4l2_rect *__crop;
> > const struct imx214_mode *mode;
> > + unsigned int bin_h, bin_v, bin;
> >
> > mode = v4l2_find_nearest_size(imx214_modes,
> > ARRAY_SIZE(imx214_modes),
> > width, height,
> > @@ -637,9 +613,32 @@ static int imx214_set_format(struct
> > v4l2_subdev *sd,
> > __format = v4l2_subdev_state_get_format(sd_state, 0);
> > *__format = format->format;
> >
> > + /*
> > + * Use binning to maximize the crop rectangle size, and
> > centre it in the
> > + * sensor.
> > + */
>
> We only support two modes. Wouldn't it be easier to add a new
> "binning" field to imx124_mode?
>
I prefer this more general approach. It's similar to what is done for
imx219. And we might add more modes later.
But I'm also fine with using the "binning" field if you are in favor of
it.
> > + bin_h = IMX214_PIXEL_ARRAY_WIDTH / __format->width;
> > + bin_v = IMX214_PIXEL_ARRAY_HEIGHT / __format->height;
> > +
> > + switch (min(bin_h, bin_v)) {
> > + case 1:
> > + bin = 1;
> > + break;
> > + case 2:
> > + case 3:
> > + bin = 2;
> > + break;
> > + case 4:
> > + default:
> > + bin = 4;
> > + break;
> > + }
> > +
> > __crop = v4l2_subdev_state_get_crop(sd_state, 0);
> > - __crop->width = mode->width;
> > - __crop->height = mode->height;
> > + __crop->width = __format->width * bin;
> > + __crop->height = __format->height * bin;
> > + __crop->left = (IMX214_NATIVE_WIDTH - __crop->width) / 2;
> > + __crop->top = (IMX214_NATIVE_HEIGHT - __crop->height) / 2;
> >
> > if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > int exposure_max;
> > @@ -845,6 +844,71 @@ static int imx214_ctrls_init(struct imx214
> > *imx214)
> > return 0;
> > };
> >
> > +static int imx214_set_framefmt(struct imx214 *imx214,
> > + struct v4l2_subdev_state *state)
> > +{
> > + const struct v4l2_mbus_framefmt *format;
> > + const struct v4l2_rect *crop;
> > + unsigned int bpp;
> > + u64 bin_mode;
> > + u64 bin_type;
> > + int ret = 0;
> > +
> > + format = v4l2_subdev_state_get_format(state, 0);
> > + crop = v4l2_subdev_state_get_crop(state, 0);
> > +
>
> This code does not do anything, bpp is always 10.
> We can remove the switch and setting IMX214_REG_CSI_DATA_FORMAT
> IMX214_REG_OPPXCK_DIV programmatically
I'll simplify this.
Best regards,
André
>
>
> > + switch (format->code) {
> > + case MEDIA_BUS_FMT_SRGGB10_1X10:
> > + case MEDIA_BUS_FMT_SGRBG10_1X10:
> > + case MEDIA_BUS_FMT_SGBRG10_1X10:
> > + case MEDIA_BUS_FMT_SBGGR10_1X10:
> > + default:
> > + bpp = 10;
> > + break;
> > + }
>
>
>
> > +
> > + cci_write(imx214->regmap, IMX214_REG_X_ADD_STA,
> > + crop->left - IMX214_PIXEL_ARRAY_LEFT, &ret);
> > + cci_write(imx214->regmap, IMX214_REG_X_ADD_END,
> > + crop->left - IMX214_PIXEL_ARRAY_LEFT + crop-
> > >width - 1, &ret);
> > + cci_write(imx214->regmap, IMX214_REG_Y_ADD_STA,
> > + crop->top - IMX214_PIXEL_ARRAY_TOP, &ret);
> > + cci_write(imx214->regmap, IMX214_REG_Y_ADD_END,
> > + crop->top - IMX214_PIXEL_ARRAY_TOP + crop->height
> > - 1, &ret);
> > +
> > + /* Proper setting is required even if cropping is not used
> > */
> > + cci_write(imx214->regmap, IMX214_REG_DIG_CROP_WIDTH, crop-
> > >width, &ret);
> > + cci_write(imx214->regmap, IMX214_REG_DIG_CROP_HEIGHT, crop-
> > >height, &ret);
> > +
> > + switch (crop->width / format->width) {
> > + case 1:
> > + default:
> > + bin_mode = IMX214_BINNING_NONE;
> > + bin_type = IMX214_BINNING_1X1;
> > + break;
> > + case 2:
> > + bin_mode = IMX214_BINNING_ENABLE;
> > + bin_type = IMX214_BINNING_2X2;
> > + break;
> > + case 4:
> > + bin_mode = IMX214_BINNING_ENABLE;
> > + bin_type = IMX214_BINNING_4X4;
> > + break;
> > + }
> > +
> > + cci_write(imx214->regmap, IMX214_REG_BINNING_MODE,
> > bin_mode, &ret);
> > + cci_write(imx214->regmap, IMX214_REG_BINNING_TYPE,
> > bin_type, &ret);
> > +
> > + cci_write(imx214->regmap, IMX214_REG_X_OUTPUT_SIZE, format-
> > >width, &ret);
> > + cci_write(imx214->regmap, IMX214_REG_Y_OUTPUT_SIZE, format-
> > >height, &ret);
> > +
> > + cci_write(imx214->regmap, IMX214_REG_CSI_DATA_FORMAT,
> > + (bpp << 8) | bpp, &ret);
> > + cci_write(imx214->regmap, IMX214_REG_OPPXCK_DIV, bpp,
> > &ret);
> > +
> > + return ret;
> > +};
> > +
> > static int imx214_configure_lanes(struct imx214 *imx214)
> > {
> > return cci_write(imx214->regmap, IMX214_REG_CSI_LANE_MODE,
> > @@ -852,7 +916,8 @@ static int imx214_configure_lanes(struct imx214
> > *imx214)
> > IMX214_CSI_4_LANE_MODE, NULL);
> > };
> >
> > -static int imx214_start_streaming(struct imx214 *imx214)
> > +static int imx214_start_streaming(struct imx214 *imx214,
> > + struct v4l2_subdev_state *state)
> > {
> > const struct imx214_mode *mode;
> > int ret;
> > @@ -871,6 +936,14 @@ static int imx214_start_streaming(struct
> > imx214 *imx214)
> > return ret;
> > }
> >
> > + /* Apply format and crop settings */
> > + ret = imx214_set_framefmt(imx214, state);
> > + if (ret) {
> > + dev_err(imx214->dev, "%s failed to set frame
> > format: %d\n",
> > + __func__, ret);
> > + return ret;
> > + }
> > +
> > mode = v4l2_find_nearest_size(imx214_modes,
> > ARRAY_SIZE(imx214_modes), width,
> > height,
> > imx214->fmt.width, imx214-
> > >fmt.height);
> > @@ -922,7 +995,7 @@ static int imx214_s_stream(struct v4l2_subdev
> > *subdev, int enable)
> > return ret;
> >
> > state =
> > v4l2_subdev_lock_and_get_active_state(subdev);
> > - ret = imx214_start_streaming(imx214);
> > + ret = imx214_start_streaming(imx214, state);
> > v4l2_subdev_unlock_state(state);
> > if (ret < 0)
> > goto err_rpm_put;
> >
> > --
> > 2.46.0
> >
> >
> >
Powered by blists - more mailing lists