[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZwQEtXp5Hr0UL_mh@gaggiata.pivistrello.it>
Date: Mon, 7 Oct 2024 17:56:37 +0200
From: Francesco Dolcini <francesco@...cini.it>
To: Rob Herring <robh@...nel.org>
Cc: Francesco Dolcini <francesco@...cini.it>, linux-kernel@...r.kernel.org,
Parth Pancholi <parth.pancholi@...adex.com>,
Mathias Nyman <mathias.nyman@...el.com>,
Francesco Dolcini <francesco.dolcini@...adex.com>,
devicetree@...r.kernel.org,
Krzysztof Kozlowski <krzk+dt@...nel.org>, linux-usb@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Conor Dooley <conor+dt@...nel.org>
Subject: Re: [PATCH v2 1/2] dt-bindings: usb: add TUSB73x0 PCIe
On Mon, Oct 07, 2024 at 10:44:46AM -0500, Rob Herring wrote:
> On Mon, Oct 07, 2024 at 04:29:20PM +0200, Francesco Dolcini wrote:
> > On Mon, Oct 07, 2024 at 09:16:48AM -0500, Rob Herring (Arm) wrote:
> > > On Mon, 07 Oct 2024 11:32:04 +0200, Francesco Dolcini wrote:
> > > > From: Parth Pancholi <parth.pancholi@...adex.com>
> > > >
> > > > Add device tree bindings for TI's TUSB73x0 PCIe-to-USB 3.0 xHCI
> > > > host controller. The controller supports software configuration
> > > > through PCIe registers, such as controlling the PWRONx polarity
> > > > via the USB control register (E0h).
> > > >
> > > > Similar generic PCIe-based bindings can be found as qcom,ath11k-pci.yaml
> > > > as an example.
> > > >
> > > > Datasheet: https://www.ti.com/lit/ds/symlink/tusb7320.pdf
> > > > Signed-off-by: Parth Pancholi <parth.pancholi@...adex.com>
> > > > Signed-off-by: Francesco Dolcini <francesco.dolcini@...adex.com>
> > > > ---
> > > > v2: rename property to ti,tusb7320-pwron-active-high and change type to flag
> > > > ---
> > > > .../bindings/usb/ti,tusb73x0-pci.yaml | 60 +++++++++++++++++++
> > > > 1 file changed, 60 insertions(+)
> > > > create mode 100644 Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml
> > > >
> > >
> > > My bot found errors running 'make dt_binding_check' on your patch:
> > >
> > > yamllint warnings/errors:
> > >
> > > dtschema/dtc warnings/errors:
> > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.example.dtb: pcie@0: usb@0:compatible: ['pci104C,8241'] does not contain items matching the given schema
> > > from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml#
> > >
> > > doc reference errors (make refcheckdocs):
> > >
> > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241007093205.27130-2-francesco@dolcini.it
> > >
> > > The base for the series is generally the latest rc1. A different dependency
> > > should be noted in *this* patch.
> > >
> > > If you already ran 'make dt_binding_check' and didn't see the above
> > > error(s), then make sure 'yamllint' is installed and dt-schema is up to
> > > date:
> > >
> > > pip3 install dtschema --upgrade
> >
> > I do not have this error locally, and I am not sure I see the issue in
> > the yaml file ...
> >
> > $ make dt_binding_check W=1 DT_SCHEMA_FILES=ti,tusb73x0-pci.yaml
>
> DT_SCHEMA_FILES limits what is tested.
>
> The issue is your compatible string should be lowercase hex.
Whoops, thanks for helping out.
I'll wait for more feedback (on this, and on patch 2/2) before sending a v3,
let me know if there is anything else that would need to be adjusted.
Francesco
Powered by blists - more mailing lists