[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2lumlvmn6244rn7imm2zeluglknnpaufjb3oqz7n672bmsivst@rn7nlv3do65z>
Date: Mon, 7 Oct 2024 20:28:15 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Karl Chan <exxxxkc@...googleoff.me>
Cc: linux-arm-msm@...r.kernel.org, andersson@...nel.org,
konradybcio@...nel.org, robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
mturquette@...libre.com, sboyd@...nel.org, linus.walleij@...aro.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-gpio@...r.kernel.org
Subject: Re: [PATCH v6 2/5] arm64: dts: qcom: add Linksys EA9350 V3
On Tue, Oct 08, 2024 at 12:34:11AM GMT, Karl Chan wrote:
> Add device tree source for Linksys EA9350 V3
> which is a WiFi router based on the IPQ5018 SoC.
> As of now , only the UART,USB,USB LED,buttons is working.
> The front PWM LED require the IPQ PWM driver.
> Therefore the PWM LED isn't configed in the tree.
>
> The original firmware of EA9350V3 from Linksys can only boot ARM32 kernels.
> However there seem to a identical device that come with 64bit firmware.
> Also There are seems to be no way to boot ARM64 kernels on EA9350.
>
> Therefore,the only way to boot on EA9350 V3 is using this tree and a 32bit kernel.
>
> Signed-off-by: Karl Chan <exxxxkc@...googleoff.me>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/ipq5018-linksys-jamaica.dts | 109 ++++++++++++++++++
> 2 files changed, 110 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-linksys-jamaica.dts
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
--
With best wishes
Dmitry
Powered by blists - more mailing lists