[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <e247f331cb72829fcbdfda74f31a59cbad1a6006.1728288535.git.matthias.schiffer@ew.tq-group.com>
Date: Mon, 7 Oct 2024 10:23:58 +0200
From: Matthias Schiffer <matthias.schiffer@...tq-group.com>
To: Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
Vincent Mailhol <mailhol.vincent@...adoo.fr>
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Martin Hundebøll <martin@...nix.com>,
Markus Schneider-Pargmann <msp@...libre.com>,
"Felipe Balbi (Intel)" <balbi@...nel.org>,
Raymond Tan <raymond.tan@...el.com>,
Jarkko Nikula <jarkko.nikula@...ux.intel.com>,
linux-can@...r.kernel.org,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux@...tq-group.com,
Matthias Schiffer <matthias.schiffer@...tq-group.com>
Subject: [PATCH v4 1/2] can: m_can: set init flag earlier in probe
While an m_can controller usually already has the init flag from a
hardware reset, no such reset happens on the integrated m_can_pci of the
Intel Elkhart Lake. If the CAN controller is found in an active state,
m_can_dev_setup() would fail because m_can_niso_supported() calls
m_can_cccr_update_bits(), which refuses to modify any other configuration
bits when CCCR_INIT is not set.
To avoid this issue, set CCCR_INIT before attempting to modify any other
configuration flags.
Fixes: cd5a46ce6fa6 ("can: m_can: don't enable transceiver when probing")
Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>
Reviewed-by: Markus Schneider-Pargmann <msp@...libre.com>
---
v2: no changes
v3: updated comment to mention Elkhart Lake
v4: added Reviewed-by
drivers/net/can/m_can/m_can.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 012c3d22b01dd..c85ac1b15f723 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1681,6 +1681,14 @@ static int m_can_dev_setup(struct m_can_classdev *cdev)
return -EINVAL;
}
+ /* Write the INIT bit, in case no hardware reset has happened before
+ * the probe (for example, it was observed that the Intel Elkhart Lake
+ * SoCs do not properly reset the CAN controllers on reboot)
+ */
+ err = m_can_cccr_update_bits(cdev, CCCR_INIT, CCCR_INIT);
+ if (err)
+ return err;
+
if (!cdev->is_peripheral)
netif_napi_add(dev, &cdev->napi, m_can_poll);
@@ -1732,11 +1740,7 @@ static int m_can_dev_setup(struct m_can_classdev *cdev)
return -EINVAL;
}
- /* Forcing standby mode should be redundant, as the chip should be in
- * standby after a reset. Write the INIT bit anyways, should the chip
- * be configured by previous stage.
- */
- return m_can_cccr_update_bits(cdev, CCCR_INIT, CCCR_INIT);
+ return 0;
}
static void m_can_stop(struct net_device *dev)
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/
Powered by blists - more mailing lists