[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241007095445.19340-1-alvin.paulp@amd.com>
Date: Mon, 7 Oct 2024 15:24:45 +0530
From: Paul Alvin <alvin.paulp@....com>
To: <michal.simek@....com>, <adrian.hunter@...el.com>,
<ulf.hansson@...aro.org>
CC: <git@....com>, <alvin.paulp@....com>,
<linux-arm-kernel@...ts.infradead.org>, <linux-mmc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v2] mmc: sdhci-of-arasan: Support for emmc hardware reset
Add hw_reset callback to support emmc hardware reset, this callback get
called from the mmc core only when "cap-mmc-hw-reset" property is
defined in the DT.
Signed-off-by: Paul Alvin <alvin.paulp@....com>
---
Changes in v2:
- Updated the CC list
drivers/mmc/host/sdhci-of-arasan.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 5edd024347bd..0cb05bdec34d 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -76,6 +76,8 @@
#define FREQSEL_225M_200M 0x7
#define PHY_DLL_TIMEOUT_MS 100
+#define SDHCI_HW_RST_EN BIT(4)
+
/* Default settings for ZynqMP Clock Phases */
#define ZYNQMP_ICLK_PHASE {0, 63, 63, 0, 63, 0, 0, 183, 54, 0, 0}
#define ZYNQMP_OCLK_PHASE {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0}
@@ -475,6 +477,21 @@ static void sdhci_arasan_reset(struct sdhci_host *host, u8 mask)
}
}
+static void sdhci_arasan_hw_reset(struct sdhci_host *host)
+{
+ u8 reg;
+
+ reg = sdhci_readb(host, SDHCI_POWER_CONTROL);
+ reg |= SDHCI_HW_RST_EN;
+ sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
+ /* As per eMMC spec, minimum 1us is required but give it 2us for good measure */
+ usleep_range(2, 5);
+ reg &= ~SDHCI_HW_RST_EN;
+ sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
+ /* As per eMMC spec, minimum 200us is required but give it 300us for good measure */
+ usleep_range(300, 500);
+}
+
static int sdhci_arasan_voltage_switch(struct mmc_host *mmc,
struct mmc_ios *ios)
{
@@ -505,6 +522,7 @@ static const struct sdhci_ops sdhci_arasan_ops = {
.reset = sdhci_arasan_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.set_power = sdhci_set_power_and_bus_voltage,
+ .hw_reset = sdhci_arasan_hw_reset,
};
static u32 sdhci_arasan_cqhci_irq(struct sdhci_host *host, u32 intmask)
--
2.17.1
Powered by blists - more mailing lists