[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241007103440.38416-2-brgl@bgdev.pl>
Date: Mon, 7 Oct 2024 12:34:40 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Keerthy <j-keerthy@...com>,
Linus Walleij <linus.walleij@...aro.org>
Cc: linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [PATCH v2 2/2] gpio: davinci: use generic device properties
From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
OF-specific routines should not be used unless necessary. Generic device
properties are preferred so switch to using them in the driver code.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
---
drivers/gpio/gpio-davinci.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 1da1d7c7ac2d..8c033e8cf3c9 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -15,7 +15,6 @@
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
-#include <linux/of.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/property.h>
@@ -159,14 +158,13 @@ static int davinci_gpio_probe(struct platform_device *pdev)
unsigned int ngpio, nbank, nirq, gpio_unbanked;
struct davinci_gpio_controller *chips;
struct device *dev = &pdev->dev;
- struct device_node *dn = dev_of_node(dev);
/*
* The gpio banks conceptually expose a segmented bitmap,
* and "ngpio" is one more than the largest zero-based
* bit index that's valid.
*/
- ret = of_property_read_u32(dn, "ti,ngpio", &ngpio);
+ ret = device_property_read_u32(dev, "ti,ngpio", &ngpio);
if (ret)
return dev_err_probe(dev, ret, "Failed to get the number of GPIOs\n");
if (ngpio == 0)
@@ -177,8 +175,8 @@ static int davinci_gpio_probe(struct platform_device *pdev)
* interrupts is equal to number of gpios else all are banked so
* number of interrupts is equal to number of banks(each with 16 gpios)
*/
- ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked",
- &gpio_unbanked);
+ ret = device_property_read_u32(dev, "ti,davinci-gpio-unbanked",
+ &gpio_unbanked);
if (ret)
return dev_err_probe(dev, ret, "Failed to get the unbanked GPIOs property\n");
--
2.43.0
Powered by blists - more mailing lists