lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241007035235.2254138-4-ryan_chen@aspeedtech.com>
Date: Mon, 7 Oct 2024 11:52:35 +0800
From: Ryan Chen <ryan_chen@...eedtech.com>
To: <brendan.higgins@...ux.dev>, <benh@...nel.crashing.org>, <joel@....id.au>,
	<andi.shyti@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
	<conor+dt@...nel.org>, <andrew@...econstruct.com.au>,
	<p.zabel@...gutronix.de>, <andriy.shevchenko@...ux.intel.com>,
	<linux-i2c@...r.kernel.org>, <openbmc@...ts.ozlabs.org>,
	<devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
	<linux-aspeed@...ts.ozlabs.org>, <linux-kernel@...r.kernel.org>,
	<ryan_chen@...eedtech.com>
Subject: [PATCH v15 3/3] i2c: aspeed: support AST2600 i2c new register target mode driver

This patch is for i2c new register target mode driver.

Signed-off-by: Ryan Chen <ryan_chen@...eedtech.com>
---
 drivers/i2c/busses/i2c-ast2600.c | 561 +++++++++++++++++++++++++++++--
 1 file changed, 541 insertions(+), 20 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ast2600.c b/drivers/i2c/busses/i2c-ast2600.c
index 17ba0ee77c27..6e9fcb1ebade 100644
--- a/drivers/i2c/busses/i2c-ast2600.c
+++ b/drivers/i2c/busses/i2c-ast2600.c
@@ -255,7 +255,7 @@ struct ast2600_i2c_bus {
 	struct i2c_timings	timing_info;
 	struct completion	cmd_complete;
 	struct i2c_msg		*msgs;
-	u8			*controller_dma_safe_buf;
+	u8			*dma_safe_buf;
 	dma_addr_t		controller_dma_addr;
 	u32			apb_clk;
 	u32			timeout;
@@ -271,6 +271,13 @@ struct ast2600_i2c_bus {
 	/* Buffer mode */
 	void __iomem		*buf_base;
 	struct i2c_smbus_alert_setup	alert_data;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* target structure */
+	int			target_operate;
+	unsigned char	*target_dma_buf;
+	dma_addr_t		target_dma_addr;
+	struct i2c_client	*target;
+#endif
 };
 
 static u32 ast2600_select_i2c_clock(struct ast2600_i2c_bus *i2c_bus)
@@ -361,6 +368,388 @@ static u8 ast2600_i2c_recover_bus(struct ast2600_i2c_bus *i2c_bus)
 	return ret;
 }
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static void ast2600_i2c_target_packet_dma_irq(struct ast2600_i2c_bus *i2c_bus, u32 sts)
+{
+	int target_rx_len = 0;
+	u32 cmd = 0;
+	u8 value;
+	int i;
+
+	sts &= ~(AST2600_I2CS_SLAVE_PENDING);
+	/* Handle i2c target timeout condition */
+	if (AST2600_I2CS_INACTIVE_TO & sts) {
+		cmd = TARGET_TRIGGER_CMD;
+		cmd |= AST2600_I2CS_RX_DMA_EN;
+		writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+		       i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+		writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+		writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_ISR);
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+		return;
+	}
+
+	sts &= ~(AST2600_I2CS_PKT_DONE | AST2600_I2CS_PKT_ERROR);
+
+	switch (sts) {
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_RX_DMA:
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_WAIT_RX_DMA:
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+		target_rx_len = AST2600_I2C_GET_RX_DMA_LEN(readl(i2c_bus->reg_base +
+						      AST2600_I2CS_DMA_LEN_STS));
+		for (i = 0; i < target_rx_len; i++) {
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED,
+					&i2c_bus->target_dma_buf[i]);
+		}
+		writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+		       i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+		cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_DMA_EN;
+		break;
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_STOP:
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+		writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+		       i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+		cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_DMA_EN;
+		break;
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE_NAK |
+			AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_WAIT_RX_DMA |
+			AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+	case AST2600_I2CS_RX_DONE_NAK | AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+	case AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_RX_DMA | AST2600_I2CS_STOP:
+	case AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+	case AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_RX_DMA:
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+		if (sts & AST2600_I2CS_SLAVE_MATCH)
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+		target_rx_len = AST2600_I2C_GET_RX_DMA_LEN(readl(i2c_bus->reg_base +
+						      AST2600_I2CS_DMA_LEN_STS));
+		for (i = 0; i < target_rx_len; i++) {
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED,
+					&i2c_bus->target_dma_buf[i]);
+		}
+		writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+		       i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+		if (sts & AST2600_I2CS_STOP)
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+		cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_DMA_EN;
+		break;
+
+	/* it is Mw data Mr coming -> it need send tx */
+	case AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_TX_DMA:
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_TX_DMA:
+		/* it should be repeat start read */
+		if (sts & AST2600_I2CS_SLAVE_MATCH)
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+		target_rx_len = AST2600_I2C_GET_RX_DMA_LEN(readl(i2c_bus->reg_base +
+						      AST2600_I2CS_DMA_LEN_STS));
+		for (i = 0; i < target_rx_len; i++) {
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED,
+					&i2c_bus->target_dma_buf[i]);
+		}
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_REQUESTED,
+				&i2c_bus->target_dma_buf[0]);
+		writel(0, i2c_bus->reg_base + AST2600_I2CS_DMA_LEN_STS);
+		writel(AST2600_I2CS_SET_TX_DMA_LEN(1),
+		       i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+		cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_TX_DMA_EN;
+		break;
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_WAIT_TX_DMA:
+		/* First Start read */
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_REQUESTED,
+				&i2c_bus->target_dma_buf[0]);
+		writel(AST2600_I2CS_SET_TX_DMA_LEN(1),
+		       i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+		cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_TX_DMA_EN;
+		break;
+	case AST2600_I2CS_WAIT_TX_DMA:
+		/* it should be next start read */
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_PROCESSED,
+				&i2c_bus->target_dma_buf[0]);
+		writel(0, i2c_bus->reg_base + AST2600_I2CS_DMA_LEN_STS);
+		writel(AST2600_I2CS_SET_TX_DMA_LEN(1),
+		       i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+		cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_TX_DMA_EN;
+		break;
+	case AST2600_I2CS_TX_NAK | AST2600_I2CS_STOP:
+		/* it just tx complete */
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+		writel(0, i2c_bus->reg_base + AST2600_I2CS_DMA_LEN_STS);
+		writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+		       i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+		cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_DMA_EN;
+		break;
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE:
+		cmd = 0;
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+		break;
+	case AST2600_I2CS_STOP:
+		cmd = 0;
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+		break;
+	default:
+		dev_dbg(i2c_bus->dev, "unhandled target isr case %x, sts %x\n", sts,
+			readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF));
+		break;
+	}
+
+	if (cmd)
+		writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+	writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_ISR);
+	readl(i2c_bus->reg_base + AST2600_I2CS_ISR);
+}
+
+static void ast2600_i2c_target_packet_buff_irq(struct ast2600_i2c_bus *i2c_bus, u32 sts)
+{
+	int target_rx_len = 0;
+	u32 cmd = 0;
+	u8 value;
+	int i;
+
+	/* due to controller target is common buffer, need force the master stop not issue */
+	if (readl(i2c_bus->reg_base + AST2600_I2CM_CMD_STS) & GENMASK(15, 0)) {
+		writel(0, i2c_bus->reg_base + AST2600_I2CM_CMD_STS);
+		i2c_bus->cmd_err = -EBUSY;
+		writel(0, i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+		complete(&i2c_bus->cmd_complete);
+	}
+
+	/* Handle i2c target timeout condition */
+	if (AST2600_I2CS_INACTIVE_TO & sts) {
+		writel(TARGET_TRIGGER_CMD, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+		writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_ISR);
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+		i2c_bus->target_operate = 0;
+		return;
+	}
+
+	sts &= ~(AST2600_I2CS_PKT_DONE | AST2600_I2CS_PKT_ERROR);
+
+	if (sts & AST2600_I2CS_SLAVE_MATCH)
+		i2c_bus->target_operate = 1;
+
+	switch (sts) {
+	case AST2600_I2CS_SLAVE_PENDING | AST2600_I2CS_WAIT_RX_DMA |
+		 AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+	case AST2600_I2CS_SLAVE_PENDING |
+		 AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+	case AST2600_I2CS_SLAVE_PENDING |
+		 AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_STOP:
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+		fallthrough;
+	case AST2600_I2CS_SLAVE_PENDING |
+		 AST2600_I2CS_WAIT_RX_DMA | AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE:
+	case AST2600_I2CS_WAIT_RX_DMA | AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE:
+	case AST2600_I2CS_WAIT_RX_DMA | AST2600_I2CS_SLAVE_MATCH:
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+		cmd = TARGET_TRIGGER_CMD;
+		if (sts & AST2600_I2CS_RX_DONE) {
+			target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+							       AST2600_I2CC_BUFF_CTRL));
+			for (i = 0; i < target_rx_len; i++) {
+				value = readb(i2c_bus->buf_base + 0x10 + i);
+				i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+			}
+		}
+		if (readl(i2c_bus->reg_base + AST2600_I2CS_CMD_STS) & AST2600_I2CS_RX_BUFF_EN)
+			cmd = 0;
+		else
+			cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_BUFF_EN;
+
+		writel(AST2600_I2CC_SET_RX_BUF_LEN(i2c_bus->buf_size),
+		       i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+		break;
+	case AST2600_I2CS_WAIT_RX_DMA | AST2600_I2CS_RX_DONE:
+		cmd = TARGET_TRIGGER_CMD;
+		target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+						       AST2600_I2CC_BUFF_CTRL));
+		for (i = 0; i < target_rx_len; i++) {
+			value = readb(i2c_bus->buf_base + 0x10 + i);
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+		}
+		cmd |= AST2600_I2CS_RX_BUFF_EN;
+		writel(AST2600_I2CC_SET_RX_BUF_LEN(i2c_bus->buf_size),
+		       i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+		break;
+	case AST2600_I2CS_SLAVE_PENDING | AST2600_I2CS_WAIT_RX_DMA |
+				AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+		cmd = TARGET_TRIGGER_CMD;
+		target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+								 AST2600_I2CC_BUFF_CTRL));
+		for (i = 0; i < target_rx_len; i++) {
+			value = readb(i2c_bus->buf_base + 0x10 + i);
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+		}
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+		cmd |= AST2600_I2CS_RX_BUFF_EN;
+		writel(AST2600_I2CC_SET_RX_BUF_LEN(i2c_bus->buf_size),
+		       i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+		break;
+	case AST2600_I2CS_SLAVE_PENDING | AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+		cmd = TARGET_TRIGGER_CMD;
+		target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+								 AST2600_I2CC_BUFF_CTRL));
+		for (i = 0; i < target_rx_len; i++) {
+			value = readb(i2c_bus->buf_base + 0x10 + i);
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+		}
+		/* workaround for avoid next start with len != 0 */
+		writel(BIT(0), i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+		break;
+	case AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+		cmd = TARGET_TRIGGER_CMD;
+		target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+								 AST2600_I2CC_BUFF_CTRL));
+		for (i = 0; i < target_rx_len; i++) {
+			value = readb(i2c_bus->buf_base + 0x10 + i);
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+		}
+		/* workaround for avoid next start with len != 0 */
+		writel(BIT(0), i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+		break;
+	case AST2600_I2CS_WAIT_TX_DMA | AST2600_I2CS_SLAVE_MATCH:
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_REQUESTED, &value);
+		writeb(value, i2c_bus->buf_base);
+		writel(AST2600_I2CC_SET_TX_BUF_LEN(1),
+		       i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+		cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_TX_BUFF_EN;
+		break;
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_WAIT_TX_DMA | AST2600_I2CS_RX_DONE:
+	case AST2600_I2CS_WAIT_TX_DMA | AST2600_I2CS_RX_DONE:
+	case AST2600_I2CS_WAIT_TX_DMA:
+		if (sts & AST2600_I2CS_SLAVE_MATCH)
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+		if (sts & AST2600_I2CS_RX_DONE) {
+			target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+							AST2600_I2CC_BUFF_CTRL));
+			for (i = 0; i < target_rx_len; i++) {
+				value = readb(i2c_bus->buf_base + 0x10 + i);
+				i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+			}
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_REQUESTED, &value);
+		} else {
+			i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_PROCESSED, &value);
+		}
+		writeb(value, i2c_bus->buf_base);
+		writel(AST2600_I2CC_SET_TX_BUF_LEN(1),
+		       i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+		cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_TX_BUFF_EN;
+		break;
+	/* workaround : trigger the cmd twice to fix next state keep 1000000 */
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE:
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+		cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_BUFF_EN;
+		writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+		break;
+
+	case AST2600_I2CS_TX_NAK | AST2600_I2CS_STOP:
+	case AST2600_I2CS_STOP:
+		cmd = TARGET_TRIGGER_CMD;
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+		break;
+	default:
+		dev_dbg(i2c_bus->dev, "unhandled target isr case %x, sts %x\n", sts,
+			readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF));
+		break;
+	}
+
+	if (cmd)
+		writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+	writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_ISR);
+	readl(i2c_bus->reg_base + AST2600_I2CS_ISR);
+
+	if ((sts & AST2600_I2CS_STOP) && !(sts & AST2600_I2CS_SLAVE_PENDING))
+		i2c_bus->target_operate = 0;
+}
+
+static void ast2600_i2c_target_byte_irq(struct ast2600_i2c_bus *i2c_bus, u32 sts)
+{
+	u32 i2c_buff = readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF);
+	u32 cmd = AST2600_I2CS_ACTIVE_ALL;
+	u8 byte_data;
+	u8 value;
+
+	switch (sts) {
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_RX_DMA:
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+		/* first address match is address */
+		byte_data = AST2600_I2CC_GET_RX_BUFF(i2c_buff);
+		break;
+	case AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_RX_DMA:
+		byte_data = AST2600_I2CC_GET_RX_BUFF(i2c_buff);
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &byte_data);
+		break;
+	case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_TX_DMA:
+		cmd |= AST2600_I2CS_TX_CMD;
+		byte_data = AST2600_I2CC_GET_RX_BUFF(i2c_buff);
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_REQUESTED, &byte_data);
+		writel(byte_data, i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF);
+		break;
+	case AST2600_I2CS_TX_ACK | AST2600_I2CS_WAIT_TX_DMA:
+		cmd |= AST2600_I2CS_TX_CMD;
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_PROCESSED, &byte_data);
+		writel(byte_data, i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF);
+		break;
+	case AST2600_I2CS_STOP:
+	case AST2600_I2CS_STOP | AST2600_I2CS_TX_NAK:
+		i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+		break;
+	default:
+		dev_dbg(i2c_bus->dev, "unhandled pkt isr %x\n", sts);
+		break;
+	}
+	writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+	writel(sts, i2c_bus->reg_base + AST2600_I2CS_ISR);
+	readl(i2c_bus->reg_base + AST2600_I2CS_ISR);
+}
+
+static int ast2600_i2c_target_irq(struct ast2600_i2c_bus *i2c_bus)
+{
+	u32 ier = readl(i2c_bus->reg_base + AST2600_I2CS_IER);
+	u32 isr = readl(i2c_bus->reg_base + AST2600_I2CS_ISR);
+
+	if (!(isr & ier))
+		return 0;
+
+	/*
+	 * Target interrupt coming after Master package done
+	 * So need handle master first.
+	 */
+	if (readl(i2c_bus->reg_base + AST2600_I2CM_ISR) & AST2600_I2CM_PKT_DONE)
+		return 0;
+
+	isr &= ~(AST2600_I2CS_ADDR_INDICATE_MASK);
+
+	if (AST2600_I2CS_ADDR1_NAK & isr)
+		isr &= ~AST2600_I2CS_ADDR1_NAK;
+
+	if (AST2600_I2CS_ADDR2_NAK & isr)
+		isr &= ~AST2600_I2CS_ADDR2_NAK;
+
+	if (AST2600_I2CS_ADDR3_NAK & isr)
+		isr &= ~AST2600_I2CS_ADDR3_NAK;
+
+	if (AST2600_I2CS_ADDR_MASK & isr)
+		isr &= ~AST2600_I2CS_ADDR_MASK;
+
+	if (AST2600_I2CS_PKT_DONE & isr) {
+		if (i2c_bus->mode == DMA_MODE)
+			ast2600_i2c_target_packet_dma_irq(i2c_bus, isr);
+		else
+			ast2600_i2c_target_packet_buff_irq(i2c_bus, isr);
+	} else {
+		ast2600_i2c_target_byte_irq(i2c_bus, isr);
+	}
+
+	return 1;
+}
+#endif
+
 static int ast2600_i2c_setup_dma_tx(u32 cmd, struct ast2600_i2c_bus *i2c_bus)
 {
 	struct i2c_msg *msg = &i2c_bus->msgs[i2c_bus->msgs_index];
@@ -376,16 +765,16 @@ static int ast2600_i2c_setup_dma_tx(u32 cmd, struct ast2600_i2c_bus *i2c_bus)
 
 	if (cmd & AST2600_I2CM_START_CMD) {
 		cmd |= AST2600_I2CM_PKT_ADDR(msg->addr);
-		i2c_bus->controller_dma_safe_buf = i2c_get_dma_safe_msg_buf(msg, 1);
-		if (!i2c_bus->controller_dma_safe_buf)
+		i2c_bus->dma_safe_buf = i2c_get_dma_safe_msg_buf(msg, 1);
+		if (!i2c_bus->dma_safe_buf)
 			return -ENOMEM;
 		i2c_bus->controller_dma_addr =
-			dma_map_single(i2c_bus->dev, i2c_bus->controller_dma_safe_buf,
+			dma_map_single(i2c_bus->dev, i2c_bus->dma_safe_buf,
 				       msg->len, DMA_TO_DEVICE);
 		ret = dma_mapping_error(i2c_bus->dev, i2c_bus->controller_dma_addr);
 		if (ret) {
-			i2c_put_dma_safe_msg_buf(i2c_bus->controller_dma_safe_buf, msg, false);
-			i2c_bus->controller_dma_safe_buf = NULL;
+			i2c_put_dma_safe_msg_buf(i2c_bus->dma_safe_buf, msg, false);
+			i2c_bus->dma_safe_buf = NULL;
 			return ret;
 		}
 	}
@@ -502,16 +891,15 @@ static int ast2600_i2c_setup_dma_rx(struct ast2600_i2c_bus *i2c_bus)
 			cmd |= CONTROLLER_TRIGGER_LAST_STOP;
 	}
 	writel(AST2600_I2CM_SET_RX_DMA_LEN(xfer_len - 1), i2c_bus->reg_base + AST2600_I2CM_DMA_LEN);
-	i2c_bus->controller_dma_safe_buf = i2c_get_dma_safe_msg_buf(msg, 1);
-	if (!i2c_bus->controller_dma_safe_buf)
+	i2c_bus->dma_safe_buf = i2c_get_dma_safe_msg_buf(msg, 1);
+	if (!i2c_bus->dma_safe_buf)
 		return -ENOMEM;
 	i2c_bus->controller_dma_addr =
-		dma_map_single(i2c_bus->dev, i2c_bus->controller_dma_safe_buf,
-			       msg->len, DMA_FROM_DEVICE);
+		dma_map_single(i2c_bus->dev, i2c_bus->dma_safe_buf, msg->len, DMA_FROM_DEVICE);
 	ret = dma_mapping_error(i2c_bus->dev, i2c_bus->controller_dma_addr);
 	if (ret) {
-		i2c_put_dma_safe_msg_buf(i2c_bus->controller_dma_safe_buf, msg, false);
-		i2c_bus->controller_dma_safe_buf = NULL;
+		i2c_put_dma_safe_msg_buf(i2c_bus->dma_safe_buf, msg, false);
+		i2c_bus->dma_safe_buf = NULL;
 		return ret;
 	}
 	writel(i2c_bus->controller_dma_addr, i2c_bus->reg_base + AST2600_I2CM_RX_DMA);
@@ -659,9 +1047,8 @@ static void ast2600_i2c_controller_package_irq(struct ast2600_i2c_bus *i2c_bus,
 			if (i2c_bus->mode == DMA_MODE) {
 				dma_unmap_single(i2c_bus->dev, i2c_bus->controller_dma_addr,
 						 msg->len, DMA_TO_DEVICE);
-				i2c_put_dma_safe_msg_buf(i2c_bus->controller_dma_safe_buf,
-							 msg, true);
-				i2c_bus->controller_dma_safe_buf = NULL;
+				i2c_put_dma_safe_msg_buf(i2c_bus->dma_safe_buf, msg, true);
+				i2c_bus->dma_safe_buf = NULL;
 			}
 			i2c_bus->msgs_index++;
 			if (i2c_bus->msgs_index == i2c_bus->msgs_count) {
@@ -683,6 +1070,20 @@ static void ast2600_i2c_controller_package_irq(struct ast2600_i2c_bus *i2c_bus,
 		}
 		break;
 	case AST2600_I2CM_RX_DONE:
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+		/*
+		 * Workaround for controller/target package mode enable rx done stuck issue
+		 * When master go for first read (RX_DONE), target mode will also effect
+		 * Then controller will send nack, not operate anymore.
+		 */
+		if (readl(i2c_bus->reg_base + AST2600_I2CS_CMD_STS) & AST2600_I2CS_PKT_MODE_EN) {
+			u32 target_cmd = readl(i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+
+			writel(0, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+			writel(target_cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+		}
+		fallthrough;
+#endif
 	case AST2600_I2CM_RX_DONE | AST2600_I2CM_NORMAL_STOP:
 		/* do next rx */
 		if (i2c_bus->mode == DMA_MODE) {
@@ -712,9 +1113,8 @@ static void ast2600_i2c_controller_package_irq(struct ast2600_i2c_bus *i2c_bus,
 			if (i2c_bus->mode == DMA_MODE) {
 				dma_unmap_single(i2c_bus->dev, i2c_bus->controller_dma_addr,
 						 msg->len, DMA_FROM_DEVICE);
-				i2c_put_dma_safe_msg_buf(i2c_bus->controller_dma_safe_buf,
-							 msg, true);
-				i2c_bus->controller_dma_safe_buf = NULL;
+				i2c_put_dma_safe_msg_buf(i2c_bus->dma_safe_buf, msg, true);
+				i2c_bus->dma_safe_buf = NULL;
 			}
 
 			i2c_bus->msgs_index++;
@@ -812,6 +1212,12 @@ static irqreturn_t ast2600_i2c_bus_irq(int irq, void *dev_id)
 {
 	struct ast2600_i2c_bus *i2c_bus = dev_id;
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	if (readl(i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL) & AST2600_I2CC_SLAVE_EN) {
+		if (ast2600_i2c_target_irq(i2c_bus))
+			return IRQ_HANDLED;
+	}
+#endif
 	return IRQ_RETVAL(ast2600_i2c_controller_irq(i2c_bus));
 }
 
@@ -828,12 +1234,30 @@ static int ast2600_i2c_controller_xfer(struct i2c_adapter *adap, struct i2c_msg
 			return ret;
 	}
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	if (i2c_bus->mode == BUFF_MODE) {
+		if (i2c_bus->target_operate)
+			return -EBUSY;
+		/* disable target isr */
+		writel(0, i2c_bus->reg_base + AST2600_I2CS_IER);
+		if (readl(i2c_bus->reg_base + AST2600_I2CS_ISR) || i2c_bus->target_operate) {
+			writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_IER);
+			return -EBUSY;
+		}
+	}
+#endif
+
 	i2c_bus->cmd_err = 0;
 	i2c_bus->msgs = msgs;
 	i2c_bus->msgs_index = 0;
 	i2c_bus->msgs_count = num;
 	reinit_completion(&i2c_bus->cmd_complete);
 	ret = ast2600_i2c_do_start(i2c_bus);
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* avoid race condication target is wait and master wait 1st target operate */
+	if (i2c_bus->mode == BUFF_MODE)
+		writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_IER);
+#endif
 	if (ret)
 		goto controller_out;
 	timeout = wait_for_completion_timeout(&i2c_bus->cmd_complete, i2c_bus->adap.timeout);
@@ -845,7 +1269,26 @@ static int ast2600_i2c_controller_xfer(struct i2c_adapter *adap, struct i2c_msg
 			readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF));
 		writel(0, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
 		writel(ctrl, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+		if (ctrl & AST2600_I2CC_SLAVE_EN) {
+			u32 cmd = TARGET_TRIGGER_CMD;
 
+			if (i2c_bus->mode == DMA_MODE) {
+				cmd |= AST2600_I2CS_RX_DMA_EN;
+				writel(i2c_bus->target_dma_addr,
+				       i2c_bus->reg_base + AST2600_I2CS_RX_DMA);
+				writel(i2c_bus->target_dma_addr,
+				       i2c_bus->reg_base + AST2600_I2CS_TX_DMA);
+				writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+				       i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+			} else if (i2c_bus->mode == BUFF_MODE) {
+				cmd = TARGET_TRIGGER_CMD;
+			} else {
+				cmd &= ~AST2600_I2CS_PKT_MODE_EN;
+			}
+			writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+		}
+#endif
 		if (i2c_bus->multi_master &&
 		    (readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF) &
 		    AST2600_I2CC_BUS_BUSY_STS))
@@ -860,8 +1303,8 @@ static int ast2600_i2c_controller_xfer(struct i2c_adapter *adap, struct i2c_msg
 
 controller_out:
 	if (i2c_bus->mode == DMA_MODE) {
-		kfree(i2c_bus->controller_dma_safe_buf);
-		i2c_bus->controller_dma_safe_buf = NULL;
+		kfree(i2c_bus->dma_safe_buf);
+		i2c_bus->dma_safe_buf = NULL;
 	}
 
 	return ret;
@@ -889,7 +1332,78 @@ static void ast2600_i2c_init(struct ast2600_i2c_bus *i2c_bus)
 
 	/* Clear Interrupt */
 	writel(GENMASK(27, 0), i2c_bus->reg_base + AST2600_I2CM_ISR);
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* for memory buffer initial */
+	if (i2c_bus->mode == DMA_MODE) {
+		i2c_bus->target_dma_buf =
+			dmam_alloc_coherent(i2c_bus->dev, I2C_TARGET_MSG_BUF_SIZE,
+					    &i2c_bus->target_dma_addr, GFP_KERNEL);
+		if (!i2c_bus->target_dma_buf)
+			return;
+	}
+
+	writel(GENMASK(27, 0), i2c_bus->reg_base + AST2600_I2CS_ISR);
+
+	if (i2c_bus->mode == BYTE_MODE)
+		writel(GENMASK(15, 0), i2c_bus->reg_base + AST2600_I2CS_IER);
+	else
+		writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_IER);
+#endif
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static int ast2600_i2c_reg_target(struct i2c_client *client)
+{
+	struct ast2600_i2c_bus *i2c_bus = i2c_get_adapdata(client->adapter);
+	u32 cmd = TARGET_TRIGGER_CMD;
+
+	if (i2c_bus->target)
+		return -EINVAL;
+
+	dev_dbg(i2c_bus->dev, "target addr %x\n", client->addr);
+
+	writel(0, i2c_bus->reg_base + AST2600_I2CS_ADDR_CTRL);
+	writel(AST2600_I2CC_SLAVE_EN | readl(i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL),
+	       i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+
+	/* trigger rx buffer */
+	if (i2c_bus->mode == DMA_MODE) {
+		cmd |= AST2600_I2CS_RX_DMA_EN;
+		writel(i2c_bus->target_dma_addr, i2c_bus->reg_base + AST2600_I2CS_RX_DMA);
+		writel(i2c_bus->target_dma_addr, i2c_bus->reg_base + AST2600_I2CS_TX_DMA);
+		writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+		       i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+	} else if (i2c_bus->mode == BUFF_MODE) {
+		cmd = TARGET_TRIGGER_CMD;
+	} else {
+		cmd &= ~AST2600_I2CS_PKT_MODE_EN;
+	}
+
+	writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+	i2c_bus->target = client;
+	/* Set target addr. */
+	writel(client->addr | AST2600_I2CS_ADDR1_ENABLE,
+	       i2c_bus->reg_base + AST2600_I2CS_ADDR_CTRL);
+
+	return 0;
+}
+
+static int ast2600_i2c_unreg_target(struct i2c_client *client)
+{
+	struct ast2600_i2c_bus *i2c_bus = i2c_get_adapdata(client->adapter);
+
+	/* Turn off target mode. */
+	writel(~AST2600_I2CC_SLAVE_EN & readl(i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL),
+	       i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+	writel(readl(i2c_bus->reg_base + AST2600_I2CS_ADDR_CTRL) & ~AST2600_I2CS_ADDR1_MASK,
+	       i2c_bus->reg_base + AST2600_I2CS_ADDR_CTRL);
+
+	i2c_bus->target = NULL;
+
+	return 0;
 }
+#endif
 
 static u32 ast2600_i2c_functionality(struct i2c_adapter *adap)
 {
@@ -899,6 +1413,10 @@ static u32 ast2600_i2c_functionality(struct i2c_adapter *adap)
 static const struct i2c_algorithm i2c_ast2600_algorithm = {
 	.xfer = ast2600_i2c_controller_xfer,
 	.functionality = ast2600_i2c_functionality,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	.reg_target = ast2600_i2c_reg_target,
+	.unreg_target = ast2600_i2c_unreg_target,
+#endif
 };
 
 static int ast2600_i2c_probe(struct platform_device *pdev)
@@ -934,6 +1452,9 @@ static int ast2600_i2c_probe(struct platform_device *pdev)
 		regmap_write(i2c_bus->global_regs, AST2600_I2CG_CLK_DIV_CTRL, I2CCG_DIV_CTRL);
 	}
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	i2c_bus->target_operate = 0;
+#endif
 	i2c_bus->dev = dev;
 	i2c_bus->mode = BUFF_MODE;
 
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ