| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFpwmnm4iSrdKW5H2Xz26W=LFLFEYQKfLCoJ5e79a09H_Q@mail.gmail.com>
Date: Tue, 8 Oct 2024 16:35:57 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: chaotian.jing@...iatek.com, matthias.bgg@...il.com,
linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org,
kernel@...labora.com
Subject: Re: [PATCH v2] mmc: mtk-sd: Implement Host Software Queue for eMMC
and SD Card
On Mon, 30 Sept 2024 at 11:01, AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com> wrote:
>
> Add support for Host Software Queue (HSQ) and enable it when the
> controller instance does not have Command Queue Engine HW support.
>
> It was chosen to enable HSQ only for eMMC and SD/MicroSD cards
> and not for SDIO as performance improvements are seen only for
> the former.
>
> Performance was measured with a SanDisk Extreme Ultra A2 MicroSD
> card in a MediaTek MT8195T Acer Chromebook Spin 513 (CP513-2H),
> by running FIO (bs=4k) on an ArchLinux userspace.
>
> .... Summarizing ....
> Random read: +24.28% IOPS, +24.29% BW
> Sequential read: +3.14% IOPS, +3.49% BW
> Random RW (avg): +50.53% IOPS, +50.68% BW
>
> Below, more data from the benchmarks.
>
> Before:
> - Random read: IOPS=1643, BW=6574KiB/s
> bw ( KiB/s): min= 4578, max= 7440, per=99.95%, avg=6571.55, stdev=74.16, samples=953
> iops : min= 1144, max= 1860, avg=1642.14, stdev=18.54, samples=953
> lat (msec) : 100=0.01%, 250=0.12%, 500=0.38%, 750=97.89%, 1000=1.44%, 2000=0.16%
> - Sequential read: IOPS=19.1k, BW=74.4MiB/s
> bw ( KiB/s): min=12288, max=118483, per=100.00%, avg=76293.38, stdev=1971.42, samples=956
> iops : min= 3072, max=29620, avg=19072.14, stdev=492.87, samples=956
> lat (msec) : 4=0.01%, 10=0.01%, 20=0.21%, 50=23.95%, 100=75.67%, 250=0.05%, 500=0.03%, 750=0.08%
> - Random R/W: read: IOPS=282, BW=1129KiB/s (1156kB/s) write: IOPS=284, BW=1136KiB/s
> read bw ( KiB/s): min= 31, max= 3496, per=100.00%, avg=1703.67, stdev=155.42, samples=630
> read iops : min= 7, max= 873, avg=425.22, stdev=38.85, samples=630
> wri bw ( KiB/s): min= 31, max= 3443, per=100.00%, avg=1674.27, stdev=164.23, samples=644
> wri iops : min= 7, max= 860, avg=417.87, stdev=41.03, samples=644
> lat (msec) : 250=0.13%, 500=0.44%, 750=0.84%, 1000=22.29%, 2000=74.01%, >=2000=2.30%
>
> After:
> - Random read: IOPS=2042, BW=8171KiB/s
> bw ( KiB/s): min= 4907, max= 9072, per=99.94%, avg=8166.80, stdev=93.77, samples=954
> iops : min= 1226, max= 2268, avg=2040.78, stdev=23.41, samples=954
> lat (msec) : 100=0.03%, 250=0.13%, 500=52.88%, 750=46.64%, 1000=0.32%
> - Sequential read: IOPS=19.7k, BW=77.0MiB/s
> bw ( KiB/s): min=67980, max=94248, per=100.00%, avg=78894.27, stdev=1475.07, samples=956
> iops : min=16994, max=23562, avg=19722.45, stdev=368.76, samples=956
> lat (msec) : 4=0.01%, 10=0.01%, 20=0.05%, 50=28.78%, 100=71.14%, 250=0.01%, 500=0.02%
> - Random R/W: read: IOPS=424, BW=1699KiB/s write: IOPS=428, BW=1714KiB/s
> read bw ( KiB/s): min= 228, max= 2856, per=100.00%, avg=1796.60, stdev=112.59, samples=901
> read iops : min= 54, max= 712, avg=447.81, stdev=28.21, samples=901
> wri bw ( KiB/s): min= 28, max= 2904, per=100.00%, avg=1780.11, stdev=128.27, samples=916
> wri iops : min= 4, max= 724, avg=443.69, stdev=32.14, samples=916
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Applied for next, thanks!
Kind regards
Uffe
> ---
>
> Changes in v2:
> - Added missing `select MMC_HSQ` for MMC_MTK Kconfig
>
> drivers/mmc/host/Kconfig | 1 +
> drivers/mmc/host/mtk-sd.c | 49 +++++++++++++++++++++++++++++++++++++--
> 2 files changed, 48 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 7199cb0bd0b9..0ba5a9f769fb 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -1009,6 +1009,7 @@ config MMC_MTK
> depends on COMMON_CLK
> select REGULATOR
> select MMC_CQHCI
> + select MMC_HSQ
> help
> This selects the MediaTek(R) Secure digital and Multimedia card Interface.
> If you have a machine with a integrated SD/MMC card reader, say Y or M here.
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 5165a33bf74b..a9a554bd3f44 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -33,6 +33,7 @@
> #include <linux/mmc/slot-gpio.h>
>
> #include "cqhci.h"
> +#include "mmc_hsq.h"
>
> #define MAX_BD_NUM 1024
> #define MSDC_NR_CLOCKS 3
> @@ -473,6 +474,7 @@ struct msdc_host {
> bool hs400_tuning; /* hs400 mode online tuning */
> bool internal_cd; /* Use internal card-detect logic */
> bool cqhci; /* support eMMC hw cmdq */
> + bool hsq_en; /* Host Software Queue is enabled */
> struct msdc_save_para save_para; /* used when gate HCLK */
> struct msdc_tune_para def_tune_para; /* default tune setting */
> struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> @@ -1170,7 +1172,9 @@ static void msdc_track_cmd_data(struct msdc_host *host, struct mmc_command *cmd)
>
> static void msdc_request_done(struct msdc_host *host, struct mmc_request *mrq)
> {
> + struct mmc_host *mmc = mmc_from_priv(host);
> unsigned long flags;
> + bool hsq_req_done;
>
> /*
> * No need check the return value of cancel_delayed_work, as only ONE
> @@ -1178,6 +1182,27 @@ static void msdc_request_done(struct msdc_host *host, struct mmc_request *mrq)
> */
> cancel_delayed_work(&host->req_timeout);
>
> + /*
> + * If the request was handled from Host Software Queue, there's almost
> + * nothing to do here, and we also don't need to reset mrq as any race
> + * condition would not have any room to happen, since HSQ stores the
> + * "scheduled" mrqs in an internal array of mrq slots anyway.
> + * However, if the controller experienced an error, we still want to
> + * reset it as soon as possible.
> + *
> + * Note that non-HSQ requests will still be happening at times, even
> + * though it is enabled, and that's what is going to reset host->mrq.
> + * Also, msdc_unprepare_data() is going to be called by HSQ when needed
> + * as HSQ request finalization will eventually call the .post_req()
> + * callback of this driver which, in turn, unprepares the data.
> + */
> + hsq_req_done = host->hsq_en ? mmc_hsq_finalize_request(mmc, mrq) : false;
> + if (hsq_req_done) {
> + if (host->error)
> + msdc_reset_hw(host);
> + return;
> + }
> +
> spin_lock_irqsave(&host->lock, flags);
> host->mrq = NULL;
> spin_unlock_irqrestore(&host->lock, flags);
> @@ -1187,7 +1212,7 @@ static void msdc_request_done(struct msdc_host *host, struct mmc_request *mrq)
> msdc_unprepare_data(host, mrq->data);
> if (host->error)
> msdc_reset_hw(host);
> - mmc_request_done(mmc_from_priv(host), mrq);
> + mmc_request_done(mmc, mrq);
> if (host->dev_comp->recheck_sdio_irq)
> msdc_recheck_sdio_irq(host);
> }
> @@ -1347,7 +1372,7 @@ static void msdc_ops_request(struct mmc_host *mmc, struct mmc_request *mrq)
> struct msdc_host *host = mmc_priv(mmc);
>
> host->error = 0;
> - WARN_ON(host->mrq);
> + WARN_ON(!host->hsq_en && host->mrq);
> host->mrq = mrq;
>
> if (mrq->data)
> @@ -2916,6 +2941,19 @@ static int msdc_drv_probe(struct platform_device *pdev)
> mmc->max_seg_size = 64 * 1024;
> /* Reduce CIT to 0x40 that corresponds to 2.35us */
> msdc_cqe_cit_cal(host, 2350);
> + } else if (mmc->caps2 & MMC_CAP2_NO_SDIO) {
> + /* Use HSQ on eMMC/SD (but not on SDIO) if HW CQE not supported */
> + struct mmc_hsq *hsq = devm_kzalloc(&pdev->dev, sizeof(*hsq), GFP_KERNEL);
> + if (!hsq) {
> + ret = -ENOMEM;
> + goto release;
> + }
> +
> + ret = mmc_hsq_init(hsq, mmc);
> + if (ret)
> + goto release;
> +
> + host->hsq_en = true;
> }
>
> ret = devm_request_irq(&pdev->dev, host->irq, msdc_irq,
> @@ -3043,6 +3081,9 @@ static int __maybe_unused msdc_runtime_suspend(struct device *dev)
> struct mmc_host *mmc = dev_get_drvdata(dev);
> struct msdc_host *host = mmc_priv(mmc);
>
> + if (host->hsq_en)
> + mmc_hsq_suspend(mmc);
> +
> msdc_save_reg(host);
>
> if (sdio_irq_claimed(mmc)) {
> @@ -3073,6 +3114,10 @@ static int __maybe_unused msdc_runtime_resume(struct device *dev)
> pinctrl_select_state(host->pinctrl, host->pins_uhs);
> enable_irq(host->irq);
> }
> +
> + if (host->hsq_en)
> + mmc_hsq_resume(mmc);
> +
> return 0;
> }
>
> --
> 2.46.1
>
Powered by blists - more mailing lists