[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <75f02c1c-e492-479e-a623-b9562aaed4ea@kontron.de>
Date: Tue, 8 Oct 2024 09:24:52 +0200
From: Frieder Schrempf <frieder.schrempf@...tron.de>
To: Frieder Schrempf <frieder@...s.de>, Conor Dooley <conor+dt@...nel.org>,
devicetree@...r.kernel.org, imx@...ts.linux.dev,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Rob Herring <robh@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>
Cc: Alexander Stein <alexander.stein@...tq-group.com>,
Conor Dooley <conor.dooley@...rochip.com>, Fabio Estevam
<festevam@...il.com>, Francesco Dolcini <francesco.dolcini@...adex.com>,
Gregor Herburger <gregor.herburger@...tq-group.com>,
Hiago De Franco <hiago.franco@...adex.com>,
Hugo Villeneuve <hvilleneuve@...onoff.com>,
Joao Paulo Goncalves <joao.goncalves@...adex.com>,
Josua Mayer <josua@...id-run.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Mathieu Othacehe <m.othacehe@...il.com>, Michael Walle <mwalle@...nel.org>,
Parthiban Nallathambi <parthiban@...umiz.com>, Peng Fan <peng.fan@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>
Subject: Re: [PATCH v3 0/3] Add support for Kontron OSM-S i.MX8MP SoM and
carrier boards
On 04.09.24 10:53 AM, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@...tron.de>
>
> Patch 1: board DT bindings
> Patch 2: OSM-S i.MX8MP SoM and BL carrier board devicetrees
> Patch 3: i.MX8MP SMARC module and eval carrier board devicetrees
>
> Changes for v3:
>
> * Address Shawn's review comments (thanks!)
> * Fix HDMI DDC interface
> * Fix gpio-hog pinctrl in DL devicetree
> * Fix DT check warnings in DL devicetree
> * Adjust LVDS panel node to match that of proposed DL i.MX8MM
>
> Changes for v2:
>
> DT bindings (patch1):
> * Add tags from Krzysztof and Conor (thanks!)
>
> SMARC DTs (patch 3):
> * Fix GPIO labels
> * Add support for TPM chip on SMARC module
> * Disable PWM in favor of GPIO5 on SMARC carrier
> * Enable LCDIF node to make HDMI work
> * Add support for GPIO expanders on SMARC carrier
> * Remove SPI flash as its removable and should be in an overlay
> * Add CAN regulators to fix transceiver enable
>
> Frieder Schrempf (3):
> dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards
> arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier
> board
> arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval
> carrier
Gentle ping for this series. Shawn, can you apply this for v6.13, please?
Thanks
Frieder
Powered by blists - more mailing lists