linux-kernel - [PATCH v5 0/3] arm64: dts: qcom: sc8280xp: enable WLAN and Bluetooth

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241008102545.40003-1-brgl@bgdev.pl>
Date: Tue,  8 Oct 2024 12:25:41 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konradybcio@...nel.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Johan Hovold <johan+linaro@...nel.org>,
	Kalle Valo <kvalo@...nel.org>,
	Stephan Gerhold <stephan.gerhold@...aro.org>
Cc: linux-arm-msm@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [PATCH v5 0/3] arm64: dts: qcom: sc8280xp: enable WLAN and Bluetooth

From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>

This correctly models the WLAN and Bluetooth modules on two boards using
the sc8280xp SoC. For the sc8280xp-crd we add the PMU, wifi and bluetooth
nodes with the correctly modelled wiring between them. For the X13s, we
rework existing nodes so that they align with the new DT bindings
contract.

v4 -> v5:
- put vreg_s10b under the "B" PMIC on the CRD instead of modeling it as a
  fixed regulator
- order pinctrl nodes alphabetically
- restore the drive-strength property for all pins to what bootfw sets it to
- disable bias on wlan-en pin on the CRD
- remove stray newline
- add the swctrl pins to the PMU node

v3 -> v4:
- bind bluetooth pins on X13s in patch 3/3
- only drop the regulator-always-on properties for vreg_s11b and vreg_s12b
  and fold this change into patch 3/3

v2 -> v3:
- move adding the bt-enable-gpios to the PMU on the CRD to patch 2/4
- add a patch removing the regulator-always-on property from regulators
  on X13s that no longer need it

v1 -> v2:
- fix commit message in patch 1/3
- drop drive-strength from the wlan enable pin function
- drop the calibration variant property from the wifi node of the CRD

Bartosz Golaszewski (3):
  arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855
  arm64: dts: qcom: sc8280xp-crd: enable bluetooth
  arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855

 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts     | 167 ++++++++++++++++++
 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 101 +++++++++--
 2 files changed, 254 insertions(+), 14 deletions(-)

-- 
2.30.2