| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5e838003-34c0-4d30-be62-2aa4b1efaae4@nxp.com>
Date: Wed, 9 Oct 2024 15:00:35 +0800
From: Liu Ying <victor.liu@....com>
To: Rob Herring <robh@...nel.org>
Cc: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, andrzej.hajda@...el.com,
neil.armstrong@...aro.org, rfoss@...nel.org,
Laurent.pinchart@...asonboard.com, jonas@...boo.se,
jernej.skrabec@...il.com, maarten.lankhorst@...ux.intel.com,
mripard@...nel.org, tzimmermann@...e.de, airlied@...il.com, simona@...ll.ch,
krzk+dt@...nel.org, conor+dt@...nel.org, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
catalin.marinas@....com, will@...nel.org, quic_bjorande@...cinc.com,
geert+renesas@...der.be, dmitry.baryshkov@...aro.org, arnd@...db.de,
nfraprado@...labora.com, o.rempel@...gutronix.de, y.moog@...tec.de
Subject: Re: [PATCH 5/8] dt-bindings: display: bridge: Add ITE IT6263 LVDS to
HDMI converter
Hi Rob,
On 10/02/2024, Rob Herring wrote:
> On Mon, Sep 30, 2024 at 01:29:00PM +0800, Liu Ying wrote:
>> Document ITE IT6263 LVDS to HDMI converter.
>>
>> Product link:
>> https://www.ite.com.tw/en/product/cate1/IT6263
>>
>> Signed-off-by: Liu Ying <victor.liu@....com>
>> ---
>> .../bindings/display/bridge/ite,it6263.yaml | 310 ++++++++++++++++++
>> 1 file changed, 310 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
>> new file mode 100644
>> index 000000000000..97fb81e5bc4a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
>> @@ -0,0 +1,310 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: ITE IT6263 LVDS to HDMI converter
>> +
>> +maintainers:
>> + - Liu Ying <victor.liu@....com>
>> +
>> +description: |
>> + The IT6263 is a high-performance single-chip De-SSC(De-Spread Spectrum) LVDS
>> + to HDMI converter. Combined with LVDS receiver and HDMI 1.4a transmitter,
>> + the IT6263 supports LVDS input and HDMI 1.4 output by conversion function.
>> + The built-in LVDS receiver can support single-link and dual-link LVDS inputs,
>> + and the built-in HDMI transmitter is fully compliant with HDMI 1.4a/3D, HDCP
>> + 1.2 and backward compatible with DVI 1.0 specification.
>> +
>> + The IT6263 also encodes and transmits up to 8 channels of I2S digital audio,
>> + with sampling rate up to 192KHz and sample size up to 24 bits. In addition,
>> + an S/PDIF input port takes in compressed audio of up to 192KHz frame rate.
>> +
>> + The newly supported High-Bit Rate(HBR) audio by HDMI specifications v1.3 is
>> + provided by the IT6263 in two interfaces: the four I2S input ports or the
>> + S/PDIF input port. With both interfaces the highest possible HBR frame rate
>> + is supported at up to 768KHz.
>> +
>> +properties:
>> + compatible:
>> + const: ite,it6263
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + maxItems: 1
>> + description: audio master clock
>> +
>> + clock-names:
>> + const: mclk
>> +
>> + reset-gpios:
>> + maxItems: 1
>> +
>> + ivdd-supply:
>> + description: 1.8V digital logic power
>> +
>> + ovdd-supply:
>> + description: 3.3V I/O pin power
>> +
>> + txavcc18-supply:
>> + description: 1.8V HDMI analog frontend power
>> +
>> + txavcc33-supply:
>> + description: 3.3V HDMI analog frontend power
>> +
>> + pvcc1-supply:
>> + description: 1.8V HDMI frontend core PLL power
>> +
>> + pvcc2-supply:
>> + description: 1.8V HDMI frontend filter PLL power
>> +
>> + avcc-supply:
>> + description: 3.3V LVDS frontend power
>> +
>> + anvdd-supply:
>> + description: 1.8V LVDS frontend analog power
>> +
>> + apvdd-supply:
>> + description: 1.8V LVDS frontend PLL power
>> +
>> + "#sound-dai-cells":
>> + const: 0
>> +
>> + ite,i2s-audio-fifo-sources:
>> + $ref: /schemas/types.yaml#/definitions/uint32-array
>> + minItems: 1
>> + maxItems: 4
>> + items:
>> + enum: [0, 1, 2, 3]
>> + description:
>> + Each array element indicates the pin number of an I2S serial data input
>> + line which is connected to an audio FIFO, from audio FIFO0 to FIFO3.
>> +
>> + ite,rl-channel-swap-audio-sources:
>> + $ref: /schemas/types.yaml#/definitions/uint32-array
>> + minItems: 1
>> + maxItems: 4
>> + uniqueItems: true
>> + items:
>> + enum: [0, 1, 2, 3]
>> + description:
>> + Each array element indicates an audio source whose right channel and left
>> + channel are swapped by this converter. For I2S, the element is the pin
>> + number of an I2S serial data input line. For S/PDIF, the element is always
>> + 0.
>> +
>> + ports:
>> + $ref: /schemas/graph.yaml#/properties/ports
>
> Test your bindings. You need 'additionalProperties: false' here. Though
> I can't remember if that can 'see' properties under the oneOf. So it may
> have to be unevaluatedProperties instead.
Ah, I see the same warnings with your bot after upgrading my local dtschema
to dtschema-2024.9. I should have upgraded it earlier, sorry. Before sending
this patch, I tested it with dtschema-2024.2 and there is no warning.
However, there are still the warnings after adding additionalProperties or
unevaluatedProperties constraint here. With additionalProperties, there are
even some additional errors. Thoughts?
>
>> +
>> + oneOf:
>
> I think you can get rid of this. If port@1 requires the dual link
> properties and then properties on port@0, then the only way you can have
> a single link is removing port@1 from the DT.
If I get rid of this with the below snippet, I see warnings against
the single-link LVDS input example. It looks like the conditions in
"allOf" are still true even if "port@1" is not in that example.
And it seems difficult to disallow people to add "dual-lvds-odd-pixels"
and/or "dual-lvds-even-pixels" properties to "port@0" when there is no
"port@1". This is not an issue if we use the "oneOf" to separate the
single/dual link cases. Any ideas?
-----------------------------8<-----------------------------
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: the first LVDS input link
properties:
dual-lvds-odd-pixels:
type: boolean
description: the first sink port for odd pixels
dual-lvds-even-pixels:
type: boolean
description: the first sink port for even pixels
port@1:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: the second LVDS input link
properties:
dual-lvds-even-pixels:
type: boolean
description: the second sink port for even pixels
dual-lvds-odd-pixels:
type: boolean
description: the second sink port for odd pixels
oneOf:
- required: [dual-lvds-even-pixels]
- required: [dual-lvds-odd-pixels]
port@2:
$ref: /schemas/graph.yaml#/properties/port
description: video port for the HDMI output
port@3:
$ref: /schemas/graph.yaml#/properties/port
description: sound input port
required:
- port@0
- port@2
allOf:
- if:
properties:
port@1:
required:
- dual-lvds-odd-pixels
then:
properties:
port@0:
required:
- dual-lvds-even-pixels
- if:
properties:
port@1:
required:
- dual-lvds-even-pixels
then:
properties:
port@0:
required:
- dual-lvds-odd-pixels
-----------------------------8<-----------------------------
Documentation/devicetree/bindings/display/bridge/ite,it6263.example.dtb: hdmi@4c: ports:port@0: 'dual-lvds-even-pixels' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml#
Documentation/devicetree/bindings/display/bridge/ite,it6263.example.dtb: hdmi@4c: ports:port@0: 'dual-lvds-odd-pixels' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml#
>
>> + - properties:
>> + port@0:
>> + $ref: /schemas/graph.yaml#/properties/port
>> + description: the first LVDS input link
>> +
>> + port@1: false
>> +
>> + port@2:
>> + $ref: /schemas/graph.yaml#/properties/port
>> + description: video port for the HDMI output
>> +
>> + port@3:
>> + $ref: /schemas/graph.yaml#/properties/port
>> + description: sound input port
>> +
>> + required:
>> + - port@0
>> + - port@2
>> +
>> + - properties:
>> + port@0:
>> + $ref: /schemas/graph.yaml#/$defs/port-base
>> + unevaluatedProperties: false
>> + description: the first LVDS input link
>> +
>> + properties:
>> + dual-lvds-odd-pixels:
>> + type: boolean
>> + description: the first sink port for odd pixels
>> +
>> + dual-lvds-even-pixels:
>> + type: boolean
>> + description: the first sink port for even pixels
>> +
>> + oneOf:
>> + - required: [dual-lvds-odd-pixels]
>> + - required: [dual-lvds-even-pixels]
>> +
>> + port@1:
>> + $ref: /schemas/graph.yaml#/$defs/port-base
>> + unevaluatedProperties: false
>> + description: the second LVDS input link
>> +
>> + properties:
>> + dual-lvds-even-pixels:
>> + type: boolean
>> + description: the second sink port for even pixels
>> +
>> + dual-lvds-odd-pixels:
>> + type: boolean
>> + description: the second sink port for odd pixels
>> +
>> + oneOf:
>> + - required: [dual-lvds-even-pixels]
>> + - required: [dual-lvds-odd-pixels]
>> +
>> + port@2:
>> + $ref: /schemas/graph.yaml#/properties/port
>> + description: video port for the HDMI output
>> +
>> + port@3:
>> + $ref: /schemas/graph.yaml#/properties/port
>> + description: sound input port
>> +
>> + required:
>> + - port@0
>> + - port@1
>> + - port@2
>> +
>> + allOf:
>> + - if:
>> + properties:
>> + port@0:
>> + required:
>> + - dual-lvds-odd-pixels
>> + then:
>> + properties:
>> + port@1:
>> + properties:
>> + dual-lvds-odd-pixels: false
>> +
>> + - if:
>> + properties:
>> + port@0:
>> + required:
>> + - dual-lvds-even-pixels
>> + then:
>> + properties:
>> + port@1:
>> + properties:
>> + dual-lvds-even-pixels: false
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - ivdd-supply
>> + - ovdd-supply
>> + - txavcc18-supply
>> + - txavcc33-supply
>> + - pvcc1-supply
>> + - pvcc2-supply
>> + - avcc-supply
>> + - anvdd-supply
>> + - apvdd-supply
>> + - ports
>> +
>> +additionalProperties: false
>> +
--
Regards,
Liu Ying
Powered by blists - more mailing lists