linux-kernel - [PATCH] arm64: dts: ti: k3-j784s4-mcu-wakeup: Configure wkup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <20241009072056.3511346-1-b-kapoor@ti.com>
Date: Wed, 9 Oct 2024 12:50:56 +0530
From: Bhavya Kapoor <b-kapoor@...com>
To: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
CC: <b-kapoor@...com>, <u-kumar1@...com>,
        <linux-arm-kernel@...ts.infradead.org>, <conor+dt@...nel.org>,
        <krzk+dt@...nel.org>, <robh@...nel.org>, <kristo@...nel.org>,
        <vigneshr@...com>, <nm@...com>
Subject: [PATCH] arm64: dts: ti: k3-j784s4-mcu-wakeup: Configure wkup_uart0 with clock settings

This commit adds the assigned-clocks and assigned-clock-parents
properties for wkup_uart0 in J784S4. Specifically, the assigned-clocks
property is set to reference the clock identified by
"wkup_usart_mcupll_bypass_out0", ensuring the UART operates with the
correct clock source.

The assigned-clock-parents property specifies "wkup_usart_clksel_out0"
as the parent clock. This configuration is critical for establishing
the proper clocking hierarchy, enabling the UART device to function
reliably across different baud rates.

Signed-off-by: Bhavya Kapoor <b-kapoor@...com>
---

Rebased to next-20241008

 arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index f603380fc91c..c2aa858c37c2 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -310,6 +310,8 @@ wkup_uart0: serial@...00000 {
 		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&k3_clks 397 0>;
 		clock-names = "fclk";
+		assigned-clocks = <&k3_clks 397 0>;
+		assigned-clock-parents = <&k3_clks 397 1>;
 		power-domains = <&k3_pds 397 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
-- 
2.34.1