[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZwlF4VhRPv6mzURo@lizhi-Precision-Tower-5810>
Date: Fri, 11 Oct 2024 11:36:01 -0400
From: Frank Li <Frank.li@....com>
To: Stefan Eichenberger <eichest@...il.com>
Cc: Francesco Dolcini <francesco@...cini.it>, hongxing.zhu@....com,
l.stach@...gutronix.de, lpieralisi@...nel.org, kw@...ux.com,
manivannan.sadhasivam@...aro.org, robh@...nel.org,
bhelgaas@...gle.com, shawnguo@...nel.org, s.hauer@...gutronix.de,
kernel@...gutronix.de, festevam@...il.com,
francesco.dolcini@...adex.com, linux-pci@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, imx@...ts.linux.dev,
linux-kernel@...r.kernel.org,
Stefan Eichenberger <stefan.eichenberger@...adex.com>
Subject: Re: [PATCH v2] PCI: imx6: Add suspend/resume support for i.MX6QDL
On Fri, Oct 11, 2024 at 04:36:21PM +0200, Stefan Eichenberger wrote:
> Hi Frank,
>
> On Thu, Oct 10, 2024 at 06:45:17PM -0400, Frank Li wrote:
> > On Thu, Oct 10, 2024 at 10:11:21PM +0200, Francesco Dolcini wrote:
> > > Hello Frank,
> > >
> > > On Thu, Oct 10, 2024 at 04:01:21PM -0400, Frank Li wrote:
> > > > On Wed, Oct 09, 2024 at 03:14:05PM +0200, Stefan Eichenberger wrote:
> > > > > From: Stefan Eichenberger <stefan.eichenberger@...adex.com>
> > > > >
> > > > > The suspend/resume support is broken on the i.MX6QDL platform. This
> > > > > patch resets the link upon resuming to recover functionality. It shares
> > > > > most of the sequences with other i.MX devices but does not touch the
> > > > > critical registers, which might break PCIe. This patch addresses the
> > > > > same issue as the following downstream commit:
> > > > > https://github.com/nxp-imx/linux-imx/commit/4e92355e1f79d225ea842511fcfd42b343b32995
> > > > > In comparison this patch will also reset the device if possible. Without
> > > > > this patch suspend/resume will not work if a PCIe device is connected.
> > > > > The kernel will hang on resume and print an error:
> > > > > ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible
> > > > > 8<--- cut here ---
> > > > > Unhandled fault: imprecise external abort (0x1406) at 0x0106f944
> > > > >
> > > > > Signed-off-by: Stefan Eichenberger <stefan.eichenberger@...adex.com>
> > > > > ---
> > > >
> > > > Thank you for your patch.
> > > >
> > > > But it may conflict with another suspend/resume patch
> > > > https://lore.kernel.org/imx/1727245477-15961-8-git-send-email-hongxing.zhu@nxp.com/
> > >
> > > Thanks for the head-up.
> > >
> > > Do you see any issue with this patch apart that? Because this patch is
> > > fixing a crash, so I would expect this to be merged, once ready, and
> > > such a series rebased afterward.
> > >
> > > I am writing this explicitly since you wrote a similar comment on the
> > > v1 (https://lore.kernel.org/all/ZsNXDq%2FkidZdyhvD@lizhi-Precision-Tower-5810/)
> > > and I would like to prevent to have this fix starving for long just because
> > > multiple people is working on the same driver.
> >
> > My key comment for this patch is use flags IMX_PCIE_FLAG_SKIP_TURN_OFF
> > in suspend()/resume(), it is up to kw to pick which one firstly.
>
> I will try to implement it as you proposed with the new flag.
I have not met this problem at arm64 platform. what's your .config?
Frank
>
> However, what I figured out with kernel v6.12-rc1 I get the following
> warning when booting on an i.MX6QDL even without my patch applied:
> [ 1.901199] PCI: bus0: Fast back to back transfers disabled
> [ 1.904754] mmc1: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA
> [ 1.904914] mmc2: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA
> [ 1.910686] pci 0000:01:00.0: [168c:003c] type 00 class 0x028000 PCIe Endpoint
> [ 1.918390] NET: Registered PF_PACKET protocol family
> [ 1.918573] mmc0: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA
> [ 1.924322] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit]
> [ 1.931635] Key type dns_resolver registered
> [ 1.936764] pci 0000:01:00.0: ROM [mem 0x00000000-0x0000ffff pref]
> [ 1.961043] pci 0000:01:00.0: supports D1 D2
> [ 1.961526] Registering SWP/SWPB emulation handler
> [ 1.965601] mmc0: new DDR MMC card at address 0001
> [ 1.976575] mmcblk0: mmc0:0001 Q2J54A 3.59 GiB
> [ 1.979794] Loading compiled-in X.509 certificates
> [ 1.985036] PCI: bus1: Fast back to back transfers disabled
> [ 1.991531] pci 0000:00:00.0: bridge window [mem 0x01000000-0x011fffff]: assigned
> [ 1.998742] mmcblk0: p1 p2 p3
> [ 1.999163] pci 0000:00:00.0: BAR 0 [mem 0x01200000-0x012fffff]: assigned
> [ 2.003947] mmcblk0boot0: mmc0:0001 Q2J54A 16.0 MiB
> [ 2.008990] pci 0000:00:00.0: bridge window [mem 0x01300000-0x013fffff pref]: assigned
> [ 2.009023] pci 0000:00:00.0: ROM [mem 0x01400000-0x0140ffff pref]: assigned
> [ 2.009054] pci 0000:01:00.0: BAR 0 [mem 0x01000000-0x011fffff 64bit]: assigned
> [ 2.017526] mmcblk0boot1: mmc0:0001 Q2J54A 16.0 MiB
> [ 2.022015] pci 0000:01:00.0: ROM [mem 0x01300000-0x0130ffff pref]: assigned
> [ 2.032133] mmcblk0rpmb: mmc0:0001 Q2J54A 512 KiB, chardev (242:0)
> [ 2.036347] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
> [ 2.036370] pci 0000:00:00.0: bridge window [mem 0x01000000-0x011fffff]
> [ 2.036384] pci 0000:00:00.0: bridge window [mem 0x01300000-0x013fffff pref]
> [ 2.042552] pps pps0: new PPS source ptp0
> [ 2.048338] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
> [ 2.083626] pci_bus 0000:00: resource 5 [mem 0x01000000-0x01efffff]
> [ 2.089972] pci_bus 0000:01: resource 1 [mem 0x01000000-0x011fffff]
> [ 2.093461] fec 2188000.ethernet eth0: registered PHC device 0
> [ 2.096283] pci_bus 0000:01: resource 2 [mem 0x01300000-0x013fffff pref]
> [ 2.096352] sysfs: cannot create duplicate filename '/devices/platform/soc/1ffc000.pcie/pci0000:00/0000:00:00.0/resource0'
> [ 2.096365] CPU: 3 UID: 0 PID: 52 Comm: kworker/u19:2 Not tainted 6.12.0-rc1 #54
> [ 2.096381] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
> [ 2.096391] Workqueue: async async_run_entry_fn
> [ 2.103025] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C
> [ 2.108932]
> [ 2.108940] Call trace:
> [ 2.108950] unwind_backtrace from show_stack+0x10/0x14
> [ 2.121391] clk: Disabling unused clocks
> [ 2.127423] show_stack from dump_stack_lvl+0x54/0x68
> [ 2.127451] dump_stack_lvl from sysfs_warn_dup+0x58/0x64
> [ 2.134265] PM: genpd: Disabling unused power domains
> [ 2.138525] sysfs_warn_dup from sysfs_add_bin_file_mode_ns+0xbc/0xcc
> [ 2.138547] sysfs_add_bin_file_mode_ns from sysfs_create_bin_file+0xac/0xb4
> [ 2.149242] ALSA device list:
> [ 2.150647] sysfs_create_bin_file from pci_create_resource_files+0x84/0x148
> [ 2.153183] No soundcards found.
> [ 2.158407] pci_create_resource_files from pci_bus_add_device+0x24/0xe4
> [ 2.211699] pci_bus_add_device from pci_bus_add_devices+0x2c/0x70
> [ 2.217930] pci_bus_add_devices from pci_host_probe+0x7c/0xa4
> [ 2.223806] pci_host_probe from dw_pcie_host_init+0x4ec/0x71c
> [ 2.229682] dw_pcie_host_init from imx_pcie_probe+0x3a8/0x75c
> [ 2.235559] imx_pcie_probe from platform_probe+0x5c/0xb0
> [ 2.241010] platform_probe from really_probe+0xd0/0x3a4
> [ 2.246364] really_probe from __driver_probe_device+0x8c/0x1d4
> [ 2.252321] __driver_probe_device from driver_probe_device+0x30/0xc0
> [ 2.258803] driver_probe_device from __driver_attach_async_helper+0x50/0xd8
> [ 2.265892] __driver_attach_async_helper from async_run_entry_fn+0x30/0x144
> [ 2.272980] async_run_entry_fn from process_one_work+0x154/0x2dc
> [ 2.279115] process_one_work from worker_thread+0x250/0x3f0
> [ 2.284811] worker_thread from kthread+0x110/0x12c
> [ 2.289726] kthread from ret_from_fork+0x14/0x28
> [ 2.294461] Exception stack(0xe6a0dfb0 to 0xe6a0dff8)
> [ 2.299535] dfa0: 00000000 00000000 00000000 00000000
> [ 2.307740] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ 2.315942] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> [ 2.323156] pcieport 0000:00:00.0: PME: Signaling with IRQ 293
> [ 2.329645] pcieport 0000:00:00.0: AER: enabled with IRQ 293
> [ 2.335553] sysfs: cannot create duplicate filename '/devices/platform/soc/1ffc000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/resource0'
> [ 2.347794] CPU: 3 UID: 0 PID: 52 Comm: kworker/u19:2 Not tainted 6.12.0-rc1 #54
> [ 2.355229] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
> [ 2.361779] Workqueue: async async_run_entry_fn
> [ 2.366349] Call trace:
> [ 2.366362] unwind_backtrace from show_stack+0x10/0x14
> [ 2.374183] show_stack from dump_stack_lvl+0x54/0x68
> [ 2.379273] dump_stack_lvl from sysfs_warn_dup+0x58/0x64
> [ 2.384706] sysfs_warn_dup from sysfs_add_bin_file_mode_ns+0xbc/0xcc
> [ 2.391183] sysfs_add_bin_file_mode_ns from sysfs_create_bin_file+0xac/0xb4
> [ 2.398270] sysfs_create_bin_file from pci_create_resource_files+0x84/0x148
> [ 2.405360] pci_create_resource_files from pci_bus_add_device+0x24/0xe4
> [ 2.412113] pci_bus_add_device from pci_bus_add_devices+0x2c/0x70
> [ 2.418334] pci_bus_add_devices from pci_bus_add_devices+0x60/0x70
> [ 2.424642] pci_bus_add_devices from pci_host_probe+0x7c/0xa4
> [ 2.430511] pci_host_probe from dw_pcie_host_init+0x4ec/0x71c
> [ 2.436384] dw_pcie_host_init from imx_pcie_probe+0x3a8/0x75c
> [ 2.442258] imx_pcie_probe from platform_probe+0x5c/0xb0
> [ 2.447704] platform_probe from really_probe+0xd0/0x3a4
> [ 2.453057] really_probe from __driver_probe_device+0x8c/0x1d4
> [ 2.459014] __driver_probe_device from driver_probe_device+0x30/0xc0
> [ 2.465493] driver_probe_device from __driver_attach_async_helper+0x50/0xd8
> [ 2.472580] __driver_attach_async_helper from async_run_entry_fn+0x30/0x144
> [ 2.479666] async_run_entry_fn from process_one_work+0x154/0x2dc
> [ 2.485800] process_one_work from worker_thread+0x250/0x3f0
> [ 2.491494] worker_thread from kthread+0x110/0x12c
> [ 2.496408] kthread from ret_from_fork+0x14/0x28
> [ 2.501140] Exception stack(0xe6a0dfb0 to 0xe6a0dff8)
> [ 2.506214] dfa0: 00000000 00000000 00000000 00000000
> [ 2.514418] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ 2.522620] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
>
> This was not the case with kernel v6.11, do you have an idea where this
> comes from? I did not dig into more detail yet but it looks a bit like a
> regression. The driver still works, it just prints this duplicate
> filename warning.
>
> Regards,
> Stefan
Powered by blists - more mailing lists