lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZwjPjeK3rbpS9K6B@hu-mojha-hyd.qualcomm.com>
Date: Fri, 11 Oct 2024 12:41:09 +0530
From: Mukesh Ojha <quic_mojha@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
CC: Shiraz Hashim <quic_shashim@...cinc.com>, <neil.armstrong@...aro.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Mathieu Poirier
	<mathieu.poirier@...aro.org>,
        Rob Herring <robh@...nel.org>,
        "Krzysztof
 Kozlowski" <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        "Konrad
 Dybcio" <konradybcio@...nel.org>,
        Bartosz Golaszewski
	<bartosz.golaszewski@...aro.org>,
        Manivannan Sadhasivam
	<manivannan.sadhasivam@...aro.org>,
        <linux-arm-msm@...r.kernel.org>, <linux-remoteproc@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge
 support

On Fri, Oct 11, 2024 at 09:23:05AM +0300, Dmitry Baryshkov wrote:
> On Fri, Oct 11, 2024 at 10:35:18AM GMT, Shiraz Hashim wrote:
> > On Thu, Oct 10, 2024 at 08:57:56AM +0200, neil.armstrong@...aro.org wrote:
> > > On 08/10/2024 08:21, Mukesh Ojha wrote:
> > > > On Mon, Oct 07, 2024 at 08:22:39PM +0530, Mukesh Ojha wrote:
> > > > > On Mon, Oct 07, 2024 at 10:05:08AM +0200, neil.armstrong@...aro.org wrote:
> > > > > > On 04/10/2024 23:23, Mukesh Ojha wrote:
> > > > > > > For Qualcomm SoCs runnning with Qualcomm EL2 hypervisor(QHEE), IOMMU
> > > > > > > translation for remote processors is managed by QHEE and if the same SoC
> > > > > > > run under KVM, remoteproc carveout and devmem region should be IOMMU
> > > > > > > mapped from Linux PAS driver before remoteproc is brought up and
> > > > > > > unmapped once it is tear down and apart from this, SHM bridge also need
> > > > > > > to set up to enable memory protection on both remoteproc meta data
> > > > > > > memory as well as for the carveout region.
> > > > > > > 
> > > > > > > Enable the support required to run Qualcomm remoteprocs on non-QHEE
> > > > > > > hypervisors.
> > > > > > > 
> > > > > > > Signed-off-by: Mukesh Ojha <quic_mojha@...cinc.com>
> > > > > > > ---
> > > > > > >    drivers/remoteproc/qcom_q6v5_pas.c | 41 +++++++++++++++++++++++++++++-
> > > > > > >    1 file changed, 40 insertions(+), 1 deletion(-)
> > > > > > > 
> > > > > > > diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
> > > > > > > index ac339145e072..13bd13f1b989 100644
> > > > > > > --- a/drivers/remoteproc/qcom_q6v5_pas.c
> > > > > > > +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> > 
> > <snip>
> > 
> > > > > > > +		struct of_phandle_args args;
> > > > > > > +
> > > > > > > +		ret = of_parse_phandle_with_args(pdev->dev.of_node, "iommus", "#iommu-cells", 0, &args);
> > > > > > > +		if (ret < 0)
> > > > > > > +			return ret;
> > > > > > > +
> > > > > > > +		rproc->has_iommu = true;
> > > > > > > +		adsp->sid = args.args[0];
> > > > > > > +		of_node_put(args.np);
> > > > > > > +		ret = adsp_devmem_init(adsp);
> > > > > > > +		if (ret)
> > > > > > > +			return ret;
> > > > > > 
> > > > > > Why don't you get this table from the firmware like presumably
> > > > > > QHEE does ?
> > > > > 
> > > > > Well, AFAIK, QHEE(EL2) has this information statically present
> > > > > and does not get it from anywhere., but will confirm this
> > > > > twice..
> > > > 
> > > > Double confirmed, device memory region required by remoteproc is
> > > > statically present with QHEE.
> > > 
> > > Right, in this case why those tables can't be embedded in the elf
> > > .resource_table like it's done with qcom_q6v5_adsp.c by calling
> > > rproc_elf_load_rsc_table() and let the remoteproc framework load the
> > > resource table and setup the devmem ssmu_map ?
> > 
> > Mainly for two reasons -
> > 
> > firmware images on platforms where we like to bring additional no-qhee
> > support do not have resource table.
> > 
> > QCOM PAS implementation for secure remoteproc supports single TZ call
> > of auth_and_rest that authenticates and brings remoteproc out of
> > reset. And we don't have provision to authenticate resource table
> > before it is used for devmem/iommu setup.
> 
> So normally TZ / QHEE have the platform-specific resource table? Isn't
> it tied to the firmware binary?

It is not TZ, but QHEE that statically keeps remoteproc resources with it.

-Mukesh

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ