| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <c32622e4a6897378d9df81c8c3eda1bdb9211e0b.1728632052.git.dsimic@manjaro.org>
Date: Fri, 11 Oct 2024 09:40:51 +0200
From: Dragan Simic <dsimic@...jaro.org>
To: linux-rockchip@...ts.infradead.org
Cc: heiko@...ech.de,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org
Subject: [PATCH v2] arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
Following the hierarchical representation of the SoC data that's been already
established in the commit 296602b8e5f7 ("arm64: dts: rockchip: Move RK3399
OPPs to dtsi files for SoC variants"), add new SoC dtsi file for the Rockchip
RK3399S SoC, which is yet another variant of the Rockchip RK3399 SoC.
The only perceivable differences between the RK3399S and the RK3399 are in
the supported CPU DVFS OPPs, which result from the RK3399S being binned for
lower maximum CPU frequencies than the regular RK3399 variant.
The RK3399S variant is used in the Pine64 PinePhone Pro only, [1] whose board
dts file included the necessary adjustments to the CPU DVFS OPPs. This commit
effectively moves those adjustments into the separate RK3399S SoC dtsi file,
following the above-mentioned "encapsulation" approach.
No functional changes are introduced, which was validated by decompiling and
comparing the affected dtb file before and after these changes.
[1] https://wiki.pine64.org/index.php/PinePhone_Pro
Signed-off-by: Dragan Simic <dsimic@...jaro.org>
---
Notes:
Changes in v2:
- Renamed the new RK3399S SoC variant dtsi file to rk3399-s.dtsi,
as suggested by Heiko, [2] which has bothered me too, as a rather
unnecessary file naming inconsistency
- Adjusted the patch description accordingly, by removing the note
about the file naming inconsistency... yay! :)
- Validated the introduced changes again, in the same way
Link to v1: https://lore.kernel.org/linux-rockchip/59c524a9a12465c21e01b779b42749fae148c41d.1728482151.git.dsimic@manjaro.org/T/#u
[2] https://lore.kernel.org/linux-rockchip/46729153.fMDQidcC6G@diego/
.../dts/rockchip/rk3399-pinephone-pro.dts | 23 +---
arch/arm64/boot/dts/rockchip/rk3399-s.dtsi | 123 ++++++++++++++++++
2 files changed, 124 insertions(+), 22 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-s.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index 1a44582a49fb..eee6cfb6de01 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -13,7 +13,7 @@
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
-#include "rk3399.dtsi"
+#include "rk3399-s.dtsi"
/ {
model = "Pine64 PinePhone Pro";
@@ -456,27 +456,6 @@ mpu6500@68 {
};
};
-&cluster0_opp {
- opp04 {
- status = "disabled";
- };
-
- opp05 {
- status = "disabled";
- };
-};
-
-&cluster1_opp {
- opp06 {
- opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <1100000 1100000 1150000>;
- };
-
- opp07 {
- status = "disabled";
- };
-};
-
&io_domains {
bt656-supply = <&vcc1v8_dvp>;
audio-supply = <&vcca1v8_codec>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-s.dtsi
new file mode 100644
index 000000000000..e54f451af9f3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-s.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3399-base.dtsi"
+
+/ {
+ cluster0_opp: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <825000 825000 1250000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <825000 825000 1250000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <850000 850000 1250000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <925000 925000 1250000>;
+ };
+ };
+
+ cluster1_opp: opp-table-1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <825000 825000 1250000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <825000 825000 1250000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <825000 825000 1250000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <875000 875000 1250000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <950000 950000 1250000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1025000 1025000 1250000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1100000 1100000 1150000>;
+ };
+ };
+
+ gpu_opp_table: opp-table-2 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <825000 825000 1150000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <297000000>;
+ opp-microvolt = <825000 825000 1150000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <825000 825000 1150000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <875000 875000 1150000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <925000 925000 1150000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1100000 1100000 1150000>;
+ };
+ };
+};
+
+&cpu_l0 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+ operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+ operating-points-v2 = <&cluster1_opp>;
+};
+
+&gpu {
+ operating-points-v2 = <&gpu_opp_table>;
+};
Powered by blists - more mailing lists