| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241011074619.796580-2-quic_kriskura@quicinc.com>
Date: Fri, 11 Oct 2024 13:16:18 +0530
From: Krishna Kurapati <quic_kriskura@...cinc.com>
To: Krzysztof Kozlowski <krzk+dt@...nel.org>, Rob Herring <robh@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio
<konradybcio@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
"Dmitry
Baryshkov" <dmitry.baryshkov@...aro.org>
CC: <linux-kernel@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <quic_ppratap@...cinc.com>,
<quic_jackp@...cinc.com>, Krishna Kurapati <quic_kriskura@...cinc.com>
Subject: [PATCH v2 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
Add support for USB controllers on QCS8300. The second
controller is only High Speed capable.
Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
---
arch/arm64/boot/dts/qcom/qcs8300.dtsi | 168 ++++++++++++++++++++++++++
1 file changed, 168 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 2c35f96c3f28..4e6ba9f49b95 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -1363,6 +1363,174 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
qcom,remote-pid = <5>;
};
};
+
+ usb_1_hsphy: phy@...4000 {
+ compatible = "qcom,qcs8300-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0x0 0x8904000 0x0 0x400>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2_hsphy: phy@...6000 {
+ compatible = "qcom,qcs8300-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0x0 0x08906000 0x0 0x400>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_qmpphy: phy@...7000 {
+ compatible = "qcom,qcs8300-qmp-usb3-uni-phy";
+ reg = <0x0 0x8907000 0x0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&gcc GCC_USB_CLKREF_EN>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux", "ref", "com_aux", "pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+ reset-names = "phy", "phy_phy";
+
+ power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb3_prim_phy_pipe_clk_src";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_1: usb@...8800 {
+ compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
+ reg = <0x0 0x0a6f8800 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+ interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ wakeup-source;
+
+ status = "disabled";
+
+ usb_1_dwc3: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x0a600000 0x0 0xe000>;
+ interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x80 0x0>;
+ phys = <&usb_1_hsphy>, <&usb_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ };
+ };
+
+ usb_2: usb@...8800 {
+ compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
+ reg = <0x0 0x0a4f8800 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+ <&gcc GCC_USB20_SLEEP_CLK>,
+ <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>;
+
+ interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq";
+
+ power-domains = <&gcc GCC_USB20_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB20_PRIM_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ qcom,select-utmi-as-pipe-clk;
+ wakeup-source;
+
+ status = "disabled";
+
+ usb_2_dwc3: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x0a400000 0x0 0xe000>;
+ interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x20 0x0>;
+ phys = <&usb_2_hsphy>;
+ phy-names = "usb2-phy";
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ };
+ };
};
arch_timer: timer {
--
2.34.1
Powered by blists - more mailing lists