| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241012060332.54ppztpztp37p224@thinkpad> Date: Sat, 12 Oct 2024 11:33:32 +0530 From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org> To: Stefan Eichenberger <eichest@...il.com> Cc: Frank Li <Frank.li@....com>, Francesco Dolcini <francesco@...cini.it>, hongxing.zhu@....com, l.stach@...gutronix.de, lpieralisi@...nel.org, kw@...ux.com, robh@...nel.org, bhelgaas@...gle.com, shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com, francesco.dolcini@...adex.com, linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, imx@...ts.linux.dev, linux-kernel@...r.kernel.org, Stefan Eichenberger <stefan.eichenberger@...adex.com> Subject: Re: [PATCH v2] PCI: imx6: Add suspend/resume support for i.MX6QDL On Fri, Oct 11, 2024 at 04:36:21PM +0200, Stefan Eichenberger wrote: [...] > However, what I figured out with kernel v6.12-rc1 I get the following > warning when booting on an i.MX6QDL even without my patch applied: > [ 1.901199] PCI: bus0: Fast back to back transfers disabled > [ 1.904754] mmc1: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA > [ 1.904914] mmc2: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA > [ 1.910686] pci 0000:01:00.0: [168c:003c] type 00 class 0x028000 PCIe Endpoint > [ 1.918390] NET: Registered PF_PACKET protocol family > [ 1.918573] mmc0: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA > [ 1.924322] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit] > [ 1.931635] Key type dns_resolver registered > [ 1.936764] pci 0000:01:00.0: ROM [mem 0x00000000-0x0000ffff pref] > [ 1.961043] pci 0000:01:00.0: supports D1 D2 > [ 1.961526] Registering SWP/SWPB emulation handler > [ 1.965601] mmc0: new DDR MMC card at address 0001 > [ 1.976575] mmcblk0: mmc0:0001 Q2J54A 3.59 GiB > [ 1.979794] Loading compiled-in X.509 certificates > [ 1.985036] PCI: bus1: Fast back to back transfers disabled > [ 1.991531] pci 0000:00:00.0: bridge window [mem 0x01000000-0x011fffff]: assigned > [ 1.998742] mmcblk0: p1 p2 p3 > [ 1.999163] pci 0000:00:00.0: BAR 0 [mem 0x01200000-0x012fffff]: assigned > [ 2.003947] mmcblk0boot0: mmc0:0001 Q2J54A 16.0 MiB > [ 2.008990] pci 0000:00:00.0: bridge window [mem 0x01300000-0x013fffff pref]: assigned > [ 2.009023] pci 0000:00:00.0: ROM [mem 0x01400000-0x0140ffff pref]: assigned > [ 2.009054] pci 0000:01:00.0: BAR 0 [mem 0x01000000-0x011fffff 64bit]: assigned > [ 2.017526] mmcblk0boot1: mmc0:0001 Q2J54A 16.0 MiB > [ 2.022015] pci 0000:01:00.0: ROM [mem 0x01300000-0x0130ffff pref]: assigned > [ 2.032133] mmcblk0rpmb: mmc0:0001 Q2J54A 512 KiB, chardev (242:0) > [ 2.036347] pci 0000:00:00.0: PCI bridge to [bus 01-ff] > [ 2.036370] pci 0000:00:00.0: bridge window [mem 0x01000000-0x011fffff] > [ 2.036384] pci 0000:00:00.0: bridge window [mem 0x01300000-0x013fffff pref] > [ 2.042552] pps pps0: new PPS source ptp0 > [ 2.048338] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] > [ 2.083626] pci_bus 0000:00: resource 5 [mem 0x01000000-0x01efffff] > [ 2.089972] pci_bus 0000:01: resource 1 [mem 0x01000000-0x011fffff] > [ 2.093461] fec 2188000.ethernet eth0: registered PHC device 0 > [ 2.096283] pci_bus 0000:01: resource 2 [mem 0x01300000-0x013fffff pref] > [ 2.096352] sysfs: cannot create duplicate filename '/devices/platform/soc/1ffc000.pcie/pci0000:00/0000:00:00.0/resource0' > [ 2.096365] CPU: 3 UID: 0 PID: 52 Comm: kworker/u19:2 Not tainted 6.12.0-rc1 #54 > [ 2.096381] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) > [ 2.096391] Workqueue: async async_run_entry_fn > [ 2.103025] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C > [ 2.108932] > [ 2.108940] Call trace: > [ 2.108950] unwind_backtrace from show_stack+0x10/0x14 > [ 2.121391] clk: Disabling unused clocks > [ 2.127423] show_stack from dump_stack_lvl+0x54/0x68 > [ 2.127451] dump_stack_lvl from sysfs_warn_dup+0x58/0x64 > [ 2.134265] PM: genpd: Disabling unused power domains > [ 2.138525] sysfs_warn_dup from sysfs_add_bin_file_mode_ns+0xbc/0xcc > [ 2.138547] sysfs_add_bin_file_mode_ns from sysfs_create_bin_file+0xac/0xb4 > [ 2.149242] ALSA device list: > [ 2.150647] sysfs_create_bin_file from pci_create_resource_files+0x84/0x148 > [ 2.153183] No soundcards found. > [ 2.158407] pci_create_resource_files from pci_bus_add_device+0x24/0xe4 > [ 2.211699] pci_bus_add_device from pci_bus_add_devices+0x2c/0x70 > [ 2.217930] pci_bus_add_devices from pci_host_probe+0x7c/0xa4 > [ 2.223806] pci_host_probe from dw_pcie_host_init+0x4ec/0x71c > [ 2.229682] dw_pcie_host_init from imx_pcie_probe+0x3a8/0x75c > [ 2.235559] imx_pcie_probe from platform_probe+0x5c/0xb0 > [ 2.241010] platform_probe from really_probe+0xd0/0x3a4 > [ 2.246364] really_probe from __driver_probe_device+0x8c/0x1d4 > [ 2.252321] __driver_probe_device from driver_probe_device+0x30/0xc0 > [ 2.258803] driver_probe_device from __driver_attach_async_helper+0x50/0xd8 > [ 2.265892] __driver_attach_async_helper from async_run_entry_fn+0x30/0x144 > [ 2.272980] async_run_entry_fn from process_one_work+0x154/0x2dc > [ 2.279115] process_one_work from worker_thread+0x250/0x3f0 > [ 2.284811] worker_thread from kthread+0x110/0x12c > [ 2.289726] kthread from ret_from_fork+0x14/0x28 > [ 2.294461] Exception stack(0xe6a0dfb0 to 0xe6a0dff8) > [ 2.299535] dfa0: 00000000 00000000 00000000 00000000 > [ 2.307740] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 > [ 2.315942] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 > [ 2.323156] pcieport 0000:00:00.0: PME: Signaling with IRQ 293 > [ 2.329645] pcieport 0000:00:00.0: AER: enabled with IRQ 293 > [ 2.335553] sysfs: cannot create duplicate filename '/devices/platform/soc/1ffc000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/resource0' > [ 2.347794] CPU: 3 UID: 0 PID: 52 Comm: kworker/u19:2 Not tainted 6.12.0-rc1 #54 > [ 2.355229] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) > [ 2.361779] Workqueue: async async_run_entry_fn > [ 2.366349] Call trace: > [ 2.366362] unwind_backtrace from show_stack+0x10/0x14 > [ 2.374183] show_stack from dump_stack_lvl+0x54/0x68 > [ 2.379273] dump_stack_lvl from sysfs_warn_dup+0x58/0x64 > [ 2.384706] sysfs_warn_dup from sysfs_add_bin_file_mode_ns+0xbc/0xcc > [ 2.391183] sysfs_add_bin_file_mode_ns from sysfs_create_bin_file+0xac/0xb4 > [ 2.398270] sysfs_create_bin_file from pci_create_resource_files+0x84/0x148 > [ 2.405360] pci_create_resource_files from pci_bus_add_device+0x24/0xe4 > [ 2.412113] pci_bus_add_device from pci_bus_add_devices+0x2c/0x70 > [ 2.418334] pci_bus_add_devices from pci_bus_add_devices+0x60/0x70 > [ 2.424642] pci_bus_add_devices from pci_host_probe+0x7c/0xa4 > [ 2.430511] pci_host_probe from dw_pcie_host_init+0x4ec/0x71c > [ 2.436384] dw_pcie_host_init from imx_pcie_probe+0x3a8/0x75c > [ 2.442258] imx_pcie_probe from platform_probe+0x5c/0xb0 > [ 2.447704] platform_probe from really_probe+0xd0/0x3a4 > [ 2.453057] really_probe from __driver_probe_device+0x8c/0x1d4 > [ 2.459014] __driver_probe_device from driver_probe_device+0x30/0xc0 > [ 2.465493] driver_probe_device from __driver_attach_async_helper+0x50/0xd8 > [ 2.472580] __driver_attach_async_helper from async_run_entry_fn+0x30/0x144 > [ 2.479666] async_run_entry_fn from process_one_work+0x154/0x2dc > [ 2.485800] process_one_work from worker_thread+0x250/0x3f0 > [ 2.491494] worker_thread from kthread+0x110/0x12c > [ 2.496408] kthread from ret_from_fork+0x14/0x28 > [ 2.501140] Exception stack(0xe6a0dfb0 to 0xe6a0dff8) > [ 2.506214] dfa0: 00000000 00000000 00000000 00000000 > [ 2.514418] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 > [ 2.522620] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 > > This was not the case with kernel v6.11, do you have an idea where this > comes from? I did not dig into more detail yet but it looks a bit like a > regression. The driver still works, it just prints this duplicate > filename warning. Could you please do bisect to find the offending commit? - Mani -- மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists