[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c3546c71-46d9-4999-8e53-8e8babd4bb35@suse.de>
Date: Mon, 14 Oct 2024 18:41:01 +0300
From: Stanimir Varbanov <svarbanov@...e.de>
To: "Rob Herring (Arm)" <robh@...nel.org>,
Stanimir Varbanov <svarbanov@...e.de>
Cc: Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Bjorn Helgaas
<bhelgaas@...gle.com>, linux-pci@...r.kernel.org,
Jonathan Bell <jonathan@...pberrypi.com>, Jim Quinlan
<jim2101024@...il.com>, linux-rpi-kernel@...ts.infradead.org, kw@...ux.com,
Andrea della Porta <andrea.porta@...e.com>, devicetree@...r.kernel.org,
Phil Elwell <phil@...pberrypi.com>, Thomas Gleixner <tglx@...utronix.de>,
Philipp Zabel <p.zabel@...gutronix.de>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Nicolas Saenz Julienne <nsaenz@...nel.org>,
Florian Fainelli <florian.fainelli@...adcom.com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Conor Dooley <conor+dt@...nel.org>
Subject: Re: [PATCH v3 00/11] Add PCIe support for bcm2712
On 10/14/24 17:05, Rob Herring (Arm) wrote:
>
> On Mon, 14 Oct 2024 16:06:59 +0300, Stanimir Varbanov wrote:
>> Hello,
>>
>> Here is v3 the series to add support for PCIe on bcm2712 SoC
>> used by RPi5. Previous v2 can be found at [1].
>>
>> v2 -> v3 changes include:
>> - Added Reviewed-by/Acked-by tags.
>> - MIP MSI-X driver has been converted to MSI parent.
>> - Added a new patch for PHY PLL adjustment need to succesfully
>> enumerate PCIe endpoints on extension connector (tested with
>> Pineboards AI Bundle + NVME SSD adapter card).
>> - Re-introduced brcm,msi-offset DT private property for MIP
>> interrupt-controller (without it I'm anable to use the interrupts
>> of adapter cards on PCIe enxtension connector).
>>
>> For more info check patches.
>>
>> [1] https://patchwork.kernel.org/project/linux-pci/cover/20240910151845.17308-1-svarbanov@suse.de/
>>
>> Stanimir Varbanov (11):
>> dt-bindings: interrupt-controller: Add bcm2712 MSI-X DT bindings
>> dt-bindings: PCI: brcmstb: Update bindings for PCIe on bcm2712
>> irqchip: mip: Add Broadcom bcm2712 MSI-X interrupt controller
>> PCI: brcmstb: Expand inbound size calculation helper
>> PCI: brcmstb: Enable external MSI-X if available
>> PCI: brcmstb: Avoid turn off of bridge reset
>> PCI: brcmstb: Add bcm2712 support
>> PCI: brcmstb: Reuse config structure
>> PCI: brcmstb: Adjust PHY PLL setup to use a 54MHz input refclk
>> arm64: dts: broadcom: bcm2712: Add PCIe DT nodes
>> arm64: dts: broadcom: bcm2712-rpi-5-b: Enable PCIe DT nodes
>>
>> .../brcm,bcm2712-msix.yaml | 60 ++++
>> .../bindings/pci/brcm,stb-pcie.yaml | 5 +-
>> .../boot/dts/broadcom/bcm2712-rpi-5-b.dts | 8 +
>> arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 160 +++++++++
>> drivers/irqchip/Kconfig | 16 +
>> drivers/irqchip/Makefile | 1 +
>> drivers/irqchip/irq-bcm2712-mip.c | 308 ++++++++++++++++++
>> drivers/pci/controller/pcie-brcmstb.c | 197 ++++++++---
>> 8 files changed, 707 insertions(+), 48 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2712-msix.yaml
>> create mode 100644 drivers/irqchip/irq-bcm2712-mip.c
>>
>> --
>> 2.43.0
>>
>>
>>
>
>
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
>
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
>
> pip3 install dtschema --upgrade
>
>
> New warnings running 'make CHECK_DTBS=y broadcom/bcm2712-rpi-5-b.dtb' for 20241014130710.413-1-svarbanov@...e.de:
Sorry about that. I forgot to update brcm,stb-pcie.yaml schema for
number of resets.
~Stan
>
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: resets: [[12, 42], [13]] is too short
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: reset-names:0: 'rescal' was expected
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: reset-names:1: 'bridge' was expected
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: reset-names: ['bridge', 'rescal'] is too short
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: 'msi-controller' is a required property
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: resets: [[12, 43], [13]] is too short
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: reset-names:0: 'rescal' was expected
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: reset-names:1: 'bridge' was expected
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: reset-names: ['bridge', 'rescal'] is too short
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: 'msi-controller' is a required property
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: resets: [[12, 44], [13]] is too short
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: reset-names:0: 'rescal' was expected
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: reset-names:1: 'bridge' was expected
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@...000: reset-names: ['bridge', 'rescal'] is too short
> from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
>
>
>
>
>
Powered by blists - more mailing lists