| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL_Jsq+hpTPCkuXoCF88nyS_D+iFZB5osrt1q04RxffDsY7cXw@mail.gmail.com>
Date: Mon, 14 Oct 2024 12:36:44 -0500
From: Rob Herring <robh@...nel.org>
To: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: chunkuang.hu@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, p.zabel@...gutronix.de, airlied@...il.com,
daniel@...ll.ch, maarten.lankhorst@...ux.intel.com, mripard@...nel.org,
tzimmermann@...e.de, matthias.bgg@...il.com, shawn.sung@...iatek.com,
yu-chang.lee@...iatek.com, ck.hu@...iatek.com, jitao.shi@...iatek.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-mediatek@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, wenst@...omium.org,
kernel@...labora.com, sui.jingfeng@...ux.dev, michael@...le.cc,
sjoerd@...labora.com, Alexandre Mergnat <amergnat@...libre.com>,
Michael Walle <mwalle@...nel.org>
Subject: Re: [PATCH v12 1/3] dt-bindings: display: mediatek: Add OF graph
support for board path
On Mon, Oct 14, 2024 at 3:51 AM AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com> wrote:
>
> The display IPs in MediaTek SoCs support being interconnected with
> different instances of DDP IPs (for example, merge0 or merge1) and/or
> with different DDP IPs (for example, rdma can be connected with either
> color, dpi, dsi, merge, etc), forming a full Display Data Path that
> ends with an actual display.
>
> The final display pipeline is effectively board specific, as it does
> depend on the display that is attached to it, and eventually on the
> sensors supported by the board (for example, Adaptive Ambient Light
> would need an Ambient Light Sensor, otherwise it's pointless!), other
> than the output type.
>
> Add support for OF graphs to most of the MediaTek DDP (display) bindings
> to add flexibility to build custom hardware paths, hence enabling board
> specific configuration of the display pipeline and allowing to finally
> migrate away from using hardcoded paths.
>
> Reviewed-by: Rob Herring (Arm) <robh@...nel.org>
> Reviewed-by: Alexandre Mergnat <amergnat@...libre.com>
> Tested-by: Alexandre Mergnat <amergnat@...libre.com>
> Reviewed-by: CK Hu <ck.hu@...iatek.com>
> Tested-by: Michael Walle <mwalle@...nel.org> # on kontron-sbc-i1200
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
> ---
> .../display/mediatek/mediatek,aal.yaml | 40 +++++++++++++++++++
> .../display/mediatek/mediatek,ccorr.yaml | 21 ++++++++++
> .../display/mediatek/mediatek,color.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,dither.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,dpi.yaml | 25 +++++++++++-
> .../display/mediatek/mediatek,dsc.yaml | 24 +++++++++++
> .../display/mediatek/mediatek,dsi.yaml | 27 ++++++++++++-
> .../display/mediatek/mediatek,ethdr.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,gamma.yaml | 19 +++++++++
> .../display/mediatek/mediatek,merge.yaml | 23 +++++++++++
> .../display/mediatek/mediatek,od.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,ovl-2l.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,ovl.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,postmask.yaml | 21 ++++++++++
> .../display/mediatek/mediatek,rdma.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,ufoe.yaml | 21 ++++++++++
> 16 files changed, 372 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
> index cf24434854ff..47ddba5c41af 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
> @@ -62,6 +62,27 @@ properties:
> $ref: /schemas/types.yaml#/definitions/phandle-array
> maxItems: 1
>
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description:
> + Input and output ports can have multiple endpoints, each of those
> + connects to either the primary, secondary, etc, display pipeline.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: AAL input port
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + AAL output to the next component's input, for example could be one
> + of many gamma, overdrive or other blocks.
> +
> + required:
> + - port@0
> + - port@1
> +
> required:
> - compatible
> - reg
> @@ -89,5 +110,24 @@ examples:
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> clocks = <&mmsys CLK_MM_DISP_AAL>;
> mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + aal0_in: endpoint {
> + remote-endpoint = <&ccorr0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + aal0_out: endpoint {
> + remote-endpoint = <&gamma0_in>;
> + };
> + };
> + };
> };
> };
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
> index 9f8366763831..fca8e7bb0cbc 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
> @@ -57,6 +57,27 @@ properties:
> $ref: /schemas/types.yaml#/definitions/phandle-array
> maxItems: 1
>
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description:
> + Input and output ports can have multiple endpoints, each of those
> + connects to either the primary, secondary, etc, display pipeline.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: CCORR input port
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + CCORR output to the input of the next desired component in the
> + display pipeline, usually only one of the available AAL blocks.
> +
> + required:
> + - port@0
> + - port@1
> +
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
> index 7df786bbad20..6160439ce4d7 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
> @@ -65,6 +65,28 @@ properties:
> $ref: /schemas/types.yaml#/definitions/phandle-array
> maxItems: 1
>
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description:
> + Input and output ports can have multiple endpoints, each of those
> + connects to either the primary, secondary, etc, display pipeline.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: COLOR input port
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + COLOR output to the input of the next desired component in the
> + display pipeline, for example one of the available CCORR or AAL
> + blocks.
> +
> + required:
> + - port@0
> + - port@1
> +
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
> index 6fceb1f95d2a..abaf27916d13 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
> @@ -56,6 +56,28 @@ properties:
> $ref: /schemas/types.yaml#/definitions/phandle-array
> maxItems: 1
>
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description:
> + Input and output ports can have multiple endpoints, each of those
> + connects to either the primary, secondary, etc, display pipeline.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: DITHER input, usually from a POSTMASK or GAMMA block.
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + DITHER output to the input of the next desired component in the
> + display pipeline, for example one of the available DSC compressors,
> + DP_INTF, DSI, LVDS or others.
> +
> + required:
> + - port@0
> + - port@1
> +
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
> index 3a82aec9021c..b567e3d58aa1 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
> @@ -71,13 +71,34 @@ properties:
> Output port node. This port should be connected to the input port of an
> attached HDMI, LVDS or DisplayPort encoder chip.
>
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: DPI input port
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: DPI output to an HDMI, LVDS or DisplayPort encoder input
This is wrong. The existing 'port' is the output. 'port' and 'port@0'
are treated as the same thing. Since you are adding an input port, the
new port has to be 'port@1' (or any number but 0).
I haven't looked at the driver code, but it should request port 0 and
always get the output port. And requesting port 1 will return an error
or the input port.
Rob
Powered by blists - more mailing lists