[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <172888945458.6232.12570065156992505241.b4-ty@linaro.org>
Date: Mon, 14 Oct 2024 09:04:23 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: linus.walleij@...aro.org,
brgl@...ev.pl,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
joel@....id.au,
andrew@...econstruct.com.au,
linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org,
linux-kernel@...r.kernel.org,
BMC-SW@...eedtech.com,
Peter.Yin@...ntatw.com,
Jay_Zhang@...ynn.com,
Billy Tsai <billy_tsai@...eedtech.com>
Cc: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: (subset) [PATCH v7 0/7] Add Aspeed G7 gpio support
From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
On Tue, 08 Oct 2024 16:14:43 +0800, Billy Tsai wrote:
> The Aspeed 7th generation SoC features two GPIO controllers: one with 12
> GPIO pins and another with 216 GPIO pins. The main difference from the
> previous generation is that the control logic has been updated to support
> per-pin control, allowing each pin to have its own 32-bit register for
> configuring value, direction, interrupt type, and more.
> This patch serial also add low-level operations (llops) to abstract the
> register access for GPIO registers and the coprocessor request/release in
> gpio-aspeed.c making it easier to extend the driver to support different
> hardware register layouts.
>
> [...]
Applied, thanks!
[3/7] gpio: aspeed: Change the macro to support deferred probe
commit: f1bc03e7e9bbbb18ad60ad6c6908b16fb7f40545
[4/7] gpio: aspeed: Remove the name for bank array
commit: d787289589202cd449cabed3d7fde84e18fb6dd6
[5/7] gpio: aspeed: Create llops to handle hardware access
commit: 79fc9a2fcc457f4375118fbcdb6767163870b5ff
[6/7] dt-bindings: gpio: aspeed,ast2400-gpio: Support ast2700
commit: bef6959a3746fc8207a0ca75e239c95d7409fd90
[7/7] gpio: aspeed: Support G7 Aspeed gpio controller
commit: b2e861bd1eaf4c5f75139df9b75dade3334a5b6c
Best regards,
--
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Powered by blists - more mailing lists