[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <25dab73e9f2cf859cf3db7f626b6db04c5b3c1a6.camel@md.metrocast.net>
Date: Sun, 13 Oct 2024 22:13:25 -0400
From: Andy Walls <awalls@...metrocast.net>
To: linux@...blig.org, mchehab@...nel.org, linux-media@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] media: cx18: Remove unused cx18_reset_ir_gpio
On Sun, 2024-10-13 at 00:39 +0100, linux@...blig.org wrote:
> From: "Dr. David Alan Gilbert" <linux@...blig.org>
>
> cx18_reset_ir_gpio() has been unused in tree since 2009
> commit eefe1010a465 ("V4L/DVB (10759): cx18: Convert GPIO connected
> functions to act as v4l2_subdevices")
>
> It has a comment saying it's exported for use by 'lirc_pvr150' but I
> don't
> see any sign of it in the lirc git, and I see it removed support
> for lirc_i2c.c 'Flavors of the Hauppage PVR-150...' in 2014.
>
The IR Tx functionality of lirc_zilog (aka lirc_pvr150) used this when
it decided the Zilog 8051 microcontroller and firmware had wedged
itself.
If lirc_zilog is gone from staging and lirc_zilog/lirc_pvr150 is gone
from out of tree LIRC, then I guess there's no current caller of this
function.
Removing it prevents any current or future module from
bringing the IR chip out of a bad/stuck state via software. So that's
the trade off for removing this function.
-Andy
> Remove it.
>
> Signed-off-by: Dr. David Alan Gilbert <linux@...blig.org>
> ---
> drivers/media/pci/cx18/cx18-gpio.c | 15 ---------------
> drivers/media/pci/cx18/cx18-gpio.h | 1 -
> 2 files changed, 16 deletions(-)
>
> diff --git a/drivers/media/pci/cx18/cx18-gpio.c
> b/drivers/media/pci/cx18/cx18-gpio.c
> index c85eb8d25837..485a6cbeb15a 100644
> --- a/drivers/media/pci/cx18/cx18-gpio.c
> +++ b/drivers/media/pci/cx18/cx18-gpio.c
> @@ -305,21 +305,6 @@ int cx18_gpio_register(struct cx18 *cx, u32 hw)
> return v4l2_device_register_subdev(&cx->v4l2_dev, sd);
> }
>
> -void cx18_reset_ir_gpio(void *data)
> -{
> - struct cx18 *cx = to_cx18(data);
> -
> - if (cx->card->gpio_i2c_slave_reset.ir_reset_mask == 0)
> - return;
> -
> - CX18_DEBUG_INFO("Resetting IR microcontroller\n");
> -
> - v4l2_subdev_call(&cx->sd_resetctrl,
> - core, reset, CX18_GPIO_RESET_Z8F0811);
> -}
> -EXPORT_SYMBOL(cx18_reset_ir_gpio);
> -/* This symbol is exported for use by lirc_pvr150 for the IR-blaster
> */
> -
> /* Xceive tuner reset function */
> int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int
> value)
> {
> diff --git a/drivers/media/pci/cx18/cx18-gpio.h
> b/drivers/media/pci/cx18/cx18-gpio.h
> index 0fa4c7ad2286..8d5797dea7f5 100644
> --- a/drivers/media/pci/cx18/cx18-gpio.h
> +++ b/drivers/media/pci/cx18/cx18-gpio.h
> @@ -17,5 +17,4 @@ enum cx18_gpio_reset_type {
> CX18_GPIO_RESET_XC2028 = 2,
> };
>
> -void cx18_reset_ir_gpio(void *data);
> int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int
> value);
Powered by blists - more mailing lists