[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241015-ad7606_add_iio_backend_support-v5-8-654faf1ae08c@baylibre.com>
Date: Tue, 15 Oct 2024 13:56:21 +0000
From: Guillaume Stols <gstols@...libre.com>
To: Uwe Kleine-König <ukleinek@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Jonathan Cameron <jic23@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J. Wysocki" <rafael@...nel.org>, Jonathan Corbet <corbet@....net>
Cc: linux-pwm@...r.kernel.org, linux-kernel@...r.kernel.org,
Michael Hennerich <michael.hennerich@...log.com>,
linux-fbdev@...r.kernel.org, linux-iio@...r.kernel.org,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
aardelean@...libre.com, dlechner@...libre.com, jstephan@...libre.com,
nuno.sa@...log.com, Jonathan Cameron <Jonathan.Cameron@...wei.com>,
Guillaume Stols <gstols@...libre.com>
Subject: [PATCH v5 8/8] iio: adc: ad7606: Disable PWM usage for non backend
version
Since the pwm was introduced before backend, there was a mock use, with
a GPIO emulation. Now that iio backend is introduced, the mock use can
be removed.
Signed-off-by: Guillaume Stols <gstols@...libre.com>
---
drivers/iio/adc/ad7606.c | 28 +++++++++-------------------
1 file changed, 9 insertions(+), 19 deletions(-)
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index 7871552ce5ac..0e830a17fc19 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -470,8 +470,6 @@ static int ad7606_pwm_set_high(struct ad7606_state *st)
cnvst_pwm_state.duty_cycle = cnvst_pwm_state.period;
ret = pwm_apply_might_sleep(st->cnvst_pwm, &cnvst_pwm_state);
- /* sleep 2 µS to let finish the current pulse */
- fsleep(2);
return ret;
}
@@ -486,8 +484,6 @@ static int ad7606_pwm_set_low(struct ad7606_state *st)
cnvst_pwm_state.duty_cycle = 0;
ret = pwm_apply_might_sleep(st->cnvst_pwm, &cnvst_pwm_state);
- /* sleep 2 µS to let finish the current pulse */
- fsleep(2);
return ret;
}
@@ -563,13 +559,7 @@ static irqreturn_t ad7606_trigger_handler(int irq, void *p)
error_ret:
iio_trigger_notify_done(indio_dev->trig);
/* The rising edge of the CONVST signal starts a new conversion. */
- if (st->gpio_convst) {
- gpiod_set_value(st->gpio_convst, 1);
- } else {
- ret = ad7606_pwm_set_high(st)
- if (ret < 0)
- dev_err(st->dev, "Could not set PWM to high.");
- }
+ gpiod_set_value(st->gpio_convst, 1);
return IRQ_HANDLED;
}
@@ -900,10 +890,7 @@ static int ad7606_buffer_postenable(struct iio_dev *indio_dev)
{
struct ad7606_state *st = iio_priv(indio_dev);
- if (st->gpio_convst)
- gpiod_set_value(st->gpio_convst, 1);
- else
- return ad7606_pwm_set_high(st);
+ gpiod_set_value(st->gpio_convst, 1);
return 0;
}
@@ -912,10 +899,7 @@ static int ad7606_buffer_predisable(struct iio_dev *indio_dev)
{
struct ad7606_state *st = iio_priv(indio_dev);
- if (st->gpio_convst)
- gpiod_set_value(st->gpio_convst, 0);
- else
- return ad7606_pwm_set_low(st);
+ gpiod_set_value(st->gpio_convst, 0);
return 0;
}
@@ -1210,6 +1194,12 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
indio_dev->setup_ops = &ad7606_backend_buffer_ops;
} else {
+
+ /* Reserve the PWM use only for backend (force gpio_convst definition) */
+ if (!st->gpio_convst)
+ return dev_err_probe(dev, -EINVAL,
+ "No backend, connect convst to a GPIO");
+
init_completion(&st->completion);
st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
indio_dev->name,
--
2.34.1
Powered by blists - more mailing lists