| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241015182637.955753-21-quic_rajkbhag@quicinc.com>
Date: Tue, 15 Oct 2024 23:56:35 +0530
From: Raj Kumar Bhagat <quic_rajkbhag@...cinc.com>
To: <ath12k@...ts.infradead.org>
CC: <linux-wireless@...r.kernel.org>, Kalle Valo <kvalo@...nel.org>,
"Rob
Herring" <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
"Conor
Dooley" <conor+dt@...nel.org>,
Jeff Johnson <jjohnson@...nel.org>,
"Bjorn
Andersson" <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
Sowmiya Sree Elavalagan
<quic_ssreeela@...cinc.com>,
Raj Kumar Bhagat <quic_rajkbhag@...cinc.com>
Subject: [PATCH v2 20/22] wifi: ath12k: Power up userPD
From: Sowmiya Sree Elavalagan <quic_ssreeela@...cinc.com>
UserPD firmware image is loaded and booted by ath12k driver. Get the userPD
memory region from DTS and load the firmware for userPD from pre-defined
path into io-remapped address of this region. Authenticate this image
using pasid which is a peripheral ID. Set the spawn bit to instruct Q6
to spawn userPD thread. Wait for userPD to spawn which is indicated by
spawn interrupt. Ready interrupt is triggered once the userPD is powered
up completely.
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@...cinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@...cinc.com>
---
drivers/net/wireless/ath/ath12k/ahb.c | 138 ++++++++++++++++++++++++++
drivers/net/wireless/ath/ath12k/ahb.h | 10 +-
2 files changed, 147 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath12k/ahb.c b/drivers/net/wireless/ath/ath12k/ahb.c
index 7b898f01c255..fa3927295c4e 100644
--- a/drivers/net/wireless/ath/ath12k/ahb.c
+++ b/drivers/net/wireless/ath/ath12k/ahb.c
@@ -5,13 +5,17 @@
*/
#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/iommu.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/remoteproc.h>
+#include <linux/soc/qcom/mdt_loader.h>
#include <linux/soc/qcom/smem.h>
#include <linux/soc/qcom/smem_state.h>
#include "ahb.h"
@@ -357,6 +361,139 @@ static void ath12k_ahb_stop(struct ath12k_base *ab)
ath12k_ce_cleanup_pipes(ab);
}
+static int ath12k_ahb_power_up(struct ath12k_base *ab)
+{
+ struct ath12k_ahb *ab_ahb = ath12k_ab_to_ahb(ab);
+ u32 pasid;
+ char fw_name[ATH12K_USERPD_FW_NAME_LEN];
+ char fw2_name[ATH12K_USERPD_FW_NAME_LEN];
+ struct device *dev = ab->dev;
+ const struct firmware *fw, *fw2;
+ struct device_node *fw_mem_node;
+ struct reserved_mem *rmem = NULL;
+ unsigned long time_left;
+ phys_addr_t mem_phys;
+ void *mem_region;
+ size_t mem_size;
+ int ret;
+
+ fw_mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
+ if (fw_mem_node)
+ rmem = of_reserved_mem_lookup(fw_mem_node);
+
+ of_node_put(fw_mem_node);
+
+ if (!rmem) {
+ ath12k_err(ab, "Failed to acquire Q6 memory-region\n");
+ return -EINVAL;
+ }
+
+ mem_phys = rmem->base;
+ mem_size = rmem->size;
+ mem_region = (void *)devm_ioremap_wc(dev, mem_phys, mem_size);
+ if (!mem_region) {
+ ath12k_err(ab, "unable to map memory region: %pa+%pa\n",
+ &rmem->base, &rmem->size);
+ return -ENOMEM;
+ }
+
+ snprintf(fw_name, sizeof(fw_name), "%s/%s/%s%d%s", ATH12K_FW_DIR,
+ ab->hw_params->fw.dir, ATH12K_AHB_FW_PREFIX, ab_ahb->userpd_id,
+ ATH12K_AHB_FW_SUFFIX);
+
+ ret = request_firmware(&fw, fw_name, dev);
+ if (ret < 0) {
+ ath12k_err(ab, "request_firmware failed\n");
+ return ret;
+ }
+
+ ath12k_dbg(ab, ATH12K_DBG_AHB, "Booting fw image %s, size %zd\n", fw_name,
+ fw->size);
+
+ if (!fw->size) {
+ ath12k_err(ab, "Invalid firmware size\n");
+ ret = -EINVAL;
+ goto err_fw;
+ }
+
+ pasid = (u32_encode_bits(ab_ahb->userpd_id, ATH12K_USERPD_ID_MASK)) |
+ ATH12K_AHB_UPD_SWID;
+
+ /* Load FW image to a reserved memory location */
+ ret = qcom_mdt_load(dev, fw, fw_name, pasid, mem_region, mem_phys, mem_size,
+ &mem_phys);
+ if (ret) {
+ ath12k_err(ab, "Failed to load MDT segments: %d\n", ret);
+ goto err_fw;
+ }
+
+ snprintf(fw2_name, sizeof(fw2_name), "%s/%s/%s", ATH12K_FW_DIR,
+ ab->hw_params->fw.dir, ATH12K_AHB_FW2);
+
+ ret = request_firmware(&fw2, fw2_name, dev);
+ if (ret < 0) {
+ ath12k_err(ab, "request_firmware failed\n");
+ goto err_fw;
+ }
+
+ ath12k_dbg(ab, ATH12K_DBG_AHB, "Booting fw image %s, size %zd\n", fw2_name,
+ fw2->size);
+
+ if (!fw2->size) {
+ ath12k_err(ab, "Invalid firmware size\n");
+ ret = -EINVAL;
+ goto err_fw2;
+ }
+
+ ret = qcom_mdt_load_no_init(dev, fw2, fw2_name, pasid, mem_region, mem_phys,
+ mem_size, &mem_phys);
+ if (ret) {
+ ath12k_err(ab, "Failed to load MDT segments: %d\n", ret);
+ goto err_fw2;
+ }
+
+ /* Authenticate FW image using peripheral ID */
+ ret = qcom_scm_pas_auth_and_reset(pasid);
+ if (ret) {
+ ath12k_err(ab, "failed to boot the remote processor %d\n", ret);
+ goto err_fw2;
+ }
+
+ /* Instruct Q6 to spawn userPD thread */
+ ret = qcom_smem_state_update_bits(ab_ahb->spawn_state, BIT(ab_ahb->spawn_bit),
+ BIT(ab_ahb->spawn_bit));
+ if (ret) {
+ ath12k_err(ab, "Failed to update spawn state %d\n", ret);
+ goto err_fw2;
+ }
+
+ time_left = wait_for_completion_timeout(&ab_ahb->userpd_spawned,
+ ATH12K_USERPD_SPAWN_TIMEOUT);
+ if (!time_left) {
+ ath12k_err(ab, "UserPD spawn wait timed out\n");
+ ret = -ETIMEDOUT;
+ goto err_fw2;
+ }
+
+ time_left = wait_for_completion_timeout(&ab_ahb->userpd_ready,
+ ATH12K_USERPD_READY_TIMEOUT);
+ if (!time_left) {
+ ath12k_err(ab, "UserPD ready wait timed out\n");
+ ret = -ETIMEDOUT;
+ goto err_fw2;
+ }
+
+ qcom_smem_state_update_bits(ab_ahb->spawn_state, BIT(ab_ahb->spawn_bit), 0);
+
+ ath12k_info(ab, "UserPD%d is now UP\n", ab_ahb->userpd_id);
+
+err_fw2:
+ release_firmware(fw2);
+err_fw:
+ release_firmware(fw);
+ return ret;
+}
+
static void ath12k_ahb_init_qmi_ce_config(struct ath12k_base *ab)
{
struct ath12k_qmi_ce_cfg *cfg = &ab->qmi.ce_cfg;
@@ -611,6 +748,7 @@ static const struct ath12k_hif_ops ath12k_ahb_hif_ops_ipq5332 = {
.irq_enable = ath12k_ahb_ext_irq_enable,
.irq_disable = ath12k_ahb_ext_irq_disable,
.map_service_to_pipe = ath12k_ahb_map_service_to_pipe,
+ .power_up = ath12k_ahb_power_up,
};
static irqreturn_t ath12k_userpd_irq_handler(int irq, void *data)
diff --git a/drivers/net/wireless/ath/ath12k/ahb.h b/drivers/net/wireless/ath/ath12k/ahb.h
index 0999e2bbe970..0dbbbfd45eab 100644
--- a/drivers/net/wireless/ath/ath12k/ahb.h
+++ b/drivers/net/wireless/ath/ath12k/ahb.h
@@ -19,7 +19,15 @@
#define ATH12K_PCI_IRQ_CE0_OFFSET 3
#define ATH12K_ROOTPD_READY_TIMEOUT (5 * HZ)
#define ATH12K_RPROC_AFTER_POWERUP QCOM_SSR_AFTER_POWERUP
-
+#define ATH12K_AHB_FW_PREFIX "q6_fw"
+#define ATH12K_AHB_FW_SUFFIX ".mdt"
+#define ATH12K_AHB_FW2 "iu_fw.mdt"
+#define ATH12K_AHB_UPD_SWID 0x12
+#define ATH12K_USERPD_SPAWN_TIMEOUT (5 * HZ)
+#define ATH12K_USERPD_READY_TIMEOUT (10 * HZ)
+#define ATH12K_USERPD_STOP_TIMEOUT (5 * HZ)
+#define ATH12K_USERPD_ID_MASK GENMASK(9, 8)
+#define ATH12K_USERPD_FW_NAME_LEN 35
enum ath12k_ahb_smp2p_msg_id {
ATH12K_AHB_POWER_SAVE_ENTER = 1,
ATH12K_AHB_POWER_SAVE_EXIT,
--
2.34.1
Powered by blists - more mailing lists