| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241015210205.963931-6-igor.belwon@mentallysanemainliners.org>
Date: Tue, 15 Oct 2024 23:02:04 +0200
From: Igor Belwon <igor.belwon@...tallysanemainliners.org>
To: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
David Wronek <davidwronek@...il.com>,
Sibi Sankar <quic_sibis@...cinc.com>,
Ivaylo Ivanov <ivo.ivanov.ivanov1@...il.com>
Cc: linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 5/6] arm64: dts: exynos: Add initial support for the Exynos 990 SoC
The Exynos 990 SoC is an ARMv8 mobile SoC found in Samsung Galaxy N/S20
series phones (x1sxxx, c1sxxx). Add minimal support for this SoC,
including:
- All 8 cores via PSCI
- ChipID
- Generic timer.
The devices using this SoC suffer from the same issue as Exynos 8895
caused by the stock Samsung bootloader, as it doesn't configure
CNTFRQ_EL0. Hence it's needed to hardcode the adequate frequency in the
timer node, otherwise the kernel panics.
Signed-off-by: Igor Belwon <igor.belwon@...tallysanemainliners.org>
---
arch/arm64/boot/dts/exynos/exynos990.dtsi | 194 ++++++++++++++++++++++
1 file changed, 194 insertions(+)
create mode 100644 arch/arm64/boot/dts/exynos/exynos990.dtsi
diff --git a/arch/arm64/boot/dts/exynos/exynos990.dtsi b/arch/arm64/boot/dts/exynos/exynos990.dtsi
new file mode 100644
index 000000000000..16fda5fe8163
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Exynos 990 SoC device tree source
+ *
+ * Copyright (c) 2024, Igor Belwon <igor.belwon@...tallysanemainliners.org>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "samsung,exynos990";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ arm-a55-pmu {
+ compatible = "arm,cortex-a55-pmu";
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
+ arm-a76-pmu {
+ compatible = "arm,cortex-a76-pmu";
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-affinity = <&cpu4>,
+ <&cpu5>;
+ };
+
+ /* There's no PMU model for cluster2, which are the Mongoose cores. */
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+
+ core1 {
+ cpu = <&cpu5>;
+ };
+ };
+
+ cluster2 {
+ core0 {
+ cpu = <&cpu6>;
+ };
+
+ core1 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x3>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x4>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x5>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@200 {
+ device_type = "cpu";
+ compatible = "samsung,mongoose-m5";
+ reg = <0x6>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@201 {
+ device_type = "cpu";
+ compatible = "samsung,mongoose-m5";
+ reg = <0x7>;
+ enable-method = "psci";
+ };
+ };
+
+ oscclk: clock-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "oscclk";
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "hvc";
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 0x0 0x20000000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chipid@...00000 {
+ compatible = "samsung,exynos990-chipid",
+ "samsung,exynos850-chipid";
+ reg = <0x10000000 0x100>;
+ };
+
+ gic: interrupt-controller@...01000 {
+ compatible = "arm,gic-400";
+ reg = <0x10101000 0x1000>,
+ <0x10102000 0x1000>,
+ <0x10104000 0x2000>,
+ <0x10106000 0x2000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ #address-cells = <0>;
+ #size-cells = <1>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+
+ /*
+ * Non-updatable, broken stock Samsung bootloader does not
+ * configure CNTFRQ_EL0
+ */
+ clock-frequency = <26000000>;
+ };
+};
--
2.45.2
Powered by blists - more mailing lists