linux-kernel - [PATCH v2 0/2] cpufreq/amd-pstate: Set initial min_freq to lowest_nonlinear

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241016144639.135610-1-Dhananjay.Ugwekar@amd.com>
Date: Wed, 16 Oct 2024 14:46:38 +0000
From: Dhananjay Ugwekar <Dhananjay.Ugwekar@....com>
To: <gautham.shenoy@....com>, <mario.limonciello@....com>,
	<perry.yuan@....com>, <rafael@...nel.org>, <viresh.kumar@...aro.org>
CC: <linux-pm@...r.kernel.org>, <linux-kernel@...r.kernel.org>, "Dhananjay
 Ugwekar" <Dhananjay.Ugwekar@....com>
Subject: [PATCH v2 0/2] cpufreq/amd-pstate: Set initial min_freq to lowest_nonlinear_freq

According to the AMD architectural programmer's manual volume 2 [1], 
in section "17.6.4.1 CPPC_CAPABILITY_1" lowest_nonlinear_perf is described 
as "Reports the most energy efficient performance level (in terms of 
performance per watt). Above this threshold, lower performance levels 
generally result in increased energy efficiency. Reducing performance 
below this threshold does not result in total energy savings for a given 
computation, although it reduces instantaneous power consumption". So 
lowest_nonlinear_perf is the most power efficient performance level, and 
going below that would lead to a worse performance/watt.

Also setting the minimum frequency to lowest_nonlinear_freq (instead of
lowest_freq) allows the CPU to idle at a higher frequency which leads
to more time being spent in a deeper idle state (as trivial idle tasks
are completed sooner). This has shown a power benefit in some systems.
In other systems, power consumption has increased but so has the
throughput/watt.

Our objective here is to update the initial lower frequency limit to 
lowest_nonlinear_freq, while allowing the user to later update the lower 
limit to anywhere between lowest_freq to highest_freq for the platform.

So, set the policy->min to lowest_nonlinear_freq in the ->verify() 
callback, only if the original value is equal to FREQ_QOS_MIN_DEFAULT_VALUE
(i.e. 0). Merge the two identical verify functions while at it.

Link: https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/24593.pdf [1]

Changes from v1:
* Modify the initial min_freq from verify callback, instead of adding a
  new callback in cpufreq_driver struct. (Rafael)

v1 Link: https://lore.kernel.org/linux-pm/20241003083952.3186-1-Dhananjay.Ugwekar@amd.com/

Dhananjay Ugwekar (2):
  cpufreq/amd-pstate: Remove the redundant verify() function
  cpufreq/amd-pstate: Set the initial min_freq to lowest_nonlinear_freq

 drivers/cpufreq/amd-pstate.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

-- 
2.34.1