| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241016-auxadc_thermal-v12-1-c0433e9f61af@chromium.org>
Date: Wed, 16 Oct 2024 05:45:46 +0000
From: Hsin-Te Yuan <yuanhsinte@...omium.org>
To: "Rafael J. Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>, Zhang Rui <rui.zhang@...el.com>,
Lukasz Luba <lukasz.luba@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org,
James Lo <james.lo@...iatek.com>, Michael Kao <michael.kao@...iatek.com>,
Hsin-Yi Wang <hsinyi@...omium.org>, Ben Tseng <ben.tseng@...iatek.com>,
Hsin-Te Yuan <yuanhsinte@...omium.org>
Subject: [PATCH RESEND v12] thermal/drivers/mediatek: add another get_temp
ops for thermal sensors
From: James Lo <james.lo@...iatek.com>
Previously, the driver only supported reading the temperature from all
sensors and returning the maximum value. This updatea adds another
get_temp ops to support reading the temperature from each sensor
separately.
This feature provides the ability to read all thermal sensor values in
the SoC through the node /sys/class/thermal.
Signed-off-by: Michael Kao <michael.kao@...iatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@...omium.org>
Signed-off-by: Ben Tseng <ben.tseng@...iatek.com>
Signed-off-by: James Lo <james.lo@...iatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@...omium.org>
---
Changes in v12:
- Remove unnecessary check and unused variable assignment in mtk_read_sensor_temp.
- Add more about what this patch achieves in the commit message.
- Link to v11: https://lore.kernel.org/r/20240809-auxadc_thermal-v11-1-af36cc74f3a3@chromium.org
Changes in V11:
- Rebase on kernel v6.11-rc2
- Use mtk_thermal_temp_is_valid in mtk_read_sensor_temp just like
mtk_thermal_bank_temperature
- Change the error handling of devm_thermal_of_zone_register return
value
- link to V10: https://lore.kernel.org/lkml/20220519101044.16765-1-james.lo@mediatek.com/
Changes in V10:
- Rebase to kernel-v5.18-rc7
- Resend
Changes in V9:
- Rebase to kernel-v5.14-rc1
- Bind raw_to_mcelsius_v1 or raw_to_mcelsius_v2 to compatible
data of struct mtk_thermal_data
- Remove duplicate struct 'mtk_thermal_bank'
- Remove unnecessary if condition check
- Return error if any thermal zone fail to register
Changes in V8:
- Rebase to kernel-v5.13-rc1
- Resend
Changes in v7:
- Fix build error in v6.
Changes in v6:
- Rebase to kernel-5.11-rc1.
- [1/3]
- add interrupts property.
- [2/3]
- add the Tested-by in the commit message.
- [3/3]
- use the mt->conf->msr[id] instead of conf->msr[id] in the
_get_sensor_temp and mtk_thermal_bank_temperature.
- remove the redundant space in _get_sensor_temp and
mtk_read_sensor_temp.
- change kmalloc to dev_kmalloc in mtk_thermal_probe.
Changes in v5:
- Rebase to kernel-5.9-rc1.
- Revise the title of cover letter.
- Drop "[v4,7/7] thermal: mediatek: use spinlock to protect PTPCORESEL"
- [2/2]
- Add the judgement to the version of raw_to_mcelsius.
Changes in v4:
- Rebase to kernel-5.6-rc1.
- [1/7]
- Squash thermal zone settings in the dtsi from [v3,5/8]
arm64: dts: mt8183: Increase polling frequency for CPU thermal zone.
- Remove the property of interrupts and mediatek,hw-reset-temp.
- [2/7]
- Correct commit message.
- [4/7]
- Change the target temperature to the 80C and change the commit message.
- [6/7]
- Adjust newline alignment.
- Fix the judgement on the return value of registering thermal zone.
Changes in v3:
- Rebase to kernel-5.5-rc1.
- [1/8]
- Update sustainable power of cpu, tzts1~5 and tztsABB.
- [7/8]
- Bypass the failure that non cpu_thermal sensor is not find in thermal-zones
in dts, which is normal for mt8173, so prompt a warning here instead of
failing.
Return -EAGAIN instead of -EACCESS on the first read of sensor that
often are bogus values. This can avoid following warning on boot:
thermal thermal_zone6: failed to read out thermal zone (-13)
Changes in v2:
- [1/8]
- Add the sustainable-power,trips,cooling-maps to the tzts1~tztsABB.
- [4/8]
- Add the min opp of cpu throttle.
---
---
drivers/thermal/mediatek/auxadc_thermal.c | 70 +++++++++++++++++++++++++++----
1 file changed, 62 insertions(+), 8 deletions(-)
diff --git a/drivers/thermal/mediatek/auxadc_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
index 9ee2e7283435acfcbb1a956303b6122a08affecc..10938be2e5545fba2fff7d5cc5a0269d42e5d44d 100644
--- a/drivers/thermal/mediatek/auxadc_thermal.c
+++ b/drivers/thermal/mediatek/auxadc_thermal.c
@@ -847,7 +847,8 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
{
- struct mtk_thermal *mt = thermal_zone_device_priv(tz);
+ struct mtk_thermal_bank *bank = thermal_zone_device_priv(tz);
+ struct mtk_thermal *mt = bank->mt;
int i;
int tempmax = INT_MIN;
@@ -866,10 +867,41 @@ static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
return 0;
}
+static int mtk_read_sensor_temp(struct thermal_zone_device *tz, int *temperature)
+{
+ struct mtk_thermal_bank *bank = thermal_zone_device_priv(tz);
+ struct mtk_thermal *mt = bank->mt;
+ const struct mtk_thermal_data *conf = mt->conf;
+ int id = bank->id - 1;
+ int temp = INT_MIN;
+ u32 raw;
+
+ raw = readl(mt->thermal_base + conf->msr[id]);
+
+ temp = mt->raw_to_mcelsius(mt, id, raw);
+
+ /*
+ * The first read of a sensor often contains very high bogus
+ * temperature value. Filter these out so that the system does
+ * not immediately shut down.
+ */
+
+ if (unlikely(!mtk_thermal_temp_is_valid(temp)))
+ return -EAGAIN;
+
+ *temperature = temp;
+
+ return 0;
+}
+
static const struct thermal_zone_device_ops mtk_thermal_ops = {
.get_temp = mtk_read_temp,
};
+static const struct thermal_zone_device_ops mtk_thermal_sensor_ops = {
+ .get_temp = mtk_read_sensor_temp,
+};
+
static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
u32 apmixed_phys_base, u32 auxadc_phys_base,
int ctrl_id)
@@ -1199,6 +1231,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
u64 auxadc_phys_base, apmixed_phys_base;
struct thermal_zone_device *tzdev;
void __iomem *apmixed_base, *auxadc_base;
+ struct mtk_thermal_bank *tz;
mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
if (!mt)
@@ -1285,14 +1318,35 @@ static int mtk_thermal_probe(struct platform_device *pdev)
mtk_thermal_init_bank(mt, i, apmixed_phys_base,
auxadc_phys_base, ctrl_id);
- tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
- &mtk_thermal_ops);
- if (IS_ERR(tzdev))
- return PTR_ERR(tzdev);
+ for (i = 0; i <= mt->conf->num_sensors; i++) {
+ tz = devm_kmalloc(&pdev->dev, sizeof(*tz), GFP_KERNEL);
+ if (!tz)
+ return -ENOMEM;
+
+ tz->mt = mt;
+ tz->id = i;
+
+ tzdev = devm_thermal_of_zone_register(&pdev->dev, i,
+ tz, (i == 0) ?
+ &mtk_thermal_ops
+ : &mtk_thermal_sensor_ops);
+
+ if (IS_ERR(tzdev)) {
+ ret = PTR_ERR(tzdev);
+ if (ret == -ENODEV) {
+ dev_warn(&pdev->dev, "can't find thermal sensor %d\n", i);
+ continue;
+ }
+ dev_err(&pdev->dev,
+ "Error: Failed to register thermal zone %d, ret = %d\n",
+ i, ret);
+ return ret;
+ }
- ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
- if (ret)
- dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
+ ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
+ if (ret)
+ dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs: %d\n", ret);
+ }
return 0;
}
---
base-commit: b589839414be04b2b37e4bf6f84af576c99faf64
change-id: 20240809-auxadc_thermal-9be338ec8b1c
Best regards,
--
Hsin-Te Yuan <yuanhsinte@...omium.org>
Powered by blists - more mailing lists