linux-kernel - [PATCH v6 03/10] drm/bridge: it6505: add AUX operation for HDCP KSV list read

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241016-upstream-v6-v6-3-4d93a0c46de1@ite.com.tw>
Date: Wed, 16 Oct 2024 15:54:15 +0800
From: Hermes Wu via B4 Relay <devnull+Hermes.wu.ite.com.tw@...nel.org>
To: Andrzej Hajda <andrzej.hajda@...el.com>, 
 Neil Armstrong <neil.armstrong@...aro.org>, Robert Foss <rfoss@...nel.org>, 
 Laurent Pinchart <Laurent.pinchart@...asonboard.com>, 
 Jonas Karlman <jonas@...boo.se>, Jernej Skrabec <jernej.skrabec@...il.com>, 
 Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, 
 Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>, 
 David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>, 
 AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>, 
 Pin-yen Lin <treapking@...omium.org>
Cc: dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org, 
 Kenneth Hung <Kenneth.hung@....com.tw>, Pet Weng <Pet.Weng@....com.tw>, 
 Hermes Wu <Hermes.wu@....com.tw>
Subject: [PATCH v6 03/10] drm/bridge: it6505: add AUX operation for HDCP
 KSV list read

From: Hermes Wu <Hermes.wu@....com.tw>

HDCP KSV list readback can choose to use AUX FIFO or
general data register.
For some DisplayPort devices, the KSV list must be read
in 5 byte boundaries.
The original AUX read command does not support these devices.

The AUX command operation control register "REG_AUX_CMD_REQ" uses b[3:0]
as AUX operacion control, and b[7:4] are status bits and read only.
To change KSV read operation uses "CMD_AUX_NATIVE_READ" from using
the data registers to using AUX FIFO.
The extended command "CMD_AUX_GET_KSV_LIST" is added as
"CMD_AUX_NATIVE_READ" with the 0x10 flag which selects AUX FIFO mode.

Signed-off-by: Hermes Wu <Hermes.wu@....com.tw>
---
 drivers/gpu/drm/bridge/ite-it6505.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 9747d7ccf435d536da55c6a3ff79e504b7c724f0..4e6ec1695ae45111d06026d7548d108fac9e5219 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -126,6 +126,7 @@
 #define REG_AUX_OUT_DATA0 0x27
 
 #define REG_AUX_CMD_REQ 0x2B
+#define M_AUX_REQ_CMD 0x0F
 #define AUX_BUSY BIT(5)
 
 #define REG_AUX_DATA_0_7 0x2C
@@ -324,6 +325,9 @@ enum aux_cmd_type {
 	CMD_AUX_NATIVE_READ = 0x0,
 	CMD_AUX_NATIVE_WRITE = 0x5,
 	CMD_AUX_I2C_EDID_READ = 0xB,
+
+	/* KSV read with AUX FIFO extend from CMD_AUX_NATIVE_READ*/
+	CMD_AUX_GET_KSV_LIST = 0x10,
 };
 
 enum aux_cmd_reply {
@@ -965,7 +969,8 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
 	it6505_set_bits(it6505, REG_AUX_CTRL, AUX_USER_MODE, AUX_USER_MODE);
 
 aux_op_start:
-	if (cmd == CMD_AUX_I2C_EDID_READ) {
+	/* HW AUX FIFO supports only EDID and DCPD KSV FIFO area */
+	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
 		/* AUX EDID FIFO has max length of AUX_FIFO_MAX_SIZE bytes. */
 		size = min_t(size_t, size, AUX_FIFO_MAX_SIZE);
 		/* Enable AUX FIFO read back and clear FIFO */
@@ -996,7 +1001,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
 				  size);
 
 	/* Aux Fire */
-	it6505_write(it6505, REG_AUX_CMD_REQ, cmd);
+	it6505_write(it6505, REG_AUX_CMD_REQ, FIELD_GET(M_AUX_REQ_CMD, cmd));
 
 	ret = it6505_aux_wait(it6505);
 	if (ret < 0)
@@ -1030,7 +1035,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
 		goto aux_op_start;
 	}
 
-	if (cmd == CMD_AUX_I2C_EDID_READ) {
+	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
 		for (i = 0; i < size; i++) {
 			ret = it6505_read(it6505, REG_AUX_DATA_FIFO);
 			if (ret < 0)
@@ -1055,7 +1060,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
 	ret = i;
 
 aux_op_err:
-	if (cmd == CMD_AUX_I2C_EDID_READ) {
+	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
 		/* clear AUX FIFO */
 		it6505_set_bits(it6505, REG_AUX_CTRL,
 				AUX_EN_FIFO_READ | CLR_EDID_FIFO,
@@ -1076,7 +1081,8 @@ static ssize_t it6505_aux_do_transfer(struct it6505 *it6505,
 				      size_t size, enum aux_cmd_reply *reply)
 {
 	int i, ret_size, ret = 0, request_size;
-	int fifo_max_size = (cmd == CMD_AUX_I2C_EDID_READ) ? AUX_FIFO_MAX_SIZE : 4;
+	int fifo_max_size = (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) ?
+						 AUX_FIFO_MAX_SIZE : 4;
 
 	mutex_lock(&it6505->aux_lock);
 	i = 0;

-- 
2.34.1