[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Zw+SG3QKITR4TCRw@BLRRASHENOY1.amd.com>
Date: Wed, 16 Oct 2024 15:44:51 +0530
From: "Gautham R. Shenoy" <gautham.shenoy@....com>
To: Mario Limonciello <mario.limonciello@....com>
Cc: Perry Yuan <perry.yuan@....com>, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org,
Dhananjay Ugwekar <Dhananjay.Ugwekar@....com>
Subject: Re: [PATCH 3/4] cpufreq/amd-pstate: Use
amd_pstate_update_min_max_limit() for EPP limits
Hello Mario,
On Sat, Oct 12, 2024 at 12:45:18PM -0500, Mario Limonciello wrote:
> When the EPP updates are set the maximum capable frequency for the
> CPU is used to set the upper limit instead of that of the policy.
>
> Adjust amd_pstate_epp_update_limit() to reuse policy calculation code
> from amd_pstate_update_min_max_limit().
>
> Signed-off-by: Mario Limonciello <mario.limonciello@....com>
Looks good to me.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@....com>
--
Thanks and Regards
gautham.
> ---
> drivers/cpufreq/amd-pstate.c | 19 +++----------------
> 1 file changed, 3 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index 13dec8b1e7a8..8d2541f2c74b 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -1485,26 +1485,13 @@ static void amd_pstate_epp_cpu_exit(struct cpufreq_policy *policy)
> static int amd_pstate_epp_update_limit(struct cpufreq_policy *policy)
> {
> struct amd_cpudata *cpudata = policy->driver_data;
> - u32 max_perf, min_perf, min_limit_perf, max_limit_perf;
> + u32 max_perf, min_perf;
> u64 value;
> s16 epp;
>
> - if (cpudata->boost_supported && !policy->boost_enabled)
> - max_perf = READ_ONCE(cpudata->nominal_perf);
> - else
> - max_perf = READ_ONCE(cpudata->highest_perf);
> + max_perf = READ_ONCE(cpudata->highest_perf);
> min_perf = READ_ONCE(cpudata->lowest_perf);
> - max_limit_perf = div_u64(policy->max * max_perf, policy->cpuinfo.max_freq);
> - min_limit_perf = div_u64(policy->min * max_perf, policy->cpuinfo.max_freq);
> -
> - if (min_limit_perf < min_perf)
> - min_limit_perf = min_perf;
> -
> - if (max_limit_perf < min_limit_perf)
> - max_limit_perf = min_limit_perf;
> -
> - WRITE_ONCE(cpudata->max_limit_perf, max_limit_perf);
> - WRITE_ONCE(cpudata->min_limit_perf, min_limit_perf);
> + amd_pstate_update_min_max_limit(policy);
>
> max_perf = clamp_t(unsigned long, max_perf, cpudata->min_limit_perf,
> cpudata->max_limit_perf);
> --
> 2.43.0
>
Powered by blists - more mailing lists