| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZxE90Tk3/37hOlUM@lizhi-Precision-Tower-5810>
Date: Thu, 17 Oct 2024 12:39:45 -0400
From: Frank Li <Frank.li@....com>
To: Wei Fang <wei.fang@....com>
Cc: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, vladimir.oltean@....com,
claudiu.manoil@....com, xiaoning.wang@....com,
christophe.leroy@...roup.eu, linux@...linux.org.uk,
bhelgaas@...gle.com, horms@...nel.org, imx@...ts.linux.dev,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org
Subject: Re: [PATCH v3 net-next 06/13] net: enetc: build enetc_pf_common.c as
a separate module
On Thu, Oct 17, 2024 at 03:46:30PM +0800, Wei Fang wrote:
> Compile enetc_pf_common.c as a standalone module to allow shared usage
> between ENETC v1 and v4 PF drivers. Add struct enetc_pf_ops to register
> different hardware operation interfaces for both ENETC v1 and v4 PF
> drivers.
>
> Signed-off-by: Wei Fang <wei.fang@....com>
> ---
> v2 changes:
> This patch is separated from v1 patch 5 ("net: enetc: add enetc-pf-common
> driver support"), only the changes to compile enetc_pf_common.c into a
> separated driver are kept.
> v3 changes:
> Refactor the commit message.
> ---
> drivers/net/ethernet/freescale/enetc/Kconfig | 9 ++++
> drivers/net/ethernet/freescale/enetc/Makefile | 5 +-
> .../net/ethernet/freescale/enetc/enetc_pf.c | 26 ++++++++--
> .../net/ethernet/freescale/enetc/enetc_pf.h | 21 ++++++--
> .../freescale/enetc/enetc_pf_common.c | 50 ++++++++++++++++---
> 5 files changed, 96 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/enetc/Kconfig b/drivers/net/ethernet/freescale/enetc/Kconfig
> index 51d80ea959d4..fdd3ecbd1dbf 100644
> --- a/drivers/net/ethernet/freescale/enetc/Kconfig
> +++ b/drivers/net/ethernet/freescale/enetc/Kconfig
> @@ -7,6 +7,14 @@ config FSL_ENETC_CORE
>
> If compiled as module (M), the module name is fsl-enetc-core.
>
> +config NXP_ENETC_PF_COMMON
> + tristate "ENETC PF common functionality driver"
> + help
> + This module supports common functionality between drivers of
> + different versions of NXP ENETC PF controllers.
> +
> + If compiled as module (M), the module name is nxp-enetc-pf-common.
> +
> config FSL_ENETC
> tristate "ENETC PF driver"
> depends on PCI_MSI
> @@ -14,6 +22,7 @@ config FSL_ENETC
> select FSL_ENETC_CORE
> select FSL_ENETC_IERB
> select FSL_ENETC_MDIO
> + select NXP_ENETC_PF_COMMON
> select PHYLINK
> select PCS_LYNX
> select DIMLIB
> diff --git a/drivers/net/ethernet/freescale/enetc/Makefile b/drivers/net/ethernet/freescale/enetc/Makefile
> index 39675e9ff39d..b81ca462e358 100644
> --- a/drivers/net/ethernet/freescale/enetc/Makefile
> +++ b/drivers/net/ethernet/freescale/enetc/Makefile
> @@ -3,8 +3,11 @@
> obj-$(CONFIG_FSL_ENETC_CORE) += fsl-enetc-core.o
> fsl-enetc-core-y := enetc.o enetc_cbdr.o enetc_ethtool.o
>
> +obj-$(CONFIG_NXP_ENETC_PF_COMMON) += nxp-enetc-pf-common.o
> +nxp-enetc-pf-common-y := enetc_pf_common.o
> +
> obj-$(CONFIG_FSL_ENETC) += fsl-enetc.o
> -fsl-enetc-y := enetc_pf.o enetc_pf_common.o
> +fsl-enetc-y := enetc_pf.o
> fsl-enetc-$(CONFIG_PCI_IOV) += enetc_msg.o
> fsl-enetc-$(CONFIG_FSL_ENETC_QOS) += enetc_qos.o
>
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> index 3cdd149056f9..7522316ddfea 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> @@ -11,7 +11,7 @@
>
> #define ENETC_DRV_NAME_STR "ENETC PF driver"
>
> -void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr)
> +static void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr)
> {
> u32 upper = __raw_readl(hw->port + ENETC_PSIPMAR0(si));
> u16 lower = __raw_readw(hw->port + ENETC_PSIPMAR1(si));
> @@ -20,8 +20,8 @@ void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr)
> put_unaligned_le16(lower, addr + 4);
> }
>
> -void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si,
> - const u8 *addr)
> +static void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si,
> + const u8 *addr)
> {
> u32 upper = get_unaligned_le32(addr);
> u16 lower = get_unaligned_le16(addr + 4);
> @@ -30,6 +30,17 @@ void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si,
> __raw_writew(lower, hw->port + ENETC_PSIPMAR1(si));
> }
>
> +static struct phylink_pcs *enetc_pf_create_pcs(struct enetc_pf *pf,
> + struct mii_bus *bus)
> +{
> + return lynx_pcs_create_mdiodev(bus, 0);
> +}
> +
> +static void enetc_pf_destroy_pcs(struct phylink_pcs *pcs)
> +{
> + lynx_pcs_destroy(pcs);
> +}
> +
> static void enetc_set_vlan_promisc(struct enetc_hw *hw, char si_map)
> {
> u32 val = enetc_port_rd(hw, ENETC_PSIPVMR);
> @@ -970,6 +981,14 @@ static void enetc_psi_destroy(struct pci_dev *pdev)
> enetc_pci_remove(pdev);
> }
>
> +static const struct enetc_pf_ops enetc_pf_ops = {
> + .set_si_primary_mac = enetc_pf_set_primary_mac_addr,
> + .get_si_primary_mac = enetc_pf_get_primary_mac_addr,
> + .create_pcs = enetc_pf_create_pcs,
> + .destroy_pcs = enetc_pf_destroy_pcs,
> + .enable_psfp = enetc_psfp_enable,
> +};
> +
> static int enetc_pf_probe(struct pci_dev *pdev,
> const struct pci_device_id *ent)
> {
> @@ -997,6 +1016,7 @@ static int enetc_pf_probe(struct pci_dev *pdev,
> pf = enetc_si_priv(si);
> pf->si = si;
> pf->total_vfs = pci_sriov_get_totalvfs(pdev);
> + enetc_pf_ops_register(pf, &enetc_pf_ops);
>
> err = enetc_setup_mac_addresses(node, pf);
> if (err)
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
> index 92a26b09cf57..39db9d5c2e50 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
> @@ -28,6 +28,16 @@ struct enetc_vf_state {
> enum enetc_vf_flags flags;
> };
>
> +struct enetc_pf;
> +
> +struct enetc_pf_ops {
> + void (*set_si_primary_mac)(struct enetc_hw *hw, int si, const u8 *addr);
> + void (*get_si_primary_mac)(struct enetc_hw *hw, int si, u8 *addr);
Is it possible get_si_primary_mac() return failure?
Frank
> + struct phylink_pcs *(*create_pcs)(struct enetc_pf *pf, struct mii_bus *bus);
> + void (*destroy_pcs)(struct phylink_pcs *pcs);
> + int (*enable_psfp)(struct enetc_ndev_priv *priv);
> +};
> +
> struct enetc_pf {
> struct enetc_si *si;
> int num_vfs; /* number of active VFs, after sriov_init */
> @@ -50,6 +60,8 @@ struct enetc_pf {
>
> phy_interface_t if_mode;
> struct phylink_config phylink_config;
> +
> + const struct enetc_pf_ops *ops;
> };
>
> #define phylink_to_enetc_pf(config) \
> @@ -59,9 +71,6 @@ int enetc_msg_psi_init(struct enetc_pf *pf);
> void enetc_msg_psi_free(struct enetc_pf *pf);
> void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int mbox_id, u16 *status);
>
> -void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr);
> -void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si,
> - const u8 *addr);
> int enetc_pf_set_mac_addr(struct net_device *ndev, void *addr);
> int enetc_setup_mac_addresses(struct device_node *np, struct enetc_pf *pf);
> void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
> @@ -71,3 +80,9 @@ void enetc_mdiobus_destroy(struct enetc_pf *pf);
> int enetc_phylink_create(struct enetc_ndev_priv *priv, struct device_node *node,
> const struct phylink_mac_ops *ops);
> void enetc_phylink_destroy(struct enetc_ndev_priv *priv);
> +
> +static inline void enetc_pf_ops_register(struct enetc_pf *pf,
> + const struct enetc_pf_ops *ops)
> +{
> + pf->ops = ops;
> +}
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
> index bce81a4f6f88..94690ed92e3f 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
> @@ -8,19 +8,37 @@
>
> #include "enetc_pf.h"
>
> +static int enetc_set_si_hw_addr(struct enetc_pf *pf, int si, u8 *mac_addr)
> +{
> + struct enetc_hw *hw = &pf->si->hw;
> +
> + if (pf->ops->set_si_primary_mac)
> + pf->ops->set_si_primary_mac(hw, si, mac_addr);
> + else
> + return -EOPNOTSUPP;
> +
> + return 0;
> +}
> +
> int enetc_pf_set_mac_addr(struct net_device *ndev, void *addr)
> {
> struct enetc_ndev_priv *priv = netdev_priv(ndev);
> + struct enetc_pf *pf = enetc_si_priv(priv->si);
> struct sockaddr *saddr = addr;
> + int err;
>
> if (!is_valid_ether_addr(saddr->sa_data))
> return -EADDRNOTAVAIL;
>
> + err = enetc_set_si_hw_addr(pf, 0, saddr->sa_data);
> + if (err)
> + return err;
> +
> eth_hw_addr_set(ndev, saddr->sa_data);
> - enetc_pf_set_primary_mac_addr(&priv->si->hw, 0, saddr->sa_data);
>
> return 0;
> }
> +EXPORT_SYMBOL_GPL(enetc_pf_set_mac_addr);
>
> static int enetc_setup_mac_address(struct device_node *np, struct enetc_pf *pf,
> int si)
> @@ -38,8 +56,8 @@ static int enetc_setup_mac_address(struct device_node *np, struct enetc_pf *pf,
> }
>
> /* (2) bootloader supplied MAC address */
> - if (is_zero_ether_addr(mac_addr))
> - enetc_pf_get_primary_mac_addr(hw, si, mac_addr);
> + if (is_zero_ether_addr(mac_addr) && pf->ops->get_si_primary_mac)
> + pf->ops->get_si_primary_mac(hw, si, mac_addr);
>
> /* (3) choose a random one */
> if (is_zero_ether_addr(mac_addr)) {
> @@ -48,7 +66,9 @@ static int enetc_setup_mac_address(struct device_node *np, struct enetc_pf *pf,
> si, mac_addr);
> }
>
> - enetc_pf_set_primary_mac_addr(hw, si, mac_addr);
> + err = enetc_set_si_hw_addr(pf, si, mac_addr);
> + if (err)
> + return err;
>
> return 0;
> }
> @@ -70,11 +90,13 @@ int enetc_setup_mac_addresses(struct device_node *np, struct enetc_pf *pf)
>
> return 0;
> }
> +EXPORT_SYMBOL_GPL(enetc_setup_mac_addresses);
>
> void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
> const struct net_device_ops *ndev_ops)
> {
> struct enetc_ndev_priv *priv = netdev_priv(ndev);
> + struct enetc_pf *pf = enetc_si_priv(si);
>
> SET_NETDEV_DEV(ndev, &si->pdev->dev);
> priv->ndev = ndev;
> @@ -107,7 +129,8 @@ void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
> NETDEV_XDP_ACT_NDO_XMIT | NETDEV_XDP_ACT_RX_SG |
> NETDEV_XDP_ACT_NDO_XMIT_SG;
>
> - if (si->hw_features & ENETC_SI_F_PSFP && !enetc_psfp_enable(priv)) {
> + if (si->hw_features & ENETC_SI_F_PSFP && pf->ops->enable_psfp &&
> + !pf->ops->enable_psfp(priv)) {
> priv->active_offloads |= ENETC_F_QCI;
> ndev->features |= NETIF_F_HW_TC;
> ndev->hw_features |= NETIF_F_HW_TC;
> @@ -116,6 +139,7 @@ void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
> /* pick up primary MAC address from SI */
> enetc_load_primary_mac_addr(&si->hw, ndev);
> }
> +EXPORT_SYMBOL_GPL(enetc_pf_netdev_setup);
>
> static int enetc_mdio_probe(struct enetc_pf *pf, struct device_node *np)
> {
> @@ -162,6 +186,9 @@ static int enetc_imdio_create(struct enetc_pf *pf)
> struct mii_bus *bus;
> int err;
>
> + if (!pf->ops->create_pcs)
> + return -EOPNOTSUPP;
> +
> bus = mdiobus_alloc_size(sizeof(*mdio_priv));
> if (!bus)
> return -ENOMEM;
> @@ -184,7 +211,7 @@ static int enetc_imdio_create(struct enetc_pf *pf)
> goto free_mdio_bus;
> }
>
> - phylink_pcs = lynx_pcs_create_mdiodev(bus, 0);
> + phylink_pcs = pf->ops->create_pcs(pf, bus);
> if (IS_ERR(phylink_pcs)) {
> err = PTR_ERR(phylink_pcs);
> dev_err(dev, "cannot create lynx pcs (%d)\n", err);
> @@ -205,8 +232,8 @@ static int enetc_imdio_create(struct enetc_pf *pf)
>
> static void enetc_imdio_remove(struct enetc_pf *pf)
> {
> - if (pf->pcs)
> - lynx_pcs_destroy(pf->pcs);
> + if (pf->pcs && pf->ops->destroy_pcs)
> + pf->ops->destroy_pcs(pf->pcs);
>
> if (pf->imdio) {
> mdiobus_unregister(pf->imdio);
> @@ -246,12 +273,14 @@ int enetc_mdiobus_create(struct enetc_pf *pf, struct device_node *node)
>
> return 0;
> }
> +EXPORT_SYMBOL_GPL(enetc_mdiobus_create);
>
> void enetc_mdiobus_destroy(struct enetc_pf *pf)
> {
> enetc_mdio_remove(pf);
> enetc_imdio_remove(pf);
> }
> +EXPORT_SYMBOL_GPL(enetc_mdiobus_destroy);
>
> int enetc_phylink_create(struct enetc_ndev_priv *priv, struct device_node *node,
> const struct phylink_mac_ops *ops)
> @@ -288,8 +317,13 @@ int enetc_phylink_create(struct enetc_ndev_priv *priv, struct device_node *node,
>
> return 0;
> }
> +EXPORT_SYMBOL_GPL(enetc_phylink_create);
>
> void enetc_phylink_destroy(struct enetc_ndev_priv *priv)
> {
> phylink_destroy(priv->phylink);
> }
> +EXPORT_SYMBOL_GPL(enetc_phylink_destroy);
> +
> +MODULE_DESCRIPTION("NXP ENETC PF common functionality driver");
> +MODULE_LICENSE("Dual BSD/GPL");
> --
> 2.34.1
>
Powered by blists - more mailing lists