[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <abro3enahzbugcwokcyyhwybbokestbigvzhywxhnfrdjihni3@7ej2hkgbgtf6>
Date: Fri, 18 Oct 2024 01:32:13 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Luo Jie <quic_luoj@...cinc.com>
Cc: Bjorn Andersson <andersson@...nel.org>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Catalin Marinas <catalin.marinas@....com>, Will Deacon <will@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, quic_kkumarcs@...cinc.com, quic_suruchia@...cinc.com,
quic_pavir@...cinc.com, quic_linchen@...cinc.com, quic_leiwei@...cinc.com,
bartosz.golaszewski@...aro.org, srinivas.kandagatla@...aro.org
Subject: Re: [PATCH v4 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
On Tue, Oct 15, 2024 at 10:16:54PM +0800, Luo Jie wrote:
> The CMN PLL clock controller allows selection of an input
> clock rate from a defined set of input clock rates. It in-turn
> supplies fixed rate output clocks to the hardware blocks that
> provide ethernet functions such as PPE (Packet Process Engine)
> and connected switch or PHY, and to GCC.
>
> Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
> ---
> arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi | 6 +++++-
> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 20 +++++++++++++++++++-
> 2 files changed, 24 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> index 91e104b0f865..77e1e42083f3 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> @@ -3,7 +3,7 @@
> * IPQ9574 RDP board common device tree source
> *
> * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> /dts-v1/;
> @@ -164,6 +164,10 @@ &usb3 {
> status = "okay";
> };
>
> +&cmn_pll_ref_clk {
> + clock-frequency = <48000000>;
> +};
> +
> &xo_board_clk {
> clock-frequency = <24000000>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 14c7b3a78442..93f66bb83c5a 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -3,10 +3,11 @@
> * IPQ9574 SoC device tree source
> *
> * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> #include <dt-bindings/clock/qcom,apss-ipq.h>
> +#include <dt-bindings/clock/qcom,ipq-cmn-pll.h>
> #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
> #include <dt-bindings/interconnect/qcom,ipq9574.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -19,6 +20,11 @@ / {
> #size-cells = <2>;
>
> clocks {
> + cmn_pll_ref_clk: cmn-pll-ref-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
Which block provides this clock? If it is provided by the external XO
then it should not be a part of the SoC dtsi.
> +
> sleep_clk: sleep-clk {
> compatible = "fixed-clock";
> #clock-cells = <0>;
> @@ -243,6 +249,18 @@ mdio: mdio@...00 {
> status = "disabled";
> };
>
> + cmn_pll: clock-controller@...00 {
> + compatible = "qcom,ipq9574-cmn-pll";
> + reg = <0x0009b000 0x800>;
> + clocks = <&cmn_pll_ref_clk>,
> + <&gcc GCC_CMN_12GPLL_AHB_CLK>,
> + <&gcc GCC_CMN_12GPLL_SYS_CLK>;
> + clock-names = "ref", "ahb", "sys";
> + #clock-cells = <1>;
> + assigned-clocks = <&cmn_pll CMN_PLL_CLK>;
> + assigned-clock-rates-u64 = /bits/ 64 <12000000000>;
> + };
> +
> qfprom: efuse@...00 {
> compatible = "qcom,ipq9574-qfprom", "qcom,qfprom";
> reg = <0x000a4000 0x5a1>;
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists