[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAKEyCaDUfn4jtCdTt9JJ-Qe+CCudORPwcjj5i5=G28ANc+eCRg@mail.gmail.com>
Date: Fri, 18 Oct 2024 00:51:59 +0200
From: Paweł Owoc <frut3k7@...il.com>
To: Jeff Johnson <quic_jjohnson@...cinc.com>
Cc: Kalle Valo <kvalo@...nel.org>, Jeff Johnson <jjohnson@...nel.org>,
linux-wireless@...r.kernel.org, ath10k@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] wifi: ath10k: add channel 177 for 5 GHz band
On Fri, Oct 11, 2024 at 6:51 PM Jeff Johnson <quic_jjohnson@...cinc.com> wrote:
>
> On 10/8/2024 11:49 PM, Paweł Owoc wrote:> Add support for channel 177 (5885
> MHz ) for the 5 GHz band.
> >
> > Tested-on: qca988x hw2.0 firmware ver 10.2.4-1.0-00047
>
> Can you elaborate on what was tested in your commit text? And more
> importantly, what is the impact on existing devices, especially given that
> existing devices would not have calibration data for this channel in the board
> files? Does the QCA988x board file even have calibration data for this channel?
>
In the case of ath10k we use an external regulatory database.
For the country "US" channels 169, 173 and 177 are marked as NO-IR and
we cannot run AP on them.
Even if channels are not disabled in the board files:
* 5845.0 MHz [169] (27.0 dBm) (no IR)
* 5865.0 MHz [173] (27.0 dBm) (no IR)
* 5885.0 MHz [177] (27.0 dBm) (no IR)
I only tested the use as a client on channel 177:
root@...nWrt:~# iwinfo phy1 scan
Cell 01 - Address: XX:XX:XX:XX:XX:XX
ESSID: "ch177"
Mode: Master Frequency: 5.885 GHz Band: 5 GHz Channel: 177
Signal: -43 dBm Quality: 67/70
Encryption: mixed WPA2/WPA3 PSK/SAE (CCMP)
HT Operation:
Primary Channel: 177
Secondary Channel Offset: no secondary
Channel Width: 20 MHz
> >
> > Signed-off-by: Paweł Owoc <frut3k7@...il.com>
> > ---
>
> what is the diff from v1?
> for future reference when you submit a new version of a patch you should
> include a patch changelog after the ---, see:
> https://www.kernel.org/doc/html/latest/process/submitting-patches.html#the-canonical-patch-format
>
There are no differences. My previous patch was deferred. I don't know
exactly how to proceed in such a case.
> > drivers/net/wireless/ath/ath10k/core.h | 4 ++--
> > drivers/net/wireless/ath/ath10k/mac.c | 1 +
> > 2 files changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
> > index 446dca74f06a..3dff8c028526 100644
> > --- a/drivers/net/wireless/ath/ath10k/core.h
> > +++ b/drivers/net/wireless/ath/ath10k/core.h
> > @@ -39,8 +39,8 @@
> > #define WMI_READY_TIMEOUT (5 * HZ)
> > #define ATH10K_FLUSH_TIMEOUT_HZ (5 * HZ)
> > #define ATH10K_CONNECTION_LOSS_HZ (3 * HZ)
> > -#define ATH10K_NUM_CHANS 41
> > -#define ATH10K_MAX_5G_CHAN 173
> > +#define ATH10K_NUM_CHANS 42
> > +#define ATH10K_MAX_5G_CHAN 177
> >
> > /* Antenna noise floor */
> > #define ATH10K_DEFAULT_NOISE_FLOOR -95
> > diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
> > index 646e1737d4c4..cee6a4d287b5 100644
> > --- a/drivers/net/wireless/ath/ath10k/mac.c
> > +++ b/drivers/net/wireless/ath/ath10k/mac.c
> > @@ -9543,6 +9543,7 @@ static const struct ieee80211_channel ath10k_5ghz_channels[] = {
> > CHAN5G(165, 5825, 0),
> > CHAN5G(169, 5845, 0),
> > CHAN5G(173, 5865, 0),
> > + CHAN5G(177, 5885, 0),
> > /* If you add more, you may need to change ATH10K_MAX_5G_CHAN */
> > /* And you will definitely need to change ATH10K_NUM_CHANS in core.h */
> > };
>
Powered by blists - more mailing lists