[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241017030412.265000-6-quic_qianyu@quicinc.com>
Date: Wed, 16 Oct 2024 20:04:10 -0700
From: Qiang Yu <quic_qianyu@...cinc.com>
To: manivannan.sadhasivam@...aro.org, vkoul@...nel.org, kishon@...nel.org,
robh@...nel.org, andersson@...nel.org, konradybcio@...nel.org,
krzk+dt@...nel.org, conor+dt@...nel.org, mturquette@...libre.com,
sboyd@...nel.org, abel.vesa@...aro.org, quic_msarkar@...cinc.com,
quic_devipriy@...cinc.com
Cc: dmitry.baryshkov@...aro.org, kw@...ux.com, lpieralisi@...nel.org,
neil.armstrong@...aro.org, linux-arm-msm@...r.kernel.org,
linux-phy@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
linux-clk@...r.kernel.org, johan+linaro@...nel.org,
Qiang Yu <quic_qianyu@...cinc.com>
Subject: [PATCH v7 5/7] PCI: qcom: Remove BDF2SID mapping config for SC8280X family SoC
On SC8280X family SoC, PCIe controllers are connected to SMMUv3, hence
they don't need the config_sid() callback in ops_1_9_0 struct. Fix it by
introducing a new ops struct, namely ops_1_21_0 which is same as ops_1_9_0
without config_sid() callback so that BDF2SID mapping won't be configured
during init.
Fixes: 70574511f3fc ("PCI: qcom: Add support for SC8280XP")
Signed-off-by: Qiang Yu <quic_qianyu@...cinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
drivers/pci/controller/dwc/pcie-qcom.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 88a98be930e3..468bd4242e61 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1367,6 +1367,16 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
};
+/* Qcom IP rev.: 1.21.0 */
+static const struct qcom_pcie_ops ops_1_21_0 = {
+ .get_resources = qcom_pcie_get_resources_2_7_0,
+ .init = qcom_pcie_init_2_7_0,
+ .post_init = qcom_pcie_post_init_2_7_0,
+ .host_post_init = qcom_pcie_host_post_init_2_7_0,
+ .deinit = qcom_pcie_deinit_2_7_0,
+ .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
+};
+
static const struct qcom_pcie_cfg cfg_1_0_0 = {
.ops = &ops_1_0_0,
};
@@ -1405,7 +1415,7 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = {
};
static const struct qcom_pcie_cfg cfg_sc8280xp = {
- .ops = &ops_1_9_0,
+ .ops = &ops_1_21_0,
.no_l0s = true,
};
--
2.34.1
Powered by blists - more mailing lists