[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<PAXPR04MB85103D3E433F3FBE5DDFA15C88472@PAXPR04MB8510.eurprd04.prod.outlook.com>
Date: Thu, 17 Oct 2024 03:09:15 +0000
From: Wei Fang <wei.fang@....com>
To: Marc Kleine-Budde <mkl@...gutronix.de>, Shenwei Wang
<shenwei.wang@....com>, Clark Wang <xiaoning.wang@....com>, "David S. Miller"
<davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski
<kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Richard Cochran
<richardcochran@...il.com>
CC: "imx@...ts.linux.dev" <imx@...ts.linux.dev>, "netdev@...r.kernel.org"
<netdev@...r.kernel.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "kernel@...gutronix.de"
<kernel@...gutronix.de>
Subject: RE: [PATCH net-next 07/13] net: fec: fec_probe(): update quirk: bring
IRQs in correct order
> -----Original Message-----
> From: Marc Kleine-Budde <mkl@...gutronix.de>
> Sent: 2024年10月17日 5:52
> To: Wei Fang <wei.fang@....com>; Shenwei Wang <shenwei.wang@....com>;
> Clark Wang <xiaoning.wang@....com>; David S. Miller
> <davem@...emloft.net>; Eric Dumazet <edumazet@...gle.com>; Jakub
> Kicinski <kuba@...nel.org>; Paolo Abeni <pabeni@...hat.com>; Richard
> Cochran <richardcochran@...il.com>
> Cc: imx@...ts.linux.dev; netdev@...r.kernel.org; linux-kernel@...r.kernel.org;
> kernel@...gutronix.de; Marc Kleine-Budde <mkl@...gutronix.de>
> Subject: [PATCH net-next 07/13] net: fec: fec_probe(): update quirk: bring IRQs
> in correct order
>
> With i.MX8MQ and compatible SoCs, the order of the IRQs in the device
> tree is not optimal. The driver expects the first three IRQs to match
> their corresponding queue, while the last (fourth) IRQ is used for the
> PPS:
>
> - 1st IRQ: "int0": queue0 + other IRQs
> - 2nd IRQ: "int1": queue1
> - 3rd IRQ: "int2": queue2
> - 4th IRQ: "pps": pps
>
> However, the i.MX8MQ and compatible SoCs do not use the
> "interrupt-names" property and specify the IRQs in the wrong order:
>
> - 1st IRQ: queue1
> - 2nd IRQ: queue2
> - 3rd IRQ: queue0 + other IRQs
> - 4th IRQ: pps
>
> First rename the quirk from FEC_QUIRK_WAKEUP_FROM_INT2 to
> FEC_QUIRK_INT2_IS_MAIN_IRQ, to better reflect it's functionality.
>
> If the FEC_QUIRK_INT2_IS_MAIN_IRQ quirk is active, put the IRQs back
> in the correct order, this is done in fec_probe().
>
I think FEC_QUIRK_INT2_IS_MAIN_IRQ or FEC_QUIRK_WAKEUP_FROM_INT2
is *NO* needed anymore. Actually, INT2 is also the main IRQ for i.MX8QM and
its compatible SoCs, but i.MX8QM uses a different solution. I don't know why
there are two different ways of doing it, as I don't know the history. But you can
refer to the solution of i.MX8QM, which I think is more suitable.
See arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi, the IRQ 258 is
placed first.
fec1: ethernet@...40000 {
reg = <0x5b040000 0x10000>;
interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
> Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
> ---
> drivers/net/ethernet/freescale/fec.h | 24 ++++++++++++++++++++++--
> drivers/net/ethernet/freescale/fec_main.c | 18 +++++++++++-------
> 2 files changed, 33 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/fec.h
> b/drivers/net/ethernet/freescale/fec.h
> index
> 63744a86752540fcede7fc4c29865b2529492526..b0f1a3e28d5c8052be3a8a0
> fa18303a1df2bb5bd 100644
> --- a/drivers/net/ethernet/freescale/fec.h
> +++ b/drivers/net/ethernet/freescale/fec.h
> @@ -504,8 +504,28 @@ struct bufdesc_ex {
> */
> #define FEC_QUIRK_DELAYED_CLKS_SUPPORT (1 << 21)
>
> -/* i.MX8MQ SoC integration mix wakeup interrupt signal into "int2" interrupt
> line. */
> -#define FEC_QUIRK_WAKEUP_FROM_INT2 (1 << 22)
> +/* With i.MX8MQ and compatible SoCs, the order of the IRQs in the
> + * device tree is not optimal. The driver expects the first three IRQs
> + * to match their corresponding queue, while the last (fourth) IRQ is
> + * used for the PPS:
> + *
> + * - 1st IRQ: "int0": queue0 + other IRQs
> + * - 2nd IRQ: "int1": queue1
> + * - 3rd IRQ: "int2": queue2
> + * - 4th IRQ: "pps": pps
> + *
> + * However, the i.MX8MQ and compatible SoCs do not use the
> + * "interrupt-names" property and specify the IRQs in the wrong order:
> + *
> + * - 1st IRQ: queue1
> + * - 2nd IRQ: queue2
> + * - 3rd IRQ: queue0 + other IRQs
> + * - 4th IRQ: pps
> + *
> + * If the following quirk is active, put the IRQs back in the correct
> + * order, this is done in fec_probe().
> + */
> +#define FEC_QUIRK_DT_IRQ2_IS_MAIN_IRQ BIT(22)
>
> /* i.MX6Q adds pm_qos support */
> #define FEC_QUIRK_HAS_PMQOS BIT(23)
> diff --git a/drivers/net/ethernet/freescale/fec_main.c
> b/drivers/net/ethernet/freescale/fec_main.c
> index
> d948ed9810027d5fabe521dc3af2cf505dacd13e..f124ffe3619d82dc089f8494
> d33d2398e6f631fb 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -157,7 +157,7 @@ static const struct fec_devinfo fec_imx8mq_info = {
> FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE |
> FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE |
> FEC_QUIRK_CLEAR_SETUP_MII | FEC_QUIRK_HAS_MULTI_QUEUES
> |
> - FEC_QUIRK_HAS_EEE | FEC_QUIRK_WAKEUP_FROM_INT2 |
> + FEC_QUIRK_HAS_EEE | FEC_QUIRK_DT_IRQ2_IS_MAIN_IRQ |
> FEC_QUIRK_HAS_MDIO_C45,
> };
>
> @@ -4260,10 +4260,7 @@ static void fec_enet_get_wakeup_irq(struct
> platform_device *pdev)
> struct net_device *ndev = platform_get_drvdata(pdev);
> struct fec_enet_private *fep = netdev_priv(ndev);
>
> - if (fep->quirks & FEC_QUIRK_WAKEUP_FROM_INT2)
> - fep->wake_irq = fep->irq[2];
> - else
> - fep->wake_irq = fep->irq[0];
> + fep->wake_irq = fep->irq[0];
> }
>
> static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
> @@ -4495,10 +4492,17 @@ fec_probe(struct platform_device *pdev)
> goto failed_init;
>
> for (i = 0; i < irq_cnt; i++) {
> - snprintf(irq_name, sizeof(irq_name), "int%d", i);
> + int irq_num;
> +
> + if (fep->quirks & FEC_QUIRK_DT_IRQ2_IS_MAIN_IRQ)
> + irq_num = (i + irq_cnt - 1) % irq_cnt;
> + else
> + irq_num = i;
> +
> + snprintf(irq_name, sizeof(irq_name), "int%d", irq_num);
> irq = platform_get_irq_byname_optional(pdev, irq_name);
> if (irq < 0)
> - irq = platform_get_irq(pdev, i);
> + irq = platform_get_irq(pdev, irq_num);
> if (irq < 0) {
> ret = irq;
> goto failed_irq;
>
> --
> 2.45.2
>
Powered by blists - more mailing lists