lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241017114934.240d35b4@akair>
Date: Thu, 17 Oct 2024 11:49:34 +0200
From: Andreas Kemnade <andreas@...nade.info>
To: "Rob Herring (Arm)" <robh@...nel.org>
Cc: aaro.koskinen@....fi, khilman@...libre.com, rogerq@...nel.org,
 linux-omap@...r.kernel.org, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 devicetree@...r.kernel.org, Conor Dooley <conor+dt@...nel.org>,
 linux-kernel@...r.kernel.org, tony@...mide.com
Subject: Re: [PATCH v2 0/4] ARM: dts: omap: omap4-epson-embt2ws: misc gpio
 definitions

Am Thu, 10 Oct 2024 09:30:09 -0500
schrieb "Rob Herring (Arm)" <robh@...nel.org>:

> On Thu, 10 Oct 2024 14:29:53 +0200, Andreas Kemnade wrote:
> > Bring the system into a more defined state and do not rely
> > on things being initialized by bootloader.
> > 
> > Changes in V2:
> > - better comment strange GPIOs
> > - proper names for regulator nodes
> > 
> > Andreas Kemnade (4):
> >   ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators
> >   ARM: dts: omap: omap4-epson-embt2ws: wire up regulators
> >   ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs
> >   ARM: dts: omap: omap4-epson-embt2ws: add GPIO expander
> > 
> >  .../boot/dts/ti/omap/omap4-epson-embt2ws.dts  | 183
> > +++++++++++++++++- 1 file changed, 179 insertions(+), 4 deletions(-)
> > 
> > --
> > 2.39.5
> > 
> > 
> >   
> 
> 
> My bot found new DTB warnings on the .dts files added or changed in
> this series.
> 
> Some warnings may be from an existing SoC .dtsi. Or perhaps the
> warnings are fixed by another series. Ultimately, it is up to the
> platform maintainer whether these warnings are acceptable or not. No
> need to reply unless the platform maintainer has comments.
> 
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
> 
>   pip3 install dtschema --upgrade
> 
> 
> New warnings running 'make CHECK_DTBS=y
> ti/omap/omap4-epson-embt2ws.dtb' for
> 20241010122957.85164-1-andreas@...nade.info:
> 
> arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dtb: serial@0:
> {'compatible': ['ti,omap4-uart'], 'reg': [[0, 256]], 'interrupts':
> [[0, 74, 4]], 'clock-frequency': 48000000, 'pinctrl-names':
> ['default'], 'pinctrl-0': [[115]], 'interrupts-extended': [[1, 0, 74,
> 4], [116, 260]], '$nodename': ['serial@0']} is valid under each of
> {'required': ['interrupts-extended']}, {'required': ['interrupts']}
> from schema $id: http://devicetree.org/schemas/serial/8250_omap.yaml#
> arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dtb: serial@0:
> {'compatible': ['ti,omap4-uart'], 'reg': [[0, 256]], 'interrupts':
> [[0, 73, 4]], 'clock-frequency': 48000000, 'pinctrl-names':
> ['default'], 'pinctrl-0': [[118, 119]], 'interrupts-extended': [[1,
> 0, 73, 4], [116, 220]], 'bluetooth-gnss': {'compatible':
> ['ti,wl1283-st'], 'enable-gpios': [[120, 25, 0]], 'clocks': [[121,
> 1]], 'clock-names': ['ext_clock']}, '$nodename': ['serial@0']} is
> valid under each of {'required': ['interrupts-extended']},
> {'required': ['interrupts']} from schema $id:
> http://devicetree.org/schemas/serial/8250_omap.yaml#
>
To make sure I am getting this right: According to wdiff, the
difference is:

 'pinctrl-0': [-[[116, 117]],-] {+[[118, 119]],+}
'interrupts-extended': [[1, 0, 73, 4], [-[114,-] {+[116,+} 220]]

So my understanding is that phandle numbers are reordered and one
of the reordered numbers pops up in a warning message and cannot
easily be filtered away. Are there any tools or procedures in general to
filter out phandle reenumeration noise? Also when reordering things
expecting no functional change and diffing dtbs that would be helpful.

Regards,
Andreas


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ