[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZxJn_Xf4NO3eAfey@hovoldconsulting.com>
Date: Fri, 18 Oct 2024 15:51:57 +0200
From: Johan Hovold <johan@...nel.org>
To: Qiang Yu <quic_qianyu@...cinc.com>
Cc: manivannan.sadhasivam@...aro.org, vkoul@...nel.org, kishon@...nel.org,
robh@...nel.org, andersson@...nel.org, konradybcio@...nel.org,
krzk+dt@...nel.org, conor+dt@...nel.org, mturquette@...libre.com,
sboyd@...nel.org, abel.vesa@...aro.org, quic_msarkar@...cinc.com,
quic_devipriy@...cinc.com, dmitry.baryshkov@...aro.org,
kw@...ux.com, lpieralisi@...nel.org, neil.armstrong@...aro.org,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org, linux-clk@...r.kernel.org,
johan+linaro@...nel.org
Subject: Re: [PATCH v7 5/7] PCI: qcom: Remove BDF2SID mapping config for
SC8280X family SoC
On Wed, Oct 16, 2024 at 08:04:10PM -0700, Qiang Yu wrote:
> On SC8280X family SoC, PCIe controllers are connected to SMMUv3, hence
> they don't need the config_sid() callback in ops_1_9_0 struct. Fix it by
> introducing a new ops struct, namely ops_1_21_0 which is same as ops_1_9_0
> without config_sid() callback so that BDF2SID mapping won't be configured
> during init.
The sc8280xp PCIe devicetree nodes do not specify an 'iommu-map' so the
config_sid() callback is effectively a no-op. Please rephrase this so
that it becomes obvious that this is a clean up rather than fix.
> Fixes: 70574511f3fc ("PCI: qcom: Add support for SC8280XP")
And drop the Fixes tag.
> Signed-off-by: Qiang Yu <quic_qianyu@...cinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 88a98be930e3..468bd4242e61 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1367,6 +1367,16 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
> .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> };
>
> +/* Qcom IP rev.: 1.21.0 */
Is this the actual IP revision on sc8280xp (and not just the revision
used on x1e80100)?
Please also provide the Synopsis IP rev like the other configs do.
> +static const struct qcom_pcie_ops ops_1_21_0 = {
> + .get_resources = qcom_pcie_get_resources_2_7_0,
> + .init = qcom_pcie_init_2_7_0,
> + .post_init = qcom_pcie_post_init_2_7_0,
> + .host_post_init = qcom_pcie_host_post_init_2_7_0,
> + .deinit = qcom_pcie_deinit_2_7_0,
> + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> +};
> +
> static const struct qcom_pcie_cfg cfg_1_0_0 = {
> .ops = &ops_1_0_0,
> };
And try to keep these structs sorted by revision. At least put this one
after ops_1_9_0.
Johan
Powered by blists - more mailing lists