[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241018025452.1362293-5-alexey.klimov@linaro.org>
Date: Fri, 18 Oct 2024 03:54:50 +0100
From: Alexey Klimov <alexey.klimov@...aro.org>
To: linux-sound@...r.kernel.org,
srinivas.kandagatla@...aro.org,
broonie@...nel.org
Cc: lgirdwood@...il.com,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
andersson@...nel.org,
konradybcio@...nel.org,
perex@...ex.cz,
tiwai@...e.com,
linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org,
dmitry.baryshkov@...aro.org,
krzysztof.kozlowski@...aro.org,
caleb.connolly@...aro.org,
linux-kernel@...r.kernel.org,
a39.skl@...il.com
Subject: [PATCH v3 4/5] arm64: dts: qcom: sm4250: add LPASS LPI pin controller
Add the Low Power Audio SubSystem Low Power Island (LPASS LPI) pin
controller device node required for audio subsystem on Qualcomm
QRB4210 RB2. QRB4210 is based on sm4250 which has a slightly different
lpass pin controller comparing to sm6115.
While at this, also add description of lpi_i2s2 pins (active state)
required for audio playback via HDMI.
Cc: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@...aro.org>
---
arch/arm64/boot/dts/qcom/sm4250.dtsi | 39 ++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi
index c5add8f44fc0..ed5eb5818d5f 100644
--- a/arch/arm64/boot/dts/qcom/sm4250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi
@@ -36,3 +36,42 @@ &CPU6 {
&CPU7 {
compatible = "qcom,kryo240";
};
+
+&lpass_tlmm {
+ compatible = "qcom,sm4250-lpass-lpi-pinctrl";
+ gpio-ranges = <&lpass_tlmm 0 0 26>;
+
+ lpi_i2s2_active: lpi-i2s2-active-state {
+ sck-pins {
+ pins = "gpio10";
+ function = "i2s2_clk";
+ bias-disable;
+ drive-strength = <8>;
+ output-high;
+ };
+
+ ws-pins {
+ pins = "gpio11";
+ function = "i2s2_ws";
+ bias-disable;
+ drive-strength = <8>;
+ output-high;
+ };
+
+ data-pins {
+ pins = "gpio12";
+ function = "i2s2_data";
+ bias-disable;
+ drive-strength = <8>;
+ output-high;
+ };
+
+ ext-mclk1-pins {
+ pins = "gpio18";
+ function = "ext_mclk1_a";
+ bias-disable;
+ drive-strength = <16>;
+ output-high;
+ };
+ };
+};
--
2.45.2
Powered by blists - more mailing lists