[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<TYCPR01MB113325E42E2E31FB953B1CDF586402@TYCPR01MB11332.jpnprd01.prod.outlook.com>
Date: Fri, 18 Oct 2024 07:34:19 +0000
From: Biju Das <biju.das.jz@...renesas.com>
To: Liu Ying <victor.liu@....com>, "devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>, "imx@...ts.linux.dev" <imx@...ts.linux.dev>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "dri-devel@...ts.freedesktop.org"
<dri-devel@...ts.freedesktop.org>
CC: "robh@...nel.org" <robh@...nel.org>, "krzk+dt@...nel.org"
<krzk+dt@...nel.org>, "conor+dt@...nel.org" <conor+dt@...nel.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>, "s.hauer@...gutronix.de"
<s.hauer@...gutronix.de>, "kernel@...gutronix.de" <kernel@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>, "andrzej.hajda@...el.com"
<andrzej.hajda@...el.com>, "neil.armstrong@...aro.org"
<neil.armstrong@...aro.org>, "rfoss@...nel.org" <rfoss@...nel.org>,
laurent.pinchart <laurent.pinchart@...asonboard.com>, "jonas@...boo.se"
<jonas@...boo.se>, "jernej.skrabec@...il.com" <jernej.skrabec@...il.com>,
"maarten.lankhorst@...ux.intel.com" <maarten.lankhorst@...ux.intel.com>,
"mripard@...nel.org" <mripard@...nel.org>, "tzimmermann@...e.de"
<tzimmermann@...e.de>, "airlied@...il.com" <airlied@...il.com>,
"simona@...ll.ch" <simona@...ll.ch>, "marex@...x.de" <marex@...x.de>,
"stefan@...er.ch" <stefan@...er.ch>, "dmitry.baryshkov@...aro.org"
<dmitry.baryshkov@...aro.org>
Subject: RE: [PATCH 5/5] drm: lcdif: Use drm_bridge_connector
Hi Liu Ying,
Thanks for the patch.
> -----Original Message-----
> From: linux-arm-kernel <linux-arm-kernel-bounces@...ts.infradead.org> On Behalf Of Liu Ying
> Sent: Friday, October 18, 2024 7:48 AM
> Subject: [PATCH 5/5] drm: lcdif: Use drm_bridge_connector
>
> Initialize a connector by calling drm_bridge_connector_init() for each encoder so that down stream
> bridge drivers don't need to create connectors any more.
>
> Signed-off-by: Liu Ying <victor.liu@....com>
> ---
> drivers/gpu/drm/mxsfb/Kconfig | 1 +
> drivers/gpu/drm/mxsfb/lcdif_drv.c | 17 ++++++++++++++++-
> 2 files changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mxsfb/Kconfig b/drivers/gpu/drm/mxsfb/Kconfig index
> 264e74f45554..06c95e556380 100644
> --- a/drivers/gpu/drm/mxsfb/Kconfig
> +++ b/drivers/gpu/drm/mxsfb/Kconfig
> @@ -27,6 +27,7 @@ config DRM_IMX_LCDIF
> depends on DRM && OF
> depends on COMMON_CLK
> depends on ARCH_MXC || COMPILE_TEST
> + select DRM_BRIDGE_CONNECTOR
> select DRM_CLIENT_SELECTION
> select DRM_MXS
> select DRM_KMS_HELPER
> diff --git a/drivers/gpu/drm/mxsfb/lcdif_drv.c b/drivers/gpu/drm/mxsfb/lcdif_drv.c
> index 58ccad9c425d..d4521da6675e 100644
> --- a/drivers/gpu/drm/mxsfb/lcdif_drv.c
> +++ b/drivers/gpu/drm/mxsfb/lcdif_drv.c
> @@ -16,7 +16,9 @@
>
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_bridge.h>
> +#include <drm/drm_bridge_connector.h>
> #include <drm/drm_client_setup.h>
> +#include <drm/drm_connector.h>
> #include <drm/drm_drv.h>
> #include <drm/drm_encoder.h>
> #include <drm/drm_fbdev_dma.h>
> @@ -56,6 +58,7 @@ static int lcdif_attach_bridge(struct lcdif_drm_private *lcdif)
> struct device_node *remote;
> struct of_endpoint of_ep;
> struct drm_encoder *encoder;
> + struct drm_connector *connector;
>
> remote = of_graph_get_remote_port_parent(ep);
> if (!of_device_is_available(remote)) { @@ -97,13 +100,25 @@ static int
> lcdif_attach_bridge(struct lcdif_drm_private *lcdif)
> return ret;
> }
>
> - ret = drm_bridge_attach(encoder, bridge, NULL, 0);
> + ret = drm_bridge_attach(encoder, bridge, NULL,
> + DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> if (ret) {
> of_node_put(ep);
> return dev_err_probe(dev, ret,
> "Failed to attach bridge for endpoint%u\n",
> of_ep.id);
> }
> +
> + connector = drm_bridge_connector_init(lcdif->drm, encoder);
> + if (IS_ERR(connector)) {
> + ret = PTR_ERR(connector);
> + dev_err(dev, "Failed to initialize bridge connector: %d\n",
> + ret);
> + of_node_put(ep);
> + return ret;
Maybe same error path style like above??
of_node_put(ep);
return dev_err_probe(dev, PTR_ERR(connector),"Failed to initialize bridge connector");
Cheers,
Biju
> + }
> +
> + drm_connector_attach_encoder(connector, encoder);
> }
>
> return 0;
> --
> 2.34.1
>
Powered by blists - more mailing lists