[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <eslfc3ejjjpbw5wuf4khcoixeaitpb47iwf6kug7cryplcxcui@sieiyekdpczn>
Date: Sat, 19 Oct 2024 16:59:38 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: shiyongbang <shiyongbang@...wei.com>
Cc: xinliang.liu@...aro.org, tiantao6@...ilicon.com,
maarten.lankhorst@...ux.intel.com, mripard@...nel.org, tzimmermann@...e.de, airlied@...il.com,
daniel@...ll.ch, kong.kongxinwei@...ilicon.com, liangjian010@...wei.com,
chenjianmin@...wei.com, lidongming5@...wei.com, libaihan@...wei.com,
shenjian15@...wei.com, shaojijie@...wei.com, dri-devel@...ts.freedesktop.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH drm-dp 3/4] drm/hisilicon/hibmc: add dp kapi moduel in
hibmc drivers
On Mon, Sep 30, 2024 at 06:06:09PM +0800, shiyongbang wrote:
> From: baihan li <libaihan@...wei.com>
>
> Build a kapi level that hibmc driver can enable dp by
> calling these kapi functions.
>
> Signed-off-by: baihan li <libaihan@...wei.com>
> ---
> drivers/gpu/drm/hisilicon/hibmc/Makefile | 2 +-
> .../gpu/drm/hisilicon/hibmc/dp/dp_config.h | 20 ++++++++
> drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.c | 12 ++---
> drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.h | 48 +++++++++++++++++++
> 4 files changed, 75 insertions(+), 7 deletions(-)
> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_config.h
> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.h
>
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/Makefile b/drivers/gpu/drm/hisilicon/hibmc/Makefile
> index 94d77da88bbf..693036dfab52 100644
> --- a/drivers/gpu/drm/hisilicon/hibmc/Makefile
> +++ b/drivers/gpu/drm/hisilicon/hibmc/Makefile
> @@ -1,5 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0-only
> hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_de.o hibmc_drm_vdac.o hibmc_drm_i2c.o \
> - dp/dp_aux.o dp/dp_link.o
> + dp/dp_aux.o dp/dp_link.o dp/dp_kapi.o
>
> obj-$(CONFIG_DRM_HISI_HIBMC) += hibmc-drm.o
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_config.h b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_config.h
> new file mode 100644
> index 000000000000..a6353a808cc4
> --- /dev/null
> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_config.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/* Copyright (c) 2024 Hisilicon Limited. */
> +
> +#ifndef DP_CONFIG_H
> +#define DP_CONFIG_H
> +
> +#define DP_BPP 24
> +#define DP_SYMBOL_PER_FCLK 4
> +#define DP_MIN_PULSE_NUM 0x9
> +#define DP_MSA1 0x20
> +#define DP_MSA2 0x845c00
> +#define DP_OFFSET 0x1e0000
> +#define DP_HDCP 0x2
> +#define DP_INT_RST 0xffff
> +#define DP_DPTX_RST 0x3ff
> +#define DP_CLK_EN 0x7
> +#define DP_SYNC_EN_MASK 0x3
> +#define DP_LINK_RATE_CAL 27
I think some of these defines were used in previous patches. Please make
sure that at each step the code builds without errors.
> +
> +#endif
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.c b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.c
> index 4091723473ad..ca7edc69427c 100644
> --- a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.c
> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.c
> @@ -64,12 +64,12 @@ static void hibmc_dp_set_tu(struct hibmc_dp_dev *dp, struct dp_mode *mode)
> rate_ks = dp->link.cap.link_rate * DP_LINK_RATE_CAL;
> value = (pixel_clock * bpp * 5000) / (61 * lane_num * rate_ks);
>
> - if (value % 10 == 9) { /* 10: div, 9: carry */
> - tu_symbol_size = value / 10 + 1; /* 10: div */
> + if (value % 10 == 9) { /* 9 carry */
> + tu_symbol_size = value / 10 + 1;
> tu_symbol_frac_size = 0;
> } else {
> - tu_symbol_size = value / 10; /* 10: div */
> - tu_symbol_frac_size = value % 10 + 1; /* 10: div */
> + tu_symbol_size = value / 10;
> + tu_symbol_frac_size = value % 10 + 1;
> }
>
> drm_info(dp->dev, "tu value: %u.%u value: %u\n",
> @@ -158,7 +158,7 @@ static void hibmc_dp_link_cfg(struct hibmc_dp_dev *dp, struct dp_mode *mode)
> dp_write_bits(dp->base + DP_VIDEO_CTRL,
> DP_CFG_STREAM_HSYNC_POLARITY, mode->h_pol);
>
> - /* MSA mic 0 and 1*/
> + /* MSA mic 0 and 1 */
> writel(DP_MSA1, dp->base + DP_VIDEO_MSA1);
> writel(DP_MSA2, dp->base + DP_VIDEO_MSA2);
>
> @@ -167,7 +167,7 @@ static void hibmc_dp_link_cfg(struct hibmc_dp_dev *dp, struct dp_mode *mode)
> dp_write_bits(dp->base + DP_VIDEO_CTRL, DP_CFG_STREAM_RGB_ENABLE, 0x1);
> dp_write_bits(dp->base + DP_VIDEO_CTRL, DP_CFG_STREAM_VIDEO_MAPPING, 0);
>
> - /*divide 2: up even */
> + /* divide 2: up even */
> if (timing_delay % 2)
> timing_delay++;
>
This should be squashed into the previous commits.
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.h b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.h
> new file mode 100644
> index 000000000000..6b07642d55b8
> --- /dev/null
> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.h
> @@ -0,0 +1,48 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/* Copyright (c) 2024 Hisilicon Limited. */
> +
> +#ifndef DP_KAPI_H
> +#define DP_KAPI_H
> +
> +#include <linux/types.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_encoder.h>
> +#include <drm/drm_connector.h>
> +#include <drm/drm_print.h>
> +#include <linux/delay.h>
Sort the headers, please.
> +
> +struct hibmc_dp_dev;
> +
> +struct dp_mode {
> + u32 h_total;
> + u32 h_active;
> + u32 h_blank;
> + u32 h_front;
> + u32 h_sync;
> + u32 h_back;
> + bool h_pol;
> + u32 v_total;
> + u32 v_active;
> + u32 v_blank;
> + u32 v_front;
> + u32 v_sync;
> + u32 v_back;
> + bool v_pol;
> + u32 field_rate;
> + u32 pixel_clock; // khz
Why do you need a separate struct for this?
> +};
> +
> +struct hibmc_dp {
> + struct hibmc_dp_dev *dp_dev;
> + struct drm_device *drm_dev;
> + struct drm_encoder encoder;
> + struct drm_connector connector;
> + void __iomem *mmio;
> +};
> +
> +int hibmc_dp_kapi_init(struct hibmc_dp *dp);
> +void hibmc_dp_kapi_uninit(struct hibmc_dp *dp);
> +int hibmc_dp_mode_set(struct hibmc_dp *dp, struct dp_mode *mode);
> +void hibmc_dp_display_en(struct hibmc_dp *dp, bool enable);
It looks like this should also be defined earlier.
> +
> +#endif
> --
> 2.33.0
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists